The Influence of Sintering Parameters and Subsequent Thermal Treatment on U-I Characteristics and Degradation of ZnO Varistors
Само за регистроване кориснике
Остала ауторстваKuczynski, George Czeslaw
Palmour III, Hayne
Ristić, Momčilo M.
Конференцијски прилог (Објављена верзија)
МетаподациПриказ свих података о документу
The fabrication of varistor ceramics, characterized by stable electrical properties, was considered on the basis of sintering parameters and subsequent thermal treatment. The process of accelerated degradation of electrical characteristics in severe conditions was analysed. The measured K–J curves were used for the determination of electric parameters. The comparative analysis of these results and electronic paramagnetic resonance data1 was the basis of the conclusions concerning the formation of potential barrier, its improvement and subsequent degradation at the grain boundary.
Кључне речи:varistor ceramics / electrical properties / sintering / ZnO varistors
Извор:Sintering’85, 1987, 301-308
- New York; London : Plenum Press