Improving the contact surface between TiO2 nanotubes and MAPbBr3 to make perovskite solar cells
2022
Преузимање 🢃
Конференцијски прилог (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
The organo-inorganic perovskites are extraordinary materials that have recently revolutionized the field of photovoltaics due to their low-cost fabrication and high optical absorption. In a short period, they reached great efficiency. Many parameters which affect the quality of perovskite films can be optimized, so the efficiency of these devices can be further improved. In perovskite solar cells, the perovskite layer is an active layer that absorbs the visible part of the spectrum, resulting in the formation of the electron-hole pair. To decrease the recombination of charge carriers, the construction of solar cells requires the existence of two additional layers in order to separate the holes and electrons. TiO2 could be used as an electron transport layer because its conduction band (CB) lies under the CB of perovskite. In that way, electrons diffuse from CB of perovskite to CB of TiO2. For these experiments, TiO2 nanotubular structure provides a one-dimensional transmission channel ...for the charge carriers, which resulting in faster carrier transport. Perovskite methylammonium lead bromide (MAPbBr3) was coupled with TiO2 nanotube arrays which were synthesized by anodization of Ti foil and annealed at 450 °C. The most used methods for deposition of perovskite materials on mesoporous and planar TiO2 are: one-step deposition, two-step sequential deposition, and vapor-assisted solution processing. Disadvantage of these methods is a small contact area between TiO2 and perovskite. The aim of this research was to increase the contact surface of the perovskite and TiO2 nanotubes by filling the nanotubes with the perovskite material in order to improve electron transport.
Кључне речи:
TiO2 nanotubes / perovskite solar cells / MAPbBr3Извор:
Program & Book of Abstracts / Second International Conference ELMINA 2022, Belgrade, Serbia, August 22nd-26th, 2022, 2022, 188-189Издавач:
- Belgrade : Serbian Academy of Sciences and Arts
Финансирање / пројекти:
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200175 (Институт техничких наука САНУ, Београд) (RS-MESTD-inst-2020-200175)
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200135 (Универзитет у Београду, Технолошко-металуршки факултет) (RS-MESTD-inst-2020-200135)
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200287 (Иновациони центар Технолошко-металуршког факултета у Београду доо) (RS-MESTD-inst-2020-200287)
Институција/група
Институт техничких наука САНУ / Institute of Technical Sciences of SASATY - CONF AU - Stefanović, Milica AU - Lukić, Ivana AU - Vujančević, Jelena AU - Petrović, Rada AU - Janaćković, Đorđe PY - 2022 UR - https://dais.sanu.ac.rs/123456789/13636 AB - The organo-inorganic perovskites are extraordinary materials that have recently revolutionized the field of photovoltaics due to their low-cost fabrication and high optical absorption. In a short period, they reached great efficiency. Many parameters which affect the quality of perovskite films can be optimized, so the efficiency of these devices can be further improved. In perovskite solar cells, the perovskite layer is an active layer that absorbs the visible part of the spectrum, resulting in the formation of the electron-hole pair. To decrease the recombination of charge carriers, the construction of solar cells requires the existence of two additional layers in order to separate the holes and electrons. TiO2 could be used as an electron transport layer because its conduction band (CB) lies under the CB of perovskite. In that way, electrons diffuse from CB of perovskite to CB of TiO2. For these experiments, TiO2 nanotubular structure provides a one-dimensional transmission channel for the charge carriers, which resulting in faster carrier transport. Perovskite methylammonium lead bromide (MAPbBr3) was coupled with TiO2 nanotube arrays which were synthesized by anodization of Ti foil and annealed at 450 °C. The most used methods for deposition of perovskite materials on mesoporous and planar TiO2 are: one-step deposition, two-step sequential deposition, and vapor-assisted solution processing. Disadvantage of these methods is a small contact area between TiO2 and perovskite. The aim of this research was to increase the contact surface of the perovskite and TiO2 nanotubes by filling the nanotubes with the perovskite material in order to improve electron transport. PB - Belgrade : Serbian Academy of Sciences and Arts C3 - Program & Book of Abstracts / Second International Conference ELMINA 2022, Belgrade, Serbia, August 22nd-26th, 2022 T1 - Improving the contact surface between TiO2 nanotubes and MAPbBr3 to make perovskite solar cells SP - 188 EP - 189 UR - https://hdl.handle.net/21.15107/rcub_dais_13636 ER -
@conference{ author = "Stefanović, Milica and Lukić, Ivana and Vujančević, Jelena and Petrović, Rada and Janaćković, Đorđe", year = "2022", abstract = "The organo-inorganic perovskites are extraordinary materials that have recently revolutionized the field of photovoltaics due to their low-cost fabrication and high optical absorption. In a short period, they reached great efficiency. Many parameters which affect the quality of perovskite films can be optimized, so the efficiency of these devices can be further improved. In perovskite solar cells, the perovskite layer is an active layer that absorbs the visible part of the spectrum, resulting in the formation of the electron-hole pair. To decrease the recombination of charge carriers, the construction of solar cells requires the existence of two additional layers in order to separate the holes and electrons. TiO2 could be used as an electron transport layer because its conduction band (CB) lies under the CB of perovskite. In that way, electrons diffuse from CB of perovskite to CB of TiO2. For these experiments, TiO2 nanotubular structure provides a one-dimensional transmission channel for the charge carriers, which resulting in faster carrier transport. Perovskite methylammonium lead bromide (MAPbBr3) was coupled with TiO2 nanotube arrays which were synthesized by anodization of Ti foil and annealed at 450 °C. The most used methods for deposition of perovskite materials on mesoporous and planar TiO2 are: one-step deposition, two-step sequential deposition, and vapor-assisted solution processing. Disadvantage of these methods is a small contact area between TiO2 and perovskite. The aim of this research was to increase the contact surface of the perovskite and TiO2 nanotubes by filling the nanotubes with the perovskite material in order to improve electron transport.", publisher = "Belgrade : Serbian Academy of Sciences and Arts", journal = "Program & Book of Abstracts / Second International Conference ELMINA 2022, Belgrade, Serbia, August 22nd-26th, 2022", title = "Improving the contact surface between TiO2 nanotubes and MAPbBr3 to make perovskite solar cells", pages = "188-189", url = "https://hdl.handle.net/21.15107/rcub_dais_13636" }
Stefanović, M., Lukić, I., Vujančević, J., Petrović, R.,& Janaćković, Đ.. (2022). Improving the contact surface between TiO2 nanotubes and MAPbBr3 to make perovskite solar cells. in Program & Book of Abstracts / Second International Conference ELMINA 2022, Belgrade, Serbia, August 22nd-26th, 2022 Belgrade : Serbian Academy of Sciences and Arts., 188-189. https://hdl.handle.net/21.15107/rcub_dais_13636
Stefanović M, Lukić I, Vujančević J, Petrović R, Janaćković Đ. Improving the contact surface between TiO2 nanotubes and MAPbBr3 to make perovskite solar cells. in Program & Book of Abstracts / Second International Conference ELMINA 2022, Belgrade, Serbia, August 22nd-26th, 2022. 2022;:188-189. https://hdl.handle.net/21.15107/rcub_dais_13636 .
Stefanović, Milica, Lukić, Ivana, Vujančević, Jelena, Petrović, Rada, Janaćković, Đorđe, "Improving the contact surface between TiO2 nanotubes and MAPbBr3 to make perovskite solar cells" in Program & Book of Abstracts / Second International Conference ELMINA 2022, Belgrade, Serbia, August 22nd-26th, 2022 (2022):188-189, https://hdl.handle.net/21.15107/rcub_dais_13636 .