Претраживање
Приказ резултата 41-50 од 176
Influence of mechanical activation on structural and electrical properties of sintered MgTiO3 ceramics
(Belgrade : International Institute for the Science of Sintering, 2009)
The aim of this work was to analyze the influence of mechanical activation on the MgCO3-TiO2 system. Mixtures of MgCO3-TiO2 were mechanically activated for 15, 30, 60 and 120 minutes in a planetary ball mill and after that ...
Influence of different pore-forming agents on wollastonite microstructures and adsorption capacities
(Elsevier, 2017)
In this study, porous macro- and micro-cellular wollastonite-based ceramics was synthesized. A ceramic precursor, methylhydrocyclosiloxane, together with micro-sized CaCO3, was used as a starting material. After 20 min of ...
Artificial fly ash based aggregates properties influence on lightweight concrete performances
(Elsevier, 2015)
The effect of the application of pelletized fly ash based aggregates obtained through different processing techniques on the behavior of lightweight concretes was analyzed. Experimental program implied production of four ...
Formation of porous wollastonite-based ceramics after sintering with yeast as the pore-forming agent
(Belgrade : International Institute for the Science of Sintering, 2017)
In this paper, synthesis of porous wollastonite-based ceramics was reported. Ceramic precursor, methylhydrocyclosiloxane, together with micro-sized CaCO3, was used as starting material. After 20 min of ultrasound treatment, ...
Effects of mechanical activation and two-step sintering on the structure and electrical properties of cordierite-based ceramics
(Elsevier, 2016)
The mechanical activation can help reduce production costs and modify cordierite-based materials. In this study, the structure and electrical properties of the mechanically activated MgO-Al2O3-SiO2 system have been analyzed. ...
Reheating of zinc-titanate sintered specimens
(Belgrade : International Institute for the Science of Sintering, 2015)
The scope of this work was observing dimensional and heat transfer changes in ZnTiO3 samples during heating in nitrogen and air atmosphere. Interactions of bulk specimens with gaseous surrounding induce microstructure ...
The Influence of Sintering Parameters and Subsequent Thermal Treatment on U-I Characteristics and Degradation of ZnO Varistors
(New York; London : Plenum Press, 1987)
The fabrication of varistor ceramics, characterized by stable electrical properties, was considered on the basis of sintering parameters and subsequent thermal treatment. The process of accelerated degradation of electrical ...
Adsorption capacity of wollastonite based adsorbents with porous structure controlled with different progeny agents
(Belgrade : Serbian Ceramic Society, 2016)
Porous wollastonite (WL) based adsorbents were fabricated by a pressureless sintering process by using low molecular weight poly(methyl methacrylate) (PMMA), nanocellulose (NC) and yeast as the pore forming agents. WL based ...
The influence of mechanical activation on the electrical properties of Ba0.77Sr0.23TiO3 ceramics
(Elsevier, 2014)
Ferroelectric barium strontium titanate (Ba0.77Sr0.23TiO3), BST, was prepared by solid-state reactions using as the starting compounds powder of barium carbonate (BaCO3), strontium carbonate (SrCO3) and titanium dioxide ...
Influence of Bi2O3 on microstructure and electrical properties of ZnO-SnO2 ceramics
(Belgrade : International Institute for the Science of Sintering, 2007)
The effects of small amounts (0.5; 1.0 and 1.5 mol. %) of bismuth oxide on the microstructure and electrical properties of ZnO-SnO2 ceramics have been studied. Starting powders of ZnO and SnO2 were mixed in the molar ratio ...