Two step sintering of the ZnTiO3 nanopowder
2015
Аутори
Vasiljević, Zorka Ž.Vasiljević Radović, Dana
Nikolić, Maria Vesna
Labus, Nebojša
Остала ауторства
Matović, BrankoBranković, Zorica
Bučevac, Dušan
Srdić, Vladimir
Конференцијски прилог (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Metastabile nanopowder ZnTiO3 pressed into cylindrical compacts at 200 MPa was submitted to conventional heating with isothermal holding at 931oC for 10 minutes, 25 minutes and 40 minutes. Same compacts were heated with two-step sintering schedule with maximal 912oC and isothermal holding at 896oC, for approximately the same holding times as with isothermal. Shrinkage during heating was monitored with dilatometric device, while microstructure was determined with atomic force microscopy. XRD patterns were collected for the most prominent samples. Sintered specimens microstructure showed differences introduced during last sintering stage by two heating schedules.
Кључне речи:
ZnTiO3 / nanopowders / two-step sinteringИзвор:
Programme and the Book of Abstracts / 3rd Conference of the Serbian Society for Ceramic Materials, 3CSCS-2015, June 15-17, 2015, Belgrade, Serbia, 2015, 101-101Издавач:
- Belgrade : Institute for Multidisciplinary Research, University of Belgrade
Институција/група
Институт техничких наука САНУ / Institute of Technical Sciences of SASATY - CONF AU - Vasiljević, Zorka Ž. AU - Vasiljević Radović, Dana AU - Nikolić, Maria Vesna AU - Labus, Nebojša PY - 2015 UR - https://dais.sanu.ac.rs/123456789/15426 AB - Metastabile nanopowder ZnTiO3 pressed into cylindrical compacts at 200 MPa was submitted to conventional heating with isothermal holding at 931oC for 10 minutes, 25 minutes and 40 minutes. Same compacts were heated with two-step sintering schedule with maximal 912oC and isothermal holding at 896oC, for approximately the same holding times as with isothermal. Shrinkage during heating was monitored with dilatometric device, while microstructure was determined with atomic force microscopy. XRD patterns were collected for the most prominent samples. Sintered specimens microstructure showed differences introduced during last sintering stage by two heating schedules. PB - Belgrade : Institute for Multidisciplinary Research, University of Belgrade C3 - Programme and the Book of Abstracts / 3rd Conference of the Serbian Society for Ceramic Materials, 3CSCS-2015, June 15-17, 2015, Belgrade, Serbia T1 - Two step sintering of the ZnTiO3 nanopowder SP - 101 EP - 101 UR - https://hdl.handle.net/21.15107/rcub_dais_15426 ER -
@conference{ editor = "Matović, Branko, Branković, Zorica, Bučevac, Dušan, Srdić, Vladimir", author = "Vasiljević, Zorka Ž. and Vasiljević Radović, Dana and Nikolić, Maria Vesna and Labus, Nebojša", year = "2015", abstract = "Metastabile nanopowder ZnTiO3 pressed into cylindrical compacts at 200 MPa was submitted to conventional heating with isothermal holding at 931oC for 10 minutes, 25 minutes and 40 minutes. Same compacts were heated with two-step sintering schedule with maximal 912oC and isothermal holding at 896oC, for approximately the same holding times as with isothermal. Shrinkage during heating was monitored with dilatometric device, while microstructure was determined with atomic force microscopy. XRD patterns were collected for the most prominent samples. Sintered specimens microstructure showed differences introduced during last sintering stage by two heating schedules.", publisher = "Belgrade : Institute for Multidisciplinary Research, University of Belgrade", journal = "Programme and the Book of Abstracts / 3rd Conference of the Serbian Society for Ceramic Materials, 3CSCS-2015, June 15-17, 2015, Belgrade, Serbia", title = "Two step sintering of the ZnTiO3 nanopowder", pages = "101-101", url = "https://hdl.handle.net/21.15107/rcub_dais_15426" }
Matović, B., Branković, Z., Bučevac, D., Srdić, V., Vasiljević, Z. Ž., Vasiljević Radović, D., Nikolić, M. V.,& Labus, N.. (2015). Two step sintering of the ZnTiO3 nanopowder. in Programme and the Book of Abstracts / 3rd Conference of the Serbian Society for Ceramic Materials, 3CSCS-2015, June 15-17, 2015, Belgrade, Serbia Belgrade : Institute for Multidisciplinary Research, University of Belgrade., 101-101. https://hdl.handle.net/21.15107/rcub_dais_15426
Matović B, Branković Z, Bučevac D, Srdić V, Vasiljević ZŽ, Vasiljević Radović D, Nikolić MV, Labus N. Two step sintering of the ZnTiO3 nanopowder. in Programme and the Book of Abstracts / 3rd Conference of the Serbian Society for Ceramic Materials, 3CSCS-2015, June 15-17, 2015, Belgrade, Serbia. 2015;:101-101. https://hdl.handle.net/21.15107/rcub_dais_15426 .
Matović, Branko, Branković, Zorica, Bučevac, Dušan, Srdić, Vladimir, Vasiljević, Zorka Ž., Vasiljević Radović, Dana, Nikolić, Maria Vesna, Labus, Nebojša, "Two step sintering of the ZnTiO3 nanopowder" in Programme and the Book of Abstracts / 3rd Conference of the Serbian Society for Ceramic Materials, 3CSCS-2015, June 15-17, 2015, Belgrade, Serbia (2015):101-101, https://hdl.handle.net/21.15107/rcub_dais_15426 .