Pretraživanje
Prikaz rezultata 31-40 od 60
Tailoring and Processing of Defect Free Barium Titanate Stannate Functionally Graded Ceramics: BTS2.5/BTS5/BTS7/BTS10 FGMs
(Paris : Atlantis Press, 2017)
Four-component barium titanate stannate (BaTi1−x Sn x O3, BTS) functionally graded materials (FGMs) were designed, processed and examined. BTS powders with different tin content (x = 0.025, 0.05, 0.07 and 0.10, abbreviated ...
Facile synthesis of poly(ε-caprolactone) micro and nanospheres using different types of polyelectrolytes as stabilizers under ambient and elevated temperature
(Elsevier, 2013)
Poly(ε-caprolactone) (PCL) particles were prepared by physicochemical method with solvent/non-solvent systems. The synthetic polymer polyvinylpyrrolidone (PVP) and natural polymer poly(α,γ,l-glutamic acid) (PGA), were used ...
Preparation and properties of porous, biomorphic, ceria ceramics for immobilization of Sr isotopes
(Elsevier, 2013)
A new technology for radionuclide trapping which is based on bio-templating approach was proposed in this paper. Porous oxide ceramics was prepared by wet impregnation of biological template with water solution of cerium ...
Peculiarities in sintering behavior of Ca-deficient hydroxyapatite nanopowders
(Elsevier, 2012)
We report unusual sintering behavior of Ca-deficient hydroxyapatite processed with different heating rates; particularly, faster heating resulted in higher densification. We hypothesize that faster heating delays formation ...
Dense fine-grained biphasic calcium phosphate (BCP) bioceramics designed by two-step sintering
(Elsevier, 2011)
In this study, dense, fine-grained biphasic calcium phosphate bioceramics were designed via the two-step sintering method. The starting powder was nanosized calcium-deficient hydroxyapatite, whose phase composition, average ...
Microstructure and dielectric properties of Dy/Mn doped BaTiO3 ceramics
(Elsevier, 2014)
Dy/Mn doped BaTiO3 with different Dy2O3 contents, ranging from 0.1 to 5.0 at% Dy, were investigated regarding their microstructural and dielectric characteristics. The content of 0.05 at% Mn was constant in all the ...
Microstructure evolution and phase transition in Er doped BaTiO3 ceramics
(Belgrade : Serbian Ceramic Society, 2013)
The Er doped BaTiO3 ceramics, with different Er2O3 content, ranging from 0.01 to 1.0 wt% Er, were investigated regarding their microstructural and dielectric characteristics in this paper. Doped BaTiO3 were prepared by ...
Characterization and microstructure evolution in Er-DOPED BaTiO3 ceramics
(Hoboken, NJ : John Wiley & Sons, 2010)
BaTiO3-ceramics are known as some of the most useful electroceramics with a various applications. In this study the effect of Er 2O3 as additive on the microstructure and dielectric properties of doped BaTiO3 was investigated. ...
Ho2O3 Additive Effects on Microstructure and Dielectrical Properties of BaTiO3 Ceramics
(Belgrade : Serbian Ceramic Society, 2012)
Doped BaTiO3-ceramics is very interesting for its application as resistors with PTCR, multilayer ceramics capacitors, thermal sensors etc. Ho doped BaTiO3 ceramics, with different Ho2O3 content, ranging from 0.01 to 1.0 ...
Preparation of nanostructured Zn-Cr-O spinel powders by ultrasonic spray pyrolysis
(Elsevier Sci Ltd, Oxford, 2001)
Ultrasonic spray pyrolysis (1.7 MHz) has been applied for the generation of zinc chromium oxide submicronic (470 nm) particles from the corresponding metal nitrate solution. Heterogeneous gas-liquid/solid chemical reactions ...