Претраживање
Приказ резултата 1001-1010 од 1104
Structural and electronic properties of screen-printed Fe2O3/TiO2 thick films and their photoelectrochemical behavior
(Springer US, 2017)
Nanostructured Fe2TiO5 thick films were deposited on fluorine-doped tin oxide glass substrate using screen printing technology. Starting hematite and anatase nanopowders were mixed in molar ratios 1:1 and 1:1.5 and calcined ...
Behaviour of non-standard composition copper bearing anodes from the copper refining process
(Elsevier Science Bv, Amsterdam, 2010)
This paper addresses on investigation the possibility of electrolytic treatment the sulphur acidic waste solution, obtained in the conventional electrolytic copper refining process. Beside the high copper concentration, ...
Microstructure and phase composition of steatite ceramics sintered by traditional and spark plasma sintering
(Belgrade : ETRAN, 2018)
The influence of the sintering method on the mineral phase transformations and development of the crystalline microstructure of steatite ceramics was investigated. The steatite samples were fabricated from talc and bentonite ...
Al2Mo3O12/polyethylene composites with reduced coefficient of thermal expansion
(Springer, 2014)
Recently, polymer composites reinforced with low fractions of thermomiotic nanoceramics have triggered a lot of research. The efforts have been focused on achieving considerable reduction of the coefficient of thermal ...
Building technology platform aimed to develop service robot with embedded personality and enhanced communication with social environment
(Elsevier, 2015)
The paper is addressed to prototyping of technology platform aimed to develop of ambient-aware human-centric indoor service robot with attributes of emotional intelligence to enhance interaction with social environment. ...
Cross-Linkable Modified Nanocellulose/Polyester Resin-Based Composites: Effect of Unsaturated Fatty Acid Nanocellulose Modification on Material Performances
(Weinheim : WILEY‐VCH Verlag GmbH & Co. KGaA, 2018)
Unsaturated fatty acid (FA)–modified nanocellulose (m-NC) shows potential application in improving mechanical properties of unsaturated polyester/m-NC nanocomposites (UPe/m-NC). A polyester matrix is obtained by polycondensation ...
The fractal nature approach in ceramics materials and discrete field simulation
(ETRAN, 2018)
In this paper, we present experimental data of static fractals and compare the results with theoretical analysis obtained using dynamic particle simulation. The fractal simulator presented in this manuscript is pioneer ...
Thermal and mechanical properties of polyamide 11 based composites reinforced with surface modified titanate nanotubes
(Elsevier, 2015)
The preparation of polyamide 11 (PA11) based composites reinforced with pristine and surface-modified titanate nanotubes (TTNT) is reported. Twin-screw melt compounding was used to produce composites with up to 2. wt% of ...
Advantages of combined sintering compared to conventional sintering of mechanically activated magnesium titanate
(Belgrade : International Institute for the Science of Sintering, 2014)
In this article, the advantages of combined sintering in comparison with the conventional one, of mechanically activated magnesium titanate ceramic were investigated. The stoichiometric mixtures of MgO and TiO2 were ...
Active hip orthosis for assisting the training of the gait in Hemiplegics
(Kragujevac : University of Kragujevac, Faculty of Science, 2018)
The gait restoration is a significant component of the rehabilitation of patients with hemiplegia after central nervous system lesion. The typical symptom of the disability is the lack of hip extension during the stance ...