Two step sintering of the ZnTiO3 nanopowder
АуториVasiljević, Zorka Ž.
Vasiljević Radović, Dana
Nikolić, Maria Vesna
Остала ауторстваMatović, Branko
МетаподациПриказ свих података о документу
Metastabile nanopowder ZnTiO3 pressed into cylindrical compacts at 200 MPa was submitted to conventional heating with isothermal holding at 931oC for 10 minutes, 25 minutes and 40 minutes. Same compacts were heated with two-step sintering schedule with maximal 912oC and isothermal holding at 896oC, for approximately the same holding times as with isothermal. Shrinkage during heating was monitored with dilatometric device, while microstructure was determined with atomic force microscopy. XRD patterns were collected for the most prominent samples. Sintered specimens microstructure showed differences introduced during last sintering stage by two heating schedules.
Кључне речи:ZnTiO3 / nanopowders / two-step sintering
Извор:Programme and the Book of Abstracts / 3rd Conference of the Serbian Society for Ceramic Materials, 3CSCS-2015, June 15-17, 2015, Belgrade, Serbia, 2015, 101-101
- Belgrade : Institute for Multidisciplinary Research, University of Belgrade