Electrical properties of isothermally sintered cordierite-based ceramics as function of sintering and activation time
Električna svojstva izotermski sinterovane keramike na bazi kordierita kao funkcija vremena sinterovanja i aktivacije
Аутори
Đorđević, NatašaPeleš, Adriana
Obradović, Nina
Vlahović, Milica
Mihajlović, Slavica
Martinović, Sanja
Конференцијски прилог (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
The mechanical activation of the starting mixtures of cordierite (2MgO*2Al2O3*5SiO2) with 5.00 mass % TiO2 was performed in a high energy ball mill during 10-80 min. The applied compaction pressure before the sintering process was 2t/cm2. The sintering process was performed at 1350°C for 2h and 4h in air atmosphere. Scanning electron microscopy was performed to analyze the microstructure of both compacted and sintered samples. Atomic force microscope was used to investigate the surface of the sintered samples. This paper investigates the influence of prolonged sintering time on the densities of the sintered samples, along with electrical properties.
Mehanička aktivacija početnih smeša kordierita (2MgO*2Al2O3*5SiO2) sa 5.00 mas. % TiO2 izvršena je u visokoenergetskom mlinu sa kuglama tokom 10-80 min. Primenjeni pritisak presovanja pre procesa sinterovanja bio je 2 t/cm2. Proces sinterovanja je izveden na 1350 °C tokom 2h i 4h u vazdušnoj atmosferi. Skenirajuća elektronska mikroskopija je izvršena u cilju analize mikrostrukture presovanih i sinterovanih uzoraka. Za ispitivanje površine sinterovanih uzoraka korišćen je mikroskop atomskih sila. Ovaj rad istražuje uticaj produženog vremena sinterovanja na gustinu sinterovanih uzoraka zajedno sa električnim svojstvima.
Кључне речи:
mechanical activation / density / SEM / cordieriteИзвор:
Zbornik radova / 9. Međunarodna konferencija o obnovljivim izvorima električne energije, Beograd, 15. oktobar 2021 = Proceedings / 9th International Conference on Renewable Electrical Power Sources, Belgrade, October 15, 2021, 2021, 269-272Издавач:
- Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS
Финансирање / пројекти:
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200023 (Институт за технологију нуклеарних и других минералних сировина - ИТНМС, Београд) (RS-200023)
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200026 (Универзитет у Београду, Институт за хемију, технологију и металургију - ИХТМ) (RS-200026)
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200131 (Универзитет у Београду, Технички факултет у Бору) (RS-200131)
Институција/група
Институт техничких наука САНУ / Institute of Technical Sciences of SASATY - CONF AU - Đorđević, Nataša AU - Peleš, Adriana AU - Obradović, Nina AU - Vlahović, Milica AU - Mihajlović, Slavica AU - Martinović, Sanja PY - 2021 UR - https://dais.sanu.ac.rs/123456789/12355 AB - The mechanical activation of the starting mixtures of cordierite (2MgO*2Al2O3*5SiO2) with 5.00 mass % TiO2 was performed in a high energy ball mill during 10-80 min. The applied compaction pressure before the sintering process was 2t/cm2. The sintering process was performed at 1350°C for 2h and 4h in air atmosphere. Scanning electron microscopy was performed to analyze the microstructure of both compacted and sintered samples. Atomic force microscope was used to investigate the surface of the sintered samples. This paper investigates the influence of prolonged sintering time on the densities of the sintered samples, along with electrical properties. AB - Mehanička aktivacija početnih smeša kordierita (2MgO*2Al2O3*5SiO2) sa 5.00 mas. % TiO2 izvršena je u visokoenergetskom mlinu sa kuglama tokom 10-80 min. Primenjeni pritisak presovanja pre procesa sinterovanja bio je 2 t/cm2. Proces sinterovanja je izveden na 1350 °C tokom 2h i 4h u vazdušnoj atmosferi. Skenirajuća elektronska mikroskopija je izvršena u cilju analize mikrostrukture presovanih i sinterovanih uzoraka. Za ispitivanje površine sinterovanih uzoraka korišćen je mikroskop atomskih sila. Ovaj rad istražuje uticaj produženog vremena sinterovanja na gustinu sinterovanih uzoraka zajedno sa električnim svojstvima. PB - Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS C3 - Zbornik radova / 9. Međunarodna konferencija o obnovljivim izvorima električne energije, Beograd, 15. oktobar 2021 = Proceedings / 9th International Conference on Renewable Electrical Power Sources, Belgrade, October 15, 2021 T1 - Electrical properties of isothermally sintered cordierite-based ceramics as function of sintering and activation time T1 - Električna svojstva izotermski sinterovane keramike na bazi kordierita kao funkcija vremena sinterovanja i aktivacije SP - 269 EP - 272 UR - https://hdl.handle.net/21.15107/rcub_dais_12355 ER -
@conference{ author = "Đorđević, Nataša and Peleš, Adriana and Obradović, Nina and Vlahović, Milica and Mihajlović, Slavica and Martinović, Sanja", year = "2021", abstract = "The mechanical activation of the starting mixtures of cordierite (2MgO*2Al2O3*5SiO2) with 5.00 mass % TiO2 was performed in a high energy ball mill during 10-80 min. The applied compaction pressure before the sintering process was 2t/cm2. The sintering process was performed at 1350°C for 2h and 4h in air atmosphere. Scanning electron microscopy was performed to analyze the microstructure of both compacted and sintered samples. Atomic force microscope was used to investigate the surface of the sintered samples. This paper investigates the influence of prolonged sintering time on the densities of the sintered samples, along with electrical properties., Mehanička aktivacija početnih smeša kordierita (2MgO*2Al2O3*5SiO2) sa 5.00 mas. % TiO2 izvršena je u visokoenergetskom mlinu sa kuglama tokom 10-80 min. Primenjeni pritisak presovanja pre procesa sinterovanja bio je 2 t/cm2. Proces sinterovanja je izveden na 1350 °C tokom 2h i 4h u vazdušnoj atmosferi. Skenirajuća elektronska mikroskopija je izvršena u cilju analize mikrostrukture presovanih i sinterovanih uzoraka. Za ispitivanje površine sinterovanih uzoraka korišćen je mikroskop atomskih sila. Ovaj rad istražuje uticaj produženog vremena sinterovanja na gustinu sinterovanih uzoraka zajedno sa električnim svojstvima.", publisher = "Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS", journal = "Zbornik radova / 9. Međunarodna konferencija o obnovljivim izvorima električne energije, Beograd, 15. oktobar 2021 = Proceedings / 9th International Conference on Renewable Electrical Power Sources, Belgrade, October 15, 2021", title = "Electrical properties of isothermally sintered cordierite-based ceramics as function of sintering and activation time, Električna svojstva izotermski sinterovane keramike na bazi kordierita kao funkcija vremena sinterovanja i aktivacije", pages = "269-272", url = "https://hdl.handle.net/21.15107/rcub_dais_12355" }
Đorđević, N., Peleš, A., Obradović, N., Vlahović, M., Mihajlović, S.,& Martinović, S.. (2021). Electrical properties of isothermally sintered cordierite-based ceramics as function of sintering and activation time. in Zbornik radova / 9. Međunarodna konferencija o obnovljivim izvorima električne energije, Beograd, 15. oktobar 2021 = Proceedings / 9th International Conference on Renewable Electrical Power Sources, Belgrade, October 15, 2021 Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS., 269-272. https://hdl.handle.net/21.15107/rcub_dais_12355
Đorđević N, Peleš A, Obradović N, Vlahović M, Mihajlović S, Martinović S. Electrical properties of isothermally sintered cordierite-based ceramics as function of sintering and activation time. in Zbornik radova / 9. Međunarodna konferencija o obnovljivim izvorima električne energije, Beograd, 15. oktobar 2021 = Proceedings / 9th International Conference on Renewable Electrical Power Sources, Belgrade, October 15, 2021. 2021;:269-272. https://hdl.handle.net/21.15107/rcub_dais_12355 .
Đorđević, Nataša, Peleš, Adriana, Obradović, Nina, Vlahović, Milica, Mihajlović, Slavica, Martinović, Sanja, "Electrical properties of isothermally sintered cordierite-based ceramics as function of sintering and activation time" in Zbornik radova / 9. Međunarodna konferencija o obnovljivim izvorima električne energije, Beograd, 15. oktobar 2021 = Proceedings / 9th International Conference on Renewable Electrical Power Sources, Belgrade, October 15, 2021 (2021):269-272, https://hdl.handle.net/21.15107/rcub_dais_12355 .