Search
Now showing items 1-10 of 10
The influence of mechanical activation on the electrical properties of Ba0.77Sr0.23TiO3 ceramics
(Belgrade : Serbian Ceramic Society, 2013)
Ferroelectric ceramic barium strontium titanate (Ba0.77Sr0.23TiO3), BST, was prepared by solid-state reactions using starting powders of barium carbonate (BaCO3), strontium carbonate (SrCO3) and titanium dioxide (TiO2-anatase). ...
Structural characterization of mechanically activated MgO-TiO2 system
(Belgrade : Serbian Ceramic Society, 2013)
In this article the influence of ball miling process on structure of MgO-TiO2 system was investigated. The mixtures of MgO-TiO2 powders were mechanically activated in a planetary ball mill for the time period from 0 to 120 ...
Characterization of mechanically activated ZnO powder
(Belgrade : Serbian Ceramic Society, 2013)
Materials based on ZnO structure have more frequently application as fillers in polymer ceramics nanocompozites. Performances of these materials depends on fillers morphology, surfaces texture and particles size. According ...
Dilatometric Analysis of Mechanically Activated SrTiO3 Powder
(Belgrade : Serbian Ceramic Society, 2013)
Strontium-titanate powder was mechanically activated in a planetary ball mill for 0, 5, 10, 30, 60, 90 and 120 minutes. Non-isothermal sintering of non-activated and activated SrTiO3 powder samples in the temperature ...
Surface characterisation of mechanochemicaly activated carbon cloth
(Belgrade : Materials Research Society of Serbia, 2013)
Adsorption on activated carbon cloth is an efficient procedure for removing pollutants from wastewaters, because this material possesses large specific area and high adsorption capacity. In
this study the activated carbon ...
Influence of prolonged sintering time on density and electrical properties of isothermally sintered cordierite-based ceramics
(Belgrade : International Institute for the Science of Sintering, 2013)
Mechanical activation is a commonly used and relatively fast and inexpensive procedure for sample preparation before the sintering process. Cordierite, a stoichiometric mixture of three different oxides (2MgO⋅2Al2O3⋅5SiO2) ...
Sintering of the mechanically activated MgO-TiO2 system
(Hanyang University Press, 2013)
Mixtures of MgO-TiO2 powders were mechanically activated in a planetary ball mill for a time interval from 0 to 120 minutes. The influence of the mechanical activation on the phase composition and crystal structure have ...
Influence of MoO3 on sintering temperature of mechanically activated MgO-Al2O3-SiO2 system
(Belgrade : Serbian Ceramic Society, 2013)
Cordierite, 2MgO⋅2Al2O3⋅5SiO2, is a very attractive high-temperature ceramic material, due to its outstanding electrical characteristics, such as the low temperature expansion coefficient, low dielectric constant and good ...
Density and electrical properties of cordierite based ceramics as function of compaction pressure
(Belgrade : Serbian Ceramic Society, 2013)
Mechanical activation is widely used and relatively inexpensive procedure for sintering process sample preparation. However, the influence of pressure, which is used for compaction, has not been completely investigated. ...
Influence of one activated component on the sintering process of three phase system
(Belgrade : Materials Research Society of Serbia, 2013)
According to its low temperature thermal expansion coefficient, low dielectric constant, also good mechanical properties, cordierite, 2MgO×2Al2O3×5SiO2, represents a very attractive hightemperature ceramic material. In ...