Sintering of alumina doped with different oxides, followed by sensitive dilatometer
Pavlović, Vladimir B.
Остала ауторстваUskoković, Dragan
Radmilović, Velimir R.
Конференцијски прилог (Објављена верзија)
МетаподациПриказ свих података о документу
Sintered alumina powder represents suitable material for usage in various industry fields (e.g., as chip carriers in electronics, microwaves, jewelry production), due to convenient physical properties, such as sinterability, electrical and mechanical features. Those properties can be modified by addition of different oxides and/or mechanical treatment. Therefore, in this investigation the alumina was doped with 1 wt. % of Cr2O3, Mn2O3 and NiO, respectively, followed by 1 hour of mechanical activation at 400 rpm in planetary ball mill. Sintering of powder mixtures was tracked by sensitive dilatometer up to 1400 °C. The final density values varied from cca. 2 ̶ 3.2 g/cm3. Changes in microstructure were observed by means of SEM. The influence of additives along with mechanical activation is monitored trough changes in electrical permittivity and loss tangent. Compared to pure alumina, the additives lower the relative permittivity and increase dielectric losses. For a given mixture, the si...ntering increases the relative permittivity and decreases losses.
Кључне речи:alumina powders / sintering / doping
Извор:Programme and The Book of Abstracts / Twentieth Annual Conference YUCOMAT 2018, Herceg Novi, September 3-7, 2018, 2018, 95-95
- Belgrade : Materials Research Society of Serbia