Now showing items 1-10 of 804
Influence of process parameters of simultaneous anodization/anaphoretic electrodeposition synthesis of hydroxyapatite/titanium oxide composite coatings on adhesion
(Padova : Societa chimica italiana, Divisione di Elettrochimica, 2019)
In-situ synthesis of hydroxyapatite/titanium oxide (HAp/TiO2) coating on titanium was performed via anaphoretic deposition of hydroxyapatite (HAp) and simultaneous anodization of Ti to produce highly adherent and strengthened ...
Effect of Mechanical Activation on the Densification Behavior of MgAl2O4 Spinel
(The Ceramic Society of Japan, 2019)
Magnesium aluminate and other alumina-based spinels attract attention due to their high hardness, high mechanical strength, and low dielectric constant. MgAl2O4 was produced by solid-state reaction between MgO and a-Al2O3 ...
Improved electrolyte for zinc-polyaniline batteries
Poster presented at the 37th International conference of the Slovak Society of Chemical Engineering, Vysoké Tatry, Slovakia, May 24-28, 2010
Electrochemical characterization of polyaniline electrode for use in electrochemical power sources
(Nice : International Society of Electrochemistry, 2010)
Polyaniline (PANI) electrode was formed by electrochemical synthesis on graphite under galvanostatic condition at current density of 2.0 mA cm-2 from aqueous solution of 1.0 mol dm-3 HCl and 0.25 mol dm-3 aniline. ...
Morphological and structural characterization of spinel MgAl2O4
(Belgrade : Serbian Ceramic Society, 2019)
Magnesium aluminate has spinel structure and very good mechanical, chemical, and thermal properties. Owing to these properties, it has a wide range of applications including refractory ceramics, optically transparent ceramic ...
Structural and electrical properties of sintered MgTiO3 ceramics
(Faenza : ISTEC-CNR, 2008)
Ceramics for electronics play an important role in several industrial sectors. The most common way of producing these ceramics is through sintering processes from powders. The powders can be treated by mechanical activation; ...
Nanocomposite Zn2SnO4/SnO2 Thick films as a Humidity Sensing Material
Nanocomposite Zn2SnO4/SnO2 powder was obtained by solid state synthesis from homogenized starting nanopowders of ZnO and SnO2 mixed in the 1:1 molar ratio, structurally and morphologically characterized using X-ray diffraction ...
Synthesis of cathode composite powders from methylcellulose matrix: Li2FeSiO4/C, Li2FeP2O7/C and LiFePO4/C
([s.l.] : [s.n.], 2019)
Since Padhi et al. reported the electrochemical properties of LiFePO4 in 1997 , polyanion cathode materials for lithium-ion batteries attract interest of researchers because of the added safety and higher voltage values ...
A novel type of building material derived from the by-products of steel making industry
(Belgrade : Materials Research Society of Serbia, 2019)
Electric arc furnace slag (EAFS) and electric arc furnace dust (EAFD) are the waste materials generated during the iron and steel scrap remelting in electric arc furnace. EAFS is non-hazardous material which has found its ...
Nano-bioresorbable polymer spheres as carriers for transdermal delivery of ketoprofene
(Belgrade : Institute of Technical Sciences of SASA, 2010)
The transdermal delivery system provides a highly efficient, safe, and easy to use method for delivering active ingredients and other compounds to the body through intact skin, thereby offering many other advantages over ...