Приказ резултата 31-40 од 148
Structural analysis of Zn2TiO4 doped with MgO
The starting mixtures of ZnO, TiO2, and MgO (0, 1.25, and 2.5 wt.%) powders are mechanically activated in a high-energy planetary mill for 15 min and then sintered between 800 and 1100°C for 2 h. The influence of MgO ...
Structural characterization and electrical properties of sintered magnesium-titanate ceramics
(Belgrade : Materials Research Society of Serbia, 2012)
In this article the influence of ball milling process on structure of MgO-TiO2 system, along with its influence on electrical properties of post-sintering samples, were investigated. Mixtures of MgO-TiO2 powders were ...
Molecular design of nanoparticles and functional materials by sintering
(Beograd : Tehnološko-metalurški fakultet Univerziteta u Beogradu, 2012)
Nanosized powders present an excellent starting point for the formation of nonporous materials during the sintering process. Narrow particle size distributions and sufficiently small sizes of the precursor powders typically ...
Structural analyses of sintered MT and BZT ceramics
(Belgrade : Serbian Society for Microscopy, 2010)
Development of dielectric materials is increasing with a rapid progress in mobile and satellite communications systems, where magnesium titanates find their place owing to good dielectric properties. Recently it has been ...
The master sintering curves for BaTi0.975Sn0.025O3/BaTi0.85S n0.15O3 functionally graded materials
The most important aim in the design and processing of functionally graded materials (FGMs) is to produce devices free from any deformation. Smart choices of different combination of graded layers, as well as the heating ...
Inert atmosphere processing of hydroxyapatite in the presence of lithium iron phosphate
(Journal of the European Ceramic Society, 2018)
The present study describes sintering behaviour of hydroxyapatite (HAp) upon addition of lithium iron phosphate (LFP) (1-10 wt.%) system in inert (Ar) atmosphere. The interaction between materials and melting of LFP ...
Designing, fabrication and characterization of nanostructured functionally graded HAp/BCP ceramics
Nanostructured calcium phosphate functionally graded materials (FGMs) with simultaneous gradients of density, phase composition, and mechanical properties were fabricated by consecutive uniaxial pressing of stoichiometric ...
Synthesis of Cordierite-Based Ceramics : monograph
(Belgrade : Academic Mind, 2016)
Advanced ceramic materials include a large number of new materials, which are very different by their nature. These materials are the result of the demands of modern technologies for operation at high temperatures and ...
Sintering of Zinc-Titanate
(Atlantis Press, 2016)
Sintering kinetics of the mechanically activated ZnO-TiO2 system was studied. Mixtures of ZnO and TiO2 powders were mechanically activated using a high-energy ball mill for different time intervals from 0 to 300 min. Formal ...
Properties of Magnesium Titanate Ceramic Obtained by Two Stage Sintering
Poster presented at the III Serbian Ceramic Society Conference, 29th September - 1st October, Belgrade, 2014