Претраживање
Приказ резултата 31-40 од 66
Investigation of Mechanism and Critical Parameters for Removal of Arsenic from Water using Zr-TiO2 Composite
(Taylor & Francis, 2017)
Using microwave-hydrothermal method for synthesis of composite, high surface density of hydroxyl groups, as an active adsorption sites for arsenic, was obtained. Adsorption mechanisms of As(III) and As(V) onto zirconium ...
The influence of mechanical activation on structural evolution of nanocrystalline SrTiO3 powders
(Elsevier, 2017)
Structural changes caused by mechanical activation of SrTiO3 powders were investigated using a variety of methods. Average crystallite size continuously decreased with increased activation time to around 20 nm after 120 ...
Sintering of fly ash based composites with zeolite and bentonite addition for application in construction materials
(International Institute for the Science of Sintering, 2017)
Due to pozzolanic characteristics, fly ash is commonly used as a cement replacement in construction composites. Addition of natural clays with sorption ability (i.e. zeolite and bentonite) in to the fly ash based construction ...
Estimation of fractal representation of wind speed fluctuation by artificial neural network with different training algorothms
(Elsevier, 2017)
Since the wind speed fluctuation could cause large instability in wind energy systems it is crucial to develop a method for precise estimation of the wind speed fluctuation. Fractal interpolation of the wind speed could ...
The influence of fluorine doping on the structural and electrical properties of the LiFePO4 powder
(Elsevier, 2017)
Low intrinsic electronic conductivity is the main disadvantage of LiFePO4 when used as a cathode material in lithium ion batteries. The paper offers experimental proofs of the theoretical prediction that fluorine doping ...
Electrical properties of magnesium titanate ceramics post-sintered by hot isostatic pressing
(Belgrade : International Institute for the Science of Sintering, 2017)
Post-sintering of magnesium titanate ceramics by hot isostatic pressing (HIP) in an oxygen-free atmosphere significantly alters various electrical properties of the product. In particular, the sintered material becomes a ...
Defining the Editorial Policies of Open Access Journals in Serbia and the Role of Librarians in This Process
(Novi Sad : Faculty of Philosophy, University of Novi Sad, 2017)
The paper discusses the process of devising an editorial policy template intended for Serbian Open Access journals and the role of librarians in this process. The template was developed with the idea to provide assistance ...
Synthesis and thermal stability of cis-dichloro[(E)-ethyl-2-(2-((8-hydroxyquinolin-2-il)methylene)hidrazinyl)acetate-κ2 N]-palladium(II) complex
(Springer Netherlands, 2017)
The structure of new cis-dichloro[(E)-ethyl-2-(2-((8-hydroxyquinolin-2-il)methylene)hidrazinyl)acetate-κ2 N]-palladium(II) complex was determined using a combination of XRD and IR measurements and DFT calculations. Inherent ...
Insertion of lithium ion in anatase TiO2 nanotube arrays of different morphology
(Elsevier, 2017)
Anatase TiO2 nanotube arrays of different morphology were prepared by a two-step process: anodic oxidation at voltages 20–60 V and subsequent annealing at 400 °C. By amplifying anodization voltage the inner diameter of ...
Influence of different bonding and fluxing agents on the sintering behavior and dielectric properties of steatite ceramic materials
(Elsevier, 2017)
The focus of the study was on providing insights into interconnections between sintering and development of the crystalline microstructure, and consequently variations in dielectric behavior of four steatites fabricated ...