Show simple item record

dc.contributorRistić, Momčilo M.
dc.creatorZlatkov, B. S.
dc.creatorNikolić, Maria Vesna
dc.creatorZeljković, Vladimir
dc.creatorObradović, Nina
dc.creatorPavlović, Vladimir B.
dc.creatorAleksić, Obrad S.
dc.date.accessioned2017-06-10T15:45:07Z
dc.date.issued2011
dc.identifier.issn1820-7413 (Online)
dc.identifier.issn0350-820X (Print)
dc.identifier.urihttp://dais.sanu.ac.rs/123456789/203
dc.description.abstractThe powder injection moulding (PIM) technology is lately becoming more and more significant due to complex design possibilities and good repeatability. This technology requires optimization of all steps starting with material and binder, injection, debinding and sintering parameters. Sintering is one of the key links in this technology. The powder injection moulding process is specific as during feedstock injection powder particles mixed into the binder do not come into mechanical contact. Shrinkage during sintering of PIM samples is high. In this work we have analyzed and modeled the sintering process of isotropic PIM samples of Sr-hexaferrite. The Master Sintering Curve (MSC) principle has been applied to analyze sintering of two types of PIM Sr-hexaferrite samples with completely removed binder and only the extraction step of the debinding procedure (thermal debinding proceeding simultaneously with sintering). Influence of the heating rate on resulting sample microstructures has also been analyzed. Influence of the sintering time and temperature was analyzed using three different phenomenological equations.en
dc.formatapplication/pdf
dc.languageen
dc.publisherBelgrade : International Institute for the Science of Sintering
dc.rightsopenAccess
dc.sourceScience of Sinteringen
dc.subjectsintering
dc.subjectmodeling
dc.subjectstrontium hexaferrite
dc.subjectPIM technology
dc.titleAnalysis and modeling of sintering of Sr-hexaferrite produced by PIM technologyen
dc.typearticle
dc.rights.licenseBY-NC-ND
dcterms.abstractОбрадовић, Нина; Aлексић, Обрад; Златков, Б. С.; Николић, Мариа Весна; Зељковић, Владимир; Павловић, Владимир Б.;
dc.citation.spage9
dc.citation.epage20
dc.citation.volume43
dc.citation.issue1
dc.identifier.doi10.2298/SOS1101009Z
dc.type.versionpublishedVersion
dc.identifier.fulltexthttp://dais.sanu.ac.rs/bitstream/handle/123456789/203/0350-820X1101009Z.pdf


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record