Show simple item record

dc.creatorLabus, Nebojša
dc.creatorVasiljević, Zorka Ž.
dc.creatorVasiljević Radović, Dana
dc.creatorRakić, Srđan
dc.creatorNikolić, Maria Vesna
dc.date.accessioned2018-04-11T10:12:13Z
dc.date.available2018-04-11T10:12:13Z
dc.date.issued2017
dc.identifier.issn0350-820X (Print)
dc.identifier.issn1820-7413 (Online)
dc.identifier.urihttp://dais.sanu.ac.rs/123456789/2364
dc.description.abstractMetastable nanopowder ZnTiO3 was pressed into cylindrical compacts at 200 MPa. Compacts were treated by conventional heating with isothermal holding at 931°C for 10 minutes, 25 minutes and 40 minutes. ZnTiO3 compacts were also heated with a two-step sintering schedule with maximal 913°C and isothermal holding at 896°C, for approximately the same holding times as the isothermal schedule. Shrinkage during heating was monitored with a dilatometric device, while microstructure was determined with atomic force microscopy. XRD patterns were collected for the most interesting samples. Microstructures of sintered specimens showed differences introduced during the last sintering stage by the two different heating schedules. Goal of the presented work was to discuss the possible sintering mechanisms for the two step sintering schedulle according to the presented resultsen
dc.format49 1 (2017) 51-60
dc.formatapplication/pdf
dc.languageen
dc.publisherBelgrade : International Institute for the Science of Sintering
dc.relationinfo:eu-repo/grantAgreement/MESTD/Basic Research (BR or ON)/172057/RS//
dc.rightsopenAccess
dc.sourceScience of Sinteringen
dc.subjectzinc titanate
dc.subjecttwo-step sintering
dc.subjectZnTiO3
dc.subjectnanopowders
dc.titleTwo step sintering of ZnTiO3 nanopowderen
dc.typearticle
dc.rights.licenseBY
dcterms.abstractЛабус, Небојша; Васиљевић, Зорка; Ракић, Срђан; Васиљевић Радовић, Дана; Николић, Мариа Весна;
dc.citation.spage51
dc.citation.epage60
dc.citation.volume49
dc.citation.issue1
dc.identifier.wos000399406900005
dc.identifier.doi10.2298/SOS1701051L
dc.identifier.scopus2-s2.0-85017174871
dc.type.versionpublishedVersion
dc.identifier.fulltexthttp://dais.sanu.ac.rs/bitstream/handle/123456789/2364/Labus, N_Two-step-sintering-of-ZnTiO3nanopowder_2017.pdf


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record