Претраживање
Приказ резултата 11-20 од 609
Effect of the vinyl modification of multi-walled carbon nanotubes on the performances of waste poly(ethylene terephthalate)-based nanocomposites
(SAGE, 2017)
Production of high-performance nanocomposite materials obtained from unsaturated polyester resin, based on products of the waste poly(ethylene terephthalate) recycling, and modified multi-walled carbon nanotubes is presented. ...
Ni-MoO2 composite cathodes for hydrogen evolution in alkaline solution: Effect of aging of the electrolyte for their electrodeposition
(Belgrade : Serbian Chemical Society, 2013)
In this work the effect of aging of the electrolyte for electrodeposition of Ni-MoO2 composite coatings on their morphology (scanning electron microscopy), chemical composition (energy-dispersive X-ray spectroscopy), ...
ZnTiO3 ceramic nanopowder microstructure changes during compaction
(Belgrade : International Institute for the Science of Sintering, 2013)
ZnTiO3 nanopowder as a constitutive component in compact production was primarily characterized. Scanning electron micrographs of as received powder were recorded. Mercury porosimetry and nitrogen adsorption were also ...
Preparation of MEMO silane-coated SiO2 nanoparticles under high pressure of carbon dioxide and ethanol
(Elsevier, 2010)
The objective of this study is to investigate and compare methods of nanosilica coating with γ-methacryloxypropyltrimethoxy (MEMO) silane using supercritical carbon dioxide and carbon dioxide-ethanol mixture. Characterization ...
Novel membrane-supported hydrogel for removal of heavy metals
(Elsevier, 2015)
Polyethersulfone membranes with integrated negatively-charged hydrogel of crosslinked poly(acrylamido-2-methylpropane sulfonic acid) were prepared by a combination of a liquid phase inversion process with photopolymerization ...
The influence of mechanochemical activation and thermal treatment on magnetic properties of the BaTiO3 -FexOy powder mixture
(Belgrade : International Institute for the Science of Sintering, 2015)
Powder mixture of 50 mass % of barium titanate (BaTiO3) and 50 mass % of iron (Fe) was prepared by solid-state reaction technique, i.e. ball milled in air for 60 min, 80 min, 100 min, 120 min and 150 min. During mechanochemical ...
The fractal nature materials microstructure influence on electrochemical energy sources
(Belgrade : International Institute for the Science of Sintering, 2015)
With increasing of the world energy crisis, research for new, renewable and alternative energy sources are in growth. The focus is on research areas, sometimes of minor importance and applications, where the different ...
The initial characteristics of the polypyrrole based aqueous rechargeable batteries with supercapattery characteristics
(Elsevier, 2019)
The electrochemically synthesized polypyrrole (PPy) is investigated as a possible active material of the low-cost aqueous based secondary power sources in combination with zinc, lead oxide, and lead sulfate. The discharge ...
Al2Mo3O12/polyethylene composites with reduced coefficient of thermal expansion
(Journal of Materials Science, 2014)
Recently, polymer composites reinforced with low fractions of thermomiotic nanoceramics have triggered a lot of research. The efforts have been focused on achieving considerable reduction of the coefficient of thermal ...
Choline chloride-based deep eutectic solvents in CaO-catalyzed ethanolysis of expired sunflower oil
(Journal of Molecular Liquids, 2018)
Choline chloride (ChCl)-based deep eutectic solvents (DESs) with different amides or polyols as hydrogen bond donors were tested as cosolvents in the ethanolysis of expired sunflower oil catalyzed by either calcined or ...