Shungite – a carbon-mineral rock material: Its sinterability and possible applications
Pavlović, Vladimir B.
Article (Published version)
MetadataShow full item record
The paper presents results of the influence of mechanical activation of shungite, a carbon-mineral rock material rich in silica and carbon, on its sintering behaviour, and obtaining of pure SiC ceramics. The mechanical activation of the starting powder was performed in a high-energy ball mill in time intervals from 30 to 480 min. The phase composition of the starting powders and sintered samples was analysed by the X-ray diffraction method. The first traces of SiC were detected after sintering at 1350 °C for 2 h in an Ar atmosphere, along with traces of unreacted SiO2. The scanning electron microscopy was performed in order to determine changes in the microstructure. Sintering was performed at various temperatures for 2 h, in an Ar atmosphere and a vacuum. Dielectric properties of the sintered samples were measured in the frequency range from 1 to 500 MHz. The obtained results indicate that the sintered powder is a good candidate for applications as an absorber of electromagnetic waves... in microwave engineering. © 2019 University of Novi Sad, Faculty of Technology. All rights reserved.
Keywords:carbon-mineral rock material / mechanical activation / SEM / sintering / XRD
Source:Processing and Application of Ceramics, 2019, 13, 1, 89-97
- Novi Sad : Faculty of Technology, University of Novi Sad