Now showing items 1-6 of 6
Structural investigation of mechanically activated ZnO powder
Abstract Commercially available ZnO powder was mechanically activated in a planetary ball mill. In order to investigate the specific surface area, pore volume and microstructure of non-activated and mechanically activated ...
The effect of Hot Isostatic Pressing on the MT sample densities
(Belgrade : Serbian Ceramic Society, 2015)
Mechanically activated powders (0, 10, 40, 80 and 160 minutes) were formed by isostatic pressure 300 MPa to cylindrical green bodies (φ 12 mm). First set of samples was sintered at 1300°C for 30 min in air (heating rate ...
Uticaj mehaničke aktivacije na svojstva MgO-TiO2 elektrokeramike
(Čačak : University of Kragujevac, Faculty of Technical Sciences, 2015)
Intenzivan razvoj elektronike najvećim delom zavisi od razvoja novih materijala, koji se pored strogo određenog sastava odlikuju i tačno određenom raspodelom defekata i primesa. Sa sve rasprostranjenijom primenom tehnike ...
The influence of compaction pressure on the density and electrical properties of cordierite-based ceramics
(Belgrade : International Institute for the Science of Sintering, 2015)
Due to its characteristics, cordierite, 2MgO·2Al2O3·5SiO2, is a high-temperature ceramic material of a great scientific interest. Mechanical activation of the starting mixtures containing 5.00 mass% TiO2 was performed in ...
Reaction kinetics of mechanically activated cordierite based ceramics studied via DTA
(Ljubljana : Central and Eastern European Committee for Thermal Analysis and Calorimetry, 2015)
Cordierite, 2MgO•2Ah03•5Si02 (MAS), is a very attractive high-temperature ceramic material. In order to accelerate the process of sintering, 5.00 mass% Mo03 was added to the starting mixtures. The mechanical activation of ...
Investigation of thermally induced processes in corundum refractory concretes with addition of fly ash
(Springer Netherlands, 2015)
The effects that the fly ash addition has on the behavior of thermally resistant corundum concrete were discussed. Experimental program implied production of two refractory composites: "referent" concrete from 20 % of ...