Претраживање
Приказ резултата 21-30 од 37
Tailoring and Processing of Defect Free Barium Titanate Stannate Functionally Graded Ceramics: BTS2.5/BTS5/BTS7/BTS10 FGMs
(Paris : Atlantis Press, 2017)
Four-component barium titanate stannate (BaTi1−x Sn x O3, BTS) functionally graded materials (FGMs) were designed, processed and examined. BTS powders with different tin content (x = 0.025, 0.05, 0.07 and 0.10, abbreviated ...
Microwave Electro Ceramic Based on Magnesium Titanate Compounds
(Paris : Atlantis Press, 2017)
The intensive progress in electronics, especially telecommunication and mobile phone in 1990s, was the main driving force for the extensive research and development of microwave ceramics. These materials are often used in ...
Properties of the cement-based composites with high content of metakaolin
(Dordrecht : Springer, 2018)
Environmental concerns and sustainable development require increased replacement of cement. Most of previous studies have shown that the compressive strength of cement-based composites is maximized with a 20% content of ...
Compressive Strength Improvements of Cement-Based Composites Achieved with Additional Milling of Metakaolin
(Dordrecht : Springer, 2018)
Kaolin from a Serbian deposit, having a high content of mica and quartz, disordered kaolinite and a high specific surface area, was used to prepare metakaolin (MK). The calcination at temperatures of 700 °C or 750 °C for ...
Environmental Aspects of Red Mud and Its Utilization as a Component of Building Materials
(Paris : Atlantis Press, 2017)
The Bayer process is the main industrial process covering 90 % of global production of alumina. The sintering process deals with the medium and low grades of bauxite resource. During the alumina production process, red mud ...
Numerical simulation of transient response of chemical and biological micro/nanofabricated sensors operating in multianalyte environments
(IEEE, 2014)
In different kinds of surface-based chemical and biological micro/nanosensors, interpretation of the experimentally obtained data is performed based on approximate solutions for the sensor response, valid for the case of ...
Characterization and microstructure evolution in Er-DOPED BaTiO3 ceramics
(Hoboken, NJ : John Wiley & Sons, 2010)
BaTiO3-ceramics are known as some of the most useful electroceramics with a various applications. In this study the effect of Er 2O3 as additive on the microstructure and dielectric properties of doped BaTiO3 was investigated. ...
Application of Nanocrystalline Pseudobrookite (Fe2TiO5) Thick Films for Humidity Sensing
(IEEE Computer Society, 2018)
Pseudobrookite nanocrystalline thick films were screen printed on alumina substrate with small interdigitated PdAg electrodes (width 6 mm, length 12 mm, electrode spacing 0.2 mm) and fired at 600°C for 30 minutes. Scanning ...
Accuracy improvements of consumer-grade 3D sensors for robotic applications
(IEEE, 2013)
Recent advances in development of low-cost 3D sensors, such as Microsoft Kinect, bring attractive opportunities to robot system integrators. The accuracy provided by such sensors is generally unsatisfactory for many robotic ...
Nanocomposite Zn2SnO4/SnO2 Thick films as a Humidity Sensing Material
(IEEE, 2019)
Nanocomposite Zn2SnO4/SnO2 powder was obtained by solid state synthesis from homogenized starting nanopowders of ZnO and SnO2 mixed in the 1:1 molar ratio, structurally and morphologically characterized using X-ray diffraction ...