Sort By
Publication Year
Deposit Date
Title
Type
Access
Publication Year
2021 (1)
2020 (9)
2019 (18)
2018 (13)
2017 (3)
2016 (1)
2015 (3)
2014 (3)
2013 (1)
2012 (1)

Vlahović, Branislav

Link to this page

Authority KeyName Variants
orcid::0000-0001-8965-1480
  • Vlahović, Branislav (53)
Projects
Directed synthesis, structure and properties of multifunctional materials United States National Aeronautics and Space Administration (NASA), Grant NNX09AV07A
United States National Science Foundation (NSF) / Centers of Research Excellence in Science and Technology (CREST), Grant HRD-0833184 United States National Science Foundation (NSF) / Partnerships for Research and Education in Materials (PREM), Grant 1523617
Size-, shape- and structure- dependent properties of nanoparticles and nanocomposites Zero- to Three-Dimensional Nanostructures for Application in Electronics and Renewable Energy Sources: Synthesis, Characterization and Processing
Lithium-ion batteries and fuel cells - research and development Materials of Reduced Dimensions for Efficient Light Harvesting and Energy conversion
National Science Foundation, North Carolina State University, Project No. HRD-1345219 Bilateral cooperation between Serbia and France, No. 4510339/2016/09/03 “Inteligent econanomaterials and nanocomposites”
Investigation of intermetallics and semiconductors and possible application in renewable energy sources Investigation of the effect of parameters of synthesis and processing on dielectric, optical and magnetic properties, both bulk and surface of crystal and polymeric systems
Geologic and ecotoxicologic research in identification of geopathogen zones of toxic elements in drinking water reservoirs- research into methods and procedures for reduction of biochemical anomalies Serbian Academy of Sciences and Arts, Project F-178
Serbian Academy of Sciences and Arts, Project F-198 Synthesis, processing and applications of nanostructured multifunctional materials with defined properties
Czech Science Foundation (GACR) - 17-05620S Serbian musical identities within local and global frameworks: traditions, changes, challenges
Functional, Functionalized and Advanced Nanomaterials Micro- Nanosystems and Sensors for Electric Power and Process Industry and Environmental Protection
Ministry of Education, Youth and Sports (MEYS) of Czech Republic - CEITEC 2020 [LQ1601] National Research Foundation in South Africa

Author's Bibliography

PVDF-HFP/NKBT composite dielectrics: Perovskite particles induce the appearance of an additional dielectric relaxation process in ferroelectric polymer matrix

Pavlović, Vera P.; Tošić, Dragana; Dojčilović, Radovan; Dudić, Duško; Dramićanin, Miroslav D.; Medić, Mina; McPherson, Michael M.; Pavlović, Vladimir B.; Vlahović, Branislav; Đoković, Vladimir

(Elsevier BV, 2021)

TY  - JOUR
AU  - Pavlović, Vera P.
AU  - Tošić, Dragana
AU  - Dojčilović, Radovan
AU  - Dudić, Duško
AU  - Dramićanin, Miroslav D.
AU  - Medić, Mina
AU  - McPherson, Michael M.
AU  - Pavlović, Vladimir B.
AU  - Vlahović, Branislav
AU  - Đoković, Vladimir
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/10535
AB  - Na0.25K0.25Bi0.5TiO3 (NKBT) perovskite particles are synthesized by solid-state method and used as a filler for polyvinylidene fluoride-co-hexafluoropropylene (PVDF-HFP) co-polymer. X-ray diffraction analysis of NKBT powders shows that the particles have a rhombohedral perovskite crystal structure (R3c symmetry). Raman spectroscopy reveals that the co-polymer crystallizes predominantly into the mixture of polar β- and γ-crystals, while there is also a contribution of the non-polar α-crystal phase. The introduction of the NKBT into the PVDF-HFP results with an increase in effective dielectric permittivity and this effect depends on the inorganic content in the composite. The most interesting result of the present study is that the introduction of NKBT particles induces the appearance of an additional transition peak in the dielectric spectra of the co-polymer matrix. At the fixed frequency of ~2 kHz, the observed process appears at ~10 °C (about 45° above the glass transition temperature) and its magnitude strongly depends on the amount of the NKBT in the composite. Dielectric spectroscopy measurements of the composites are carried out in the wide range of frequencies (from 0.1 Hz to 1 MHz) and temperatures (from −100 to 100 °C). They reveal that the novel process can be clearly distinguished in the frequency range between 160 Hz and ~50 kHz.
PB  - Elsevier BV
T2  - Polymer Testing
T1  - PVDF-HFP/NKBT composite dielectrics: Perovskite particles induce the appearance of an additional dielectric relaxation process in ferroelectric polymer matrix
SP  - 107093
VL  - 96
DO  - 10.1016/j.polymertesting.2021.107093
ER  - 
@article{
author = "Pavlović, Vera P. and Tošić, Dragana and Dojčilović, Radovan and Dudić, Duško and Dramićanin, Miroslav D. and Medić, Mina and McPherson, Michael M. and Pavlović, Vladimir B. and Vlahović, Branislav and Đoković, Vladimir",
year = "2021",
url = "https://dais.sanu.ac.rs/123456789/10535",
abstract = "Na0.25K0.25Bi0.5TiO3 (NKBT) perovskite particles are synthesized by solid-state method and used as a filler for polyvinylidene fluoride-co-hexafluoropropylene (PVDF-HFP) co-polymer. X-ray diffraction analysis of NKBT powders shows that the particles have a rhombohedral perovskite crystal structure (R3c symmetry). Raman spectroscopy reveals that the co-polymer crystallizes predominantly into the mixture of polar β- and γ-crystals, while there is also a contribution of the non-polar α-crystal phase. The introduction of the NKBT into the PVDF-HFP results with an increase in effective dielectric permittivity and this effect depends on the inorganic content in the composite. The most interesting result of the present study is that the introduction of NKBT particles induces the appearance of an additional transition peak in the dielectric spectra of the co-polymer matrix. At the fixed frequency of ~2 kHz, the observed process appears at ~10 °C (about 45° above the glass transition temperature) and its magnitude strongly depends on the amount of the NKBT in the composite. Dielectric spectroscopy measurements of the composites are carried out in the wide range of frequencies (from 0.1 Hz to 1 MHz) and temperatures (from −100 to 100 °C). They reveal that the novel process can be clearly distinguished in the frequency range between 160 Hz and ~50 kHz.",
publisher = "Elsevier BV",
journal = "Polymer Testing",
title = "PVDF-HFP/NKBT composite dielectrics: Perovskite particles induce the appearance of an additional dielectric relaxation process in ferroelectric polymer matrix",
pages = "107093",
volume = "96",
doi = "10.1016/j.polymertesting.2021.107093"
}
Pavlović, V. P., Tošić, D., Dojčilović, R., Dudić, D., Dramićanin, M. D., Medić, M., McPherson, M. M., Pavlović, V. B., Vlahović, B.,& Đoković, V. (2021). PVDF-HFP/NKBT composite dielectrics: Perovskite particles induce the appearance of an additional dielectric relaxation process in ferroelectric polymer matrix.
Polymer TestingElsevier BV., 96, 107093. 
https://doi.org/10.1016/j.polymertesting.2021.107093
Pavlović VP, Tošić D, Dojčilović R, Dudić D, Dramićanin MD, Medić M, McPherson MM, Pavlović VB, Vlahović B, Đoković V. PVDF-HFP/NKBT composite dielectrics: Perovskite particles induce the appearance of an additional dielectric relaxation process in ferroelectric polymer matrix. Polymer Testing. 2021;96:107093

The fractal nature as new frontier in microstructural characterization and relativization of scale sizes within space

Mitić, Vojislav V.; Lazović, Goran; Mirjanić, Dragoljub; Fecht, Hans; Vlahović, Branislav; Arnold, Walter

(World Scientific, 2020)

TY  - JOUR
AU  - Mitić, Vojislav V.
AU  - Lazović, Goran
AU  - Mirjanić, Dragoljub
AU  - Fecht, Hans
AU  - Vlahović, Branislav
AU  - Arnold, Walter
PY  - 2020
UR  - https://www.worldscientific.com/doi/abs/10.1142/S0217984920504217
UR  - https://dais.sanu.ac.rs/123456789/9819
AB  - Today in the age of advanced ceramic civilization, there are a variety of applications for modern ceramics materials with specific properties. Our up-to date research recognizes that ceramics have a fractal configuration nature on the basis of different phenomena. The key property of fractals is their scale-independence. The practical value is that the fractal objects’ interaction and energy is possible at any reasonable scale of magnitude, including the nanoscale and may be even below. This is a consequence of fractal scale independence. This brings us to the conclusion that properties of fractals are valid on any scale (macro, micro, or nano). We also analyzed these questions with experimental results obtained from a comet, here 67P, and also from ceramic grain and pore morphologies on the microstructure level. Fractality, as a scale-independent morphology, provides significant variety of opportunities, for example for energy storage. From the viewpoint of scaling, the relation between large and small in fractal analysis is very important. An ideal fractal can be magnified endlessly but natural morphologies cannot, what is the new light in materials sciences and space.
PB  - World Scientific
T2  - Modern Physics Letters B
T1  - The fractal nature as new frontier in microstructural characterization and relativization of scale sizes within space
SP  - 2050421
VL  - 34
IS  - 22
DO  - 10.1142/S0217984920504217
ER  - 
@article{
author = "Mitić, Vojislav V. and Lazović, Goran and Mirjanić, Dragoljub and Fecht, Hans and Vlahović, Branislav and Arnold, Walter",
year = "2020",
url = "https://www.worldscientific.com/doi/abs/10.1142/S0217984920504217, https://dais.sanu.ac.rs/123456789/9819",
abstract = "Today in the age of advanced ceramic civilization, there are a variety of applications for modern ceramics materials with specific properties. Our up-to date research recognizes that ceramics have a fractal configuration nature on the basis of different phenomena. The key property of fractals is their scale-independence. The practical value is that the fractal objects’ interaction and energy is possible at any reasonable scale of magnitude, including the nanoscale and may be even below. This is a consequence of fractal scale independence. This brings us to the conclusion that properties of fractals are valid on any scale (macro, micro, or nano). We also analyzed these questions with experimental results obtained from a comet, here 67P, and also from ceramic grain and pore morphologies on the microstructure level. Fractality, as a scale-independent morphology, provides significant variety of opportunities, for example for energy storage. From the viewpoint of scaling, the relation between large and small in fractal analysis is very important. An ideal fractal can be magnified endlessly but natural morphologies cannot, what is the new light in materials sciences and space.",
publisher = "World Scientific",
journal = "Modern Physics Letters B",
title = "The fractal nature as new frontier in microstructural characterization and relativization of scale sizes within space",
pages = "2050421",
volume = "34",
number = "22",
doi = "10.1142/S0217984920504217"
}
Mitić, V. V., Lazović, G., Mirjanić, D., Fecht, H., Vlahović, B.,& Arnold, W. (2020). The fractal nature as new frontier in microstructural characterization and relativization of scale sizes within space.
Modern Physics Letters BWorld Scientific., 34(22), 2050421. 
https://doi.org/10.1142/S0217984920504217
Mitić VV, Lazović G, Mirjanić D, Fecht H, Vlahović B, Arnold W. The fractal nature as new frontier in microstructural characterization and relativization of scale sizes within space. Modern Physics Letters B. 2020;34(22):2050421

Ceramics, materials, microelectronics and graph theory new frontiers

Ranđelović, Branislav M.; Mitić, Vojislav V.; Ribar, Srđan; Lu, Chun-An; Radović, Ivana; Stajčić, Aleksandar; Novaković, Igor; Vlahović, Branislav

(World Scientific Pub Co Pte Lt, 2020)

TY  - JOUR
AU  - Ranđelović, Branislav M.
AU  - Mitić, Vojislav V.
AU  - Ribar, Srđan
AU  - Lu, Chun-An
AU  - Radović, Ivana
AU  - Stajčić, Aleksandar
AU  - Novaković, Igor
AU  - Vlahović, Branislav
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/10031
UR  - https://dais.sanu.ac.rs/123456789/10032
AB  - This research is focused on further developing of application and use of graph theory in order to describe relations between grains and to establish control over layers. We used functionalized BaTiO3 nanoparticles coated with Yttrium-based salt. The capacitance change results on super-microstructure levels are the part of the measured values on the bulk samples. The new idea is graph theory application for determination of electronic parameters distribution at the grain boundary and to compare them with the bulk measured values. We present them with vertices in graph, corresponding with grains, connected with edges. Capacitance change with applied voltage was measured on samples sintered in air and nitrogen, up to 100 V. Using graph theory, it has been shown that capacitance change can be successfully calculated on the layers between grains. Within the idea how to get parameters values at microlevel between the grains and pores, mathematical tool can be developed. Besides previously described 1D case, some original calculations for 2D cases were performed in this study, proving successful graph theory use for the calculation of values at nanolevel, leading to a further minituarization in micropackaging.
PB  - World Scientific Pub Co Pte Lt
T2  - Modern Physics Letters B
T1  - Ceramics, materials, microelectronics and graph theory new frontiers
SP  - 2150159
VL  - 34
DO  - 10.1142/S0217984921501591
ER  - 
@article{
author = "Ranđelović, Branislav M. and Mitić, Vojislav V. and Ribar, Srđan and Lu, Chun-An and Radović, Ivana and Stajčić, Aleksandar and Novaković, Igor and Vlahović, Branislav",
year = "2020",
url = "https://dais.sanu.ac.rs/123456789/10031, https://dais.sanu.ac.rs/123456789/10032",
abstract = "This research is focused on further developing of application and use of graph theory in order to describe relations between grains and to establish control over layers. We used functionalized BaTiO3 nanoparticles coated with Yttrium-based salt. The capacitance change results on super-microstructure levels are the part of the measured values on the bulk samples. The new idea is graph theory application for determination of electronic parameters distribution at the grain boundary and to compare them with the bulk measured values. We present them with vertices in graph, corresponding with grains, connected with edges. Capacitance change with applied voltage was measured on samples sintered in air and nitrogen, up to 100 V. Using graph theory, it has been shown that capacitance change can be successfully calculated on the layers between grains. Within the idea how to get parameters values at microlevel between the grains and pores, mathematical tool can be developed. Besides previously described 1D case, some original calculations for 2D cases were performed in this study, proving successful graph theory use for the calculation of values at nanolevel, leading to a further minituarization in micropackaging.",
publisher = "World Scientific Pub Co Pte Lt",
journal = "Modern Physics Letters B",
title = "Ceramics, materials, microelectronics and graph theory new frontiers",
pages = "2150159",
volume = "34",
doi = "10.1142/S0217984921501591"
}
Ranđelović, B. M., Mitić, V. V., Ribar, S., Lu, C., Radović, I., Stajčić, A., Novaković, I.,& Vlahović, B. (2020). Ceramics, materials, microelectronics and graph theory new frontiers.
Modern Physics Letters BWorld Scientific Pub Co Pte Lt., 34, 2150159. 
https://doi.org/10.1142/S0217984921501591
Ranđelović BM, Mitić VV, Ribar S, Lu C, Radović I, Stajčić A, Novaković I, Vlahović B. Ceramics, materials, microelectronics and graph theory new frontiers. Modern Physics Letters B. 2020;34:2150159

Ceramics, materials, microelectronics and graph theory new frontiers

Ranđelović, Branislav M.; Mitić, Vojislav V.; Ribar, Srđan; Lu, Chun-An; Radović, Ivana; Stajčić, Aleksandar; Novaković, Igor; Vlahović, Branislav

(World Scientific Pub Co Pte Lt, 2020)

TY  - JOUR
AU  - Ranđelović, Branislav M.
AU  - Mitić, Vojislav V.
AU  - Ribar, Srđan
AU  - Lu, Chun-An
AU  - Radović, Ivana
AU  - Stajčić, Aleksandar
AU  - Novaković, Igor
AU  - Vlahović, Branislav
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/10031
AB  - This research is focused on further developing of application and use of graph theory in order to describe relations between grains and to establish control over layers. We used functionalized BaTiO3 nanoparticles coated with Yttrium-based salt. The capacitance change results on super-microstructure levels are the part of the measured values on the bulk samples. The new idea is graph theory application for determination of electronic parameters distribution at the grain boundary and to compare them with the bulk measured values. We present them with vertices in graph, corresponding with grains, connected with edges. Capacitance change with applied voltage was measured on samples sintered in air and nitrogen, up to 100 V. Using graph theory, it has been shown that capacitance change can be successfully calculated on the layers between grains. Within the idea how to get parameters values at microlevel between the grains and pores, mathematical tool can be developed. Besides previously described 1D case, some original calculations for 2D cases were performed in this study, proving successful graph theory use for the calculation of values at nanolevel, leading to a further minituarization in micropackaging.
PB  - World Scientific Pub Co Pte Lt
T2  - Modern Physics Letters B
T1  - Ceramics, materials, microelectronics and graph theory new frontiers
SP  - 2150159
VL  - 34
DO  - 10.1142/S0217984921501591
ER  - 
@article{
author = "Ranđelović, Branislav M. and Mitić, Vojislav V. and Ribar, Srđan and Lu, Chun-An and Radović, Ivana and Stajčić, Aleksandar and Novaković, Igor and Vlahović, Branislav",
year = "2020",
url = "https://dais.sanu.ac.rs/123456789/10031",
abstract = "This research is focused on further developing of application and use of graph theory in order to describe relations between grains and to establish control over layers. We used functionalized BaTiO3 nanoparticles coated with Yttrium-based salt. The capacitance change results on super-microstructure levels are the part of the measured values on the bulk samples. The new idea is graph theory application for determination of electronic parameters distribution at the grain boundary and to compare them with the bulk measured values. We present them with vertices in graph, corresponding with grains, connected with edges. Capacitance change with applied voltage was measured on samples sintered in air and nitrogen, up to 100 V. Using graph theory, it has been shown that capacitance change can be successfully calculated on the layers between grains. Within the idea how to get parameters values at microlevel between the grains and pores, mathematical tool can be developed. Besides previously described 1D case, some original calculations for 2D cases were performed in this study, proving successful graph theory use for the calculation of values at nanolevel, leading to a further minituarization in micropackaging.",
publisher = "World Scientific Pub Co Pte Lt",
journal = "Modern Physics Letters B",
title = "Ceramics, materials, microelectronics and graph theory new frontiers",
pages = "2150159",
volume = "34",
doi = "10.1142/S0217984921501591"
}
Ranđelović, B. M., Mitić, V. V., Ribar, S., Lu, C., Radović, I., Stajčić, A., Novaković, I.,& Vlahović, B. (2020). Ceramics, materials, microelectronics and graph theory new frontiers.
Modern Physics Letters BWorld Scientific Pub Co Pte Lt., 34, 2150159. 
https://doi.org/10.1142/S0217984921501591
Ranđelović BM, Mitić VV, Ribar S, Lu C, Radović I, Stajčić A, Novaković I, Vlahović B. Ceramics, materials, microelectronics and graph theory new frontiers. Modern Physics Letters B. 2020;34:2150159

The fractal nature as new frontier in microstructural characterization and relativization of scale sizes within space

Mitić, Vojislav V.; Lazović, Goran; Mirjanić, Dragoljub; Fecht, Hans; Vlahović, Branislav; Arnold, Walter

(World Scientific, 2020)

TY  - JOUR
AU  - Mitić, Vojislav V.
AU  - Lazović, Goran
AU  - Mirjanić, Dragoljub
AU  - Fecht, Hans
AU  - Vlahović, Branislav
AU  - Arnold, Walter
PY  - 2020
UR  - https://www.worldscientific.com/doi/abs/10.1142/S0217984920504217
UR  - https://dais.sanu.ac.rs/123456789/9820
AB  - Today in the age of advanced ceramic civilization, there are a variety of applications for modern ceramics materials with specific properties. Our up-to date research recognizes that ceramics have a fractal configuration nature on the basis of different phenomena. The key property of fractals is their scale-independence. The practical value is that the fractal objects’ interaction and energy is possible at any reasonable scale of magnitude, including the nanoscale and may be even below. This is a consequence of fractal scale independence. This brings us to the conclusion that properties of fractals are valid on any scale (macro, micro, or nano). We also analyzed these questions with experimental results obtained from a comet, here 67P, and also from ceramic grain and pore morphologies on the microstructure level. Fractality, as a scale-independent morphology, provides significant variety of opportunities, for example for energy storage. From the viewpoint of scaling, the relation between large and small in fractal analysis is very important. An ideal fractal can be magnified endlessly but natural morphologies cannot, what is the new light in materials sciences and space.
PB  - World Scientific
T2  - Modern Physics Letters B
T1  - The fractal nature as new frontier in microstructural characterization and relativization of scale sizes within space
SP  - 2050421
VL  - 34
IS  - 22
DO  - 10.1142/S0217984920504217
ER  - 
@article{
author = "Mitić, Vojislav V. and Lazović, Goran and Mirjanić, Dragoljub and Fecht, Hans and Vlahović, Branislav and Arnold, Walter",
year = "2020",
url = "https://www.worldscientific.com/doi/abs/10.1142/S0217984920504217, https://dais.sanu.ac.rs/123456789/9820",
abstract = "Today in the age of advanced ceramic civilization, there are a variety of applications for modern ceramics materials with specific properties. Our up-to date research recognizes that ceramics have a fractal configuration nature on the basis of different phenomena. The key property of fractals is their scale-independence. The practical value is that the fractal objects’ interaction and energy is possible at any reasonable scale of magnitude, including the nanoscale and may be even below. This is a consequence of fractal scale independence. This brings us to the conclusion that properties of fractals are valid on any scale (macro, micro, or nano). We also analyzed these questions with experimental results obtained from a comet, here 67P, and also from ceramic grain and pore morphologies on the microstructure level. Fractality, as a scale-independent morphology, provides significant variety of opportunities, for example for energy storage. From the viewpoint of scaling, the relation between large and small in fractal analysis is very important. An ideal fractal can be magnified endlessly but natural morphologies cannot, what is the new light in materials sciences and space.",
publisher = "World Scientific",
journal = "Modern Physics Letters B",
title = "The fractal nature as new frontier in microstructural characterization and relativization of scale sizes within space",
pages = "2050421",
volume = "34",
number = "22",
doi = "10.1142/S0217984920504217"
}
Mitić, V. V., Lazović, G., Mirjanić, D., Fecht, H., Vlahović, B.,& Arnold, W. (2020). The fractal nature as new frontier in microstructural characterization and relativization of scale sizes within space.
Modern Physics Letters BWorld Scientific., 34(22), 2050421. 
https://doi.org/10.1142/S0217984920504217
Mitić VV, Lazović G, Mirjanić D, Fecht H, Vlahović B, Arnold W. The fractal nature as new frontier in microstructural characterization and relativization of scale sizes within space. Modern Physics Letters B. 2020;34(22):2050421

Brownian motion and fractal nature

Mitić, Vojislav V.; Lazović, Goran; Milošević, Dušan; Lu, Chun-An; Manojlović, Jelena; Tsay, Shwu-Chen; Kruchinin, Sergey; Vlahović, Branislav

(World Scientific Pub Co Pte Lt, 2020)

TY  - JOUR
AU  - Mitić, Vojislav V.
AU  - Lazović, Goran
AU  - Milošević, Dušan
AU  - Lu, Chun-An
AU  - Manojlović, Jelena
AU  - Tsay, Shwu-Chen
AU  - Kruchinin, Sergey
AU  - Vlahović, Branislav
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/10024
AB  - The main goal of our research is to find the connection between micro particles and microorganisms motion in the Nature, considered as Brownian’s Motion within the fractal’s nature. For ceramics and generally material science it is important to clarify the particles motion and other phenomena, especially for grains and pores. Our idea is to establish control over the relation order–disorder on particle motion and their collision effects by Brownian motion phenomena in the frame of fractal nature matter. We performed some experiments and got interesting results based on microorganism motion initiated by different outer energetic impulses. This is practically the idea of biomimetic correlation between particles and microorganisms Worlds, what is very original and leads towards biunivocal different phenomena’s understanding. Another idea is to establish some controlling effects for electro ceramic particle motion in chemical-materials sciences consolidation by some phenomena in the nature. These important research directions open new frontiers with very specific reflections for future of microelectronics materials.
PB  - World Scientific Pub Co Pte Lt
T2  - Modern Physics Letters B
T1  - Brownian motion and fractal nature
SP  - 2040061
VL  - 34
IS  - 19n20
DO  - 10.1142/S0217984920400618
ER  - 
@article{
author = "Mitić, Vojislav V. and Lazović, Goran and Milošević, Dušan and Lu, Chun-An and Manojlović, Jelena and Tsay, Shwu-Chen and Kruchinin, Sergey and Vlahović, Branislav",
year = "2020",
url = "https://dais.sanu.ac.rs/123456789/10024",
abstract = "The main goal of our research is to find the connection between micro particles and microorganisms motion in the Nature, considered as Brownian’s Motion within the fractal’s nature. For ceramics and generally material science it is important to clarify the particles motion and other phenomena, especially for grains and pores. Our idea is to establish control over the relation order–disorder on particle motion and their collision effects by Brownian motion phenomena in the frame of fractal nature matter. We performed some experiments and got interesting results based on microorganism motion initiated by different outer energetic impulses. This is practically the idea of biomimetic correlation between particles and microorganisms Worlds, what is very original and leads towards biunivocal different phenomena’s understanding. Another idea is to establish some controlling effects for electro ceramic particle motion in chemical-materials sciences consolidation by some phenomena in the nature. These important research directions open new frontiers with very specific reflections for future of microelectronics materials.",
publisher = "World Scientific Pub Co Pte Lt",
journal = "Modern Physics Letters B",
title = "Brownian motion and fractal nature",
pages = "2040061",
volume = "34",
number = "19n20",
doi = "10.1142/S0217984920400618"
}
Mitić, V. V., Lazović, G., Milošević, D., Lu, C., Manojlović, J., Tsay, S., Kruchinin, S.,& Vlahović, B. (2020). Brownian motion and fractal nature.
Modern Physics Letters BWorld Scientific Pub Co Pte Lt., 34(19n20), 2040061. 
https://doi.org/10.1142/S0217984920400618
Mitić VV, Lazović G, Milošević D, Lu C, Manojlović J, Tsay S, Kruchinin S, Vlahović B. Brownian motion and fractal nature. Modern Physics Letters B. 2020;34(19n20):2040061
1
1

Brownian motion and fractal nature

Mitić, Vojislav V.; Lazović, Goran; Milošević, Dušan; Lu, Chun-An; Manojlović, Jelena; Tsay, Shwu-Chen; Kruchinin, Sergey; Vlahović, Branislav

(World Scientific Pub Co Pte Lt, 2020)

TY  - JOUR
AU  - Mitić, Vojislav V.
AU  - Lazović, Goran
AU  - Milošević, Dušan
AU  - Lu, Chun-An
AU  - Manojlović, Jelena
AU  - Tsay, Shwu-Chen
AU  - Kruchinin, Sergey
AU  - Vlahović, Branislav
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/10024
UR  - https://dais.sanu.ac.rs/123456789/10025
AB  - The main goal of our research is to find the connection between micro particles and microorganisms motion in the Nature, considered as Brownian’s Motion within the fractal’s nature. For ceramics and generally material science it is important to clarify the particles motion and other phenomena, especially for grains and pores. Our idea is to establish control over the relation order–disorder on particle motion and their collision effects by Brownian motion phenomena in the frame of fractal nature matter. We performed some experiments and got interesting results based on microorganism motion initiated by different outer energetic impulses. This is practically the idea of biomimetic correlation between particles and microorganisms Worlds, what is very original and leads towards biunivocal different phenomena’s understanding. Another idea is to establish some controlling effects for electro ceramic particle motion in chemical-materials sciences consolidation by some phenomena in the nature. These important research directions open new frontiers with very specific reflections for future of microelectronics materials.
PB  - World Scientific Pub Co Pte Lt
T2  - Modern Physics Letters B
T1  - Brownian motion and fractal nature
SP  - 2040061
VL  - 34
IS  - 19n20
DO  - 10.1142/S0217984920400618
ER  - 
@article{
author = "Mitić, Vojislav V. and Lazović, Goran and Milošević, Dušan and Lu, Chun-An and Manojlović, Jelena and Tsay, Shwu-Chen and Kruchinin, Sergey and Vlahović, Branislav",
year = "2020",
url = "https://dais.sanu.ac.rs/123456789/10024, https://dais.sanu.ac.rs/123456789/10025",
abstract = "The main goal of our research is to find the connection between micro particles and microorganisms motion in the Nature, considered as Brownian’s Motion within the fractal’s nature. For ceramics and generally material science it is important to clarify the particles motion and other phenomena, especially for grains and pores. Our idea is to establish control over the relation order–disorder on particle motion and their collision effects by Brownian motion phenomena in the frame of fractal nature matter. We performed some experiments and got interesting results based on microorganism motion initiated by different outer energetic impulses. This is practically the idea of biomimetic correlation between particles and microorganisms Worlds, what is very original and leads towards biunivocal different phenomena’s understanding. Another idea is to establish some controlling effects for electro ceramic particle motion in chemical-materials sciences consolidation by some phenomena in the nature. These important research directions open new frontiers with very specific reflections for future of microelectronics materials.",
publisher = "World Scientific Pub Co Pte Lt",
journal = "Modern Physics Letters B",
title = "Brownian motion and fractal nature",
pages = "2040061",
volume = "34",
number = "19n20",
doi = "10.1142/S0217984920400618"
}
Mitić, V. V., Lazović, G., Milošević, D., Lu, C., Manojlović, J., Tsay, S., Kruchinin, S.,& Vlahović, B. (2020). Brownian motion and fractal nature.
Modern Physics Letters BWorld Scientific Pub Co Pte Lt., 34(19n20), 2040061. 
https://doi.org/10.1142/S0217984920400618
Mitić VV, Lazović G, Milošević D, Lu C, Manojlović J, Tsay S, Kruchinin S, Vlahović B. Brownian motion and fractal nature. Modern Physics Letters B. 2020;34(19n20):2040061
1
1

The Artificial Neural Networks Applied for Microelectronics Intergranular Relations Determination

Mitić, Vojislav V.; Lazović, Goran; Ribar, Srđan; Lu, Chun-An; Radović, Ivana; Stajčić, Aleksandar; Fecht, Hans; Vlahović, Branislav

(Taylor & Francis, 2020)

TY  - JOUR
AU  - Mitić, Vojislav V.
AU  - Lazović, Goran
AU  - Ribar, Srđan
AU  - Lu, Chun-An
AU  - Radović, Ivana
AU  - Stajčić, Aleksandar
AU  - Fecht, Hans
AU  - Vlahović, Branislav
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/9542
AB  - This paper is based on fundamental research to develop the interface structure around the grains and to control the layers between two grains, as a prospective media for high-level electronic parameters integrations. We performed the experiments based on nano-BaTiO3 powders with Y additives. All results on dielectric parameters on submicron level are the part of global values the same measured characteristics at the bulk samples. The original idea is to develop the new computing ways to network electronic parameters in thin layers between the grains on the way to get and to compare the values on the samples. Artificial neural networks are computing tools that map input-output data and could be applied on ceramic electronic parameters. These are developed in the manner signals are processed in biological neural networks. The signals are processed by using elements which represent artificial neurons, which have a simple function to process input signal, as well as adjustable parameter which has an influence to change output signal. The total network output presents the sum of a large number neurons outputs. This important research idea is to connect analysis results and neural networks. There is a great interest to connect all of these microcapacitances by neural network with the goal to compare the results in the standard bulk samples measurements frame and microelectronics parameters. The final result of the study was functional relation definition between consolidation parameters, voltage (U) and relative capacitance change, from the level of the bulk sample down to the grains boundaries.
PB  - Taylor & Francis
T2  - Integrated Ferroelectrics
T1  - The Artificial Neural Networks Applied for Microelectronics Intergranular Relations Determination
SP  - 135
EP  - 146
VL  - 212
IS  - 1
DO  - 10.1080/10584587.2020.1819042
ER  - 
@article{
author = "Mitić, Vojislav V. and Lazović, Goran and Ribar, Srđan and Lu, Chun-An and Radović, Ivana and Stajčić, Aleksandar and Fecht, Hans and Vlahović, Branislav",
year = "2020",
url = "https://dais.sanu.ac.rs/123456789/9542",
abstract = "This paper is based on fundamental research to develop the interface structure around the grains and to control the layers between two grains, as a prospective media for high-level electronic parameters integrations. We performed the experiments based on nano-BaTiO3 powders with Y additives. All results on dielectric parameters on submicron level are the part of global values the same measured characteristics at the bulk samples. The original idea is to develop the new computing ways to network electronic parameters in thin layers between the grains on the way to get and to compare the values on the samples. Artificial neural networks are computing tools that map input-output data and could be applied on ceramic electronic parameters. These are developed in the manner signals are processed in biological neural networks. The signals are processed by using elements which represent artificial neurons, which have a simple function to process input signal, as well as adjustable parameter which has an influence to change output signal. The total network output presents the sum of a large number neurons outputs. This important research idea is to connect analysis results and neural networks. There is a great interest to connect all of these microcapacitances by neural network with the goal to compare the results in the standard bulk samples measurements frame and microelectronics parameters. The final result of the study was functional relation definition between consolidation parameters, voltage (U) and relative capacitance change, from the level of the bulk sample down to the grains boundaries.",
publisher = "Taylor & Francis",
journal = "Integrated Ferroelectrics",
title = "The Artificial Neural Networks Applied for Microelectronics Intergranular Relations Determination",
pages = "135-146",
volume = "212",
number = "1",
doi = "10.1080/10584587.2020.1819042"
}
Mitić, V. V., Lazović, G., Ribar, S., Lu, C., Radović, I., Stajčić, A., Fecht, H.,& Vlahović, B. (2020). The Artificial Neural Networks Applied for Microelectronics Intergranular Relations Determination.
Integrated FerroelectricsTaylor & Francis., 212(1), 135-146. 
https://doi.org/10.1080/10584587.2020.1819042
Mitić VV, Lazović G, Ribar S, Lu C, Radović I, Stajčić A, Fecht H, Vlahović B. The Artificial Neural Networks Applied for Microelectronics Intergranular Relations Determination. Integrated Ferroelectrics. 2020;212(1):135-146

Entropy and fractal nature

Mitić, Vojislav V.; Lazović, Goran M.; Manojlović, Jelena Ž; Huang, Wen-Chieh; Stojiljković, Mladen M.; Facht, Hans; Vlahović, Branislav

(Belgrade : Vinča Institute of Nuclear Sciences, 2020)

TY  - JOUR
AU  - Mitić, Vojislav V.
AU  - Lazović, Goran M.
AU  - Manojlović, Jelena Ž
AU  - Huang, Wen-Chieh
AU  - Stojiljković, Mladen M.
AU  - Facht, Hans
AU  - Vlahović, Branislav
PY  - 2020
UR  - http://dais.sanu.ac.rs/123456789/8962
AB  - Existing, the biunivocal correspondents between the fractal nature and the nature discovered by fractals is the source and meeting point from those two aspects which are similar to the thermodynamically philosophical point of view. Sometimes we can begin from the end. We are substantial part of such fractals space nature. The mathematics fractal structures world have been inspired from nature and Euclidian geometry imagined shapes, and now it is coming back to nature serving it. All our analysis are based on several experimental results. The substance of the question regarding entropy and fractals could be analyzed on different ceramics and materials in general. We have reported the results based on consolidation BaTiO3- ceramics by the standard sintering technology, performed with BaTiO3 and different additives (MnCO3, CeO2, Bi2O3, Fe2O3, CaZrO3, Nb2O5, Er2O3, Yt2O3, Ho2O3). Thermodynamic principles are very important. Beside the energy and temperature, the entropy as a measure between the order and disorder (chaos) is very important parameter. In this paper, we establish the relation between the entropy and fractal that opens new frontiers with the goal to understand and establish the order-disorder relation.
PB  - Belgrade : Vinča Institute of Nuclear Sciences
T2  - Thermal Science
T1  - Entropy and fractal nature
SP  - 2203
EP  - 2212
VL  - 24
IS  - 3 Part B
DO  - 10.2298/TSCI191007451M
ER  - 
@article{
author = "Mitić, Vojislav V. and Lazović, Goran M. and Manojlović, Jelena Ž and Huang, Wen-Chieh and Stojiljković, Mladen M. and Facht, Hans and Vlahović, Branislav",
year = "2020",
url = "http://dais.sanu.ac.rs/123456789/8962",
abstract = "Existing, the biunivocal correspondents between the fractal nature and the nature discovered by fractals is the source and meeting point from those two aspects which are similar to the thermodynamically philosophical point of view. Sometimes we can begin from the end. We are substantial part of such fractals space nature. The mathematics fractal structures world have been inspired from nature and Euclidian geometry imagined shapes, and now it is coming back to nature serving it. All our analysis are based on several experimental results. The substance of the question regarding entropy and fractals could be analyzed on different ceramics and materials in general. We have reported the results based on consolidation BaTiO3- ceramics by the standard sintering technology, performed with BaTiO3 and different additives (MnCO3, CeO2, Bi2O3, Fe2O3, CaZrO3, Nb2O5, Er2O3, Yt2O3, Ho2O3). Thermodynamic principles are very important. Beside the energy and temperature, the entropy as a measure between the order and disorder (chaos) is very important parameter. In this paper, we establish the relation between the entropy and fractal that opens new frontiers with the goal to understand and establish the order-disorder relation.",
publisher = "Belgrade : Vinča Institute of Nuclear Sciences",
journal = "Thermal Science",
title = "Entropy and fractal nature",
pages = "2203-2212",
volume = "24",
number = "3 Part B",
doi = "10.2298/TSCI191007451M"
}
Mitić, V. V., Lazović, G. M., Manojlović, J. Ž., Huang, W., Stojiljković, M. M., Facht, H.,& Vlahović, B. (2020). Entropy and fractal nature.
Thermal ScienceBelgrade : Vinča Institute of Nuclear Sciences., 24(3 Part B), 2203-2212. 
https://doi.org/10.2298/TSCI191007451M
Mitić VV, Lazović GM, Manojlović JŽ, Huang W, Stojiljković MM, Facht H, Vlahović B. Entropy and fractal nature. Thermal Science. 2020;24(3 Part B):2203-2212

The Nano-Scale Modified BaTiO3 Morphology Influence on Electronic Properties and Ceramics Fractal Nature Frontiers

Mitić, Vojislav V.; Lazović, Goran; Lu, Chun-An; Paunović, Vesna; Radović, Ivana; Stajčić, Aleksandar; Vlahović, Branislav

(Basel : MDPI, 2020)

TY  - JOUR
AU  - Mitić, Vojislav V.
AU  - Lazović, Goran
AU  - Lu, Chun-An
AU  - Paunović, Vesna
AU  - Radović, Ivana
AU  - Stajčić, Aleksandar
AU  - Vlahović, Branislav
PY  - 2020
UR  - http://dais.sanu.ac.rs/123456789/8957
AB  - The BaTiO3 ceramics applications based on electronic properties have very high gradient scientific and industrial-technological interests. Our scientific research has been based on nano BaTiO3 modified with Yttrium based organometallic salt (MOD-Y). The samples have been consolidated at a sintering temperature of 1350 °C. Within the study, the new frontiers for different electronic properties between the layers of BaTiO3 grains have been introduced. The research target was grain boundary investigations and the influence on dielectric properties. After scanning electron microscopy and dielectric measurements, it has been established that modified BaTiO3 samples with larger grains showed a better compact state that led to a higher dielectric constant value. DC bias stability was also investigated and showed a connection between the grain size and capacitance stability. Analyses of functions that could approximate experimental curves were successfully employed. Practical application of fractal corrections was performed, based on surface (αs) and pore size (αp) corrections, which resulted in obtainment of the relation between the capacitance and Curie temperature. Successful introduction of fractal corrections for capacitance-Curie temperature dependence for a set of experimental data is an important step towards further miniaturization of intergranular capacitors. © 2020 by the authors.
PB  - Basel : MDPI
T2  - Applied Sciences (Switzerland)
T1  - The Nano-Scale Modified BaTiO3 Morphology Influence on Electronic Properties and Ceramics Fractal Nature Frontiers
SP  - 3485
VL  - 10
IS  - 10
DO  - 10.3390/app10103485
ER  - 
@article{
author = "Mitić, Vojislav V. and Lazović, Goran and Lu, Chun-An and Paunović, Vesna and Radović, Ivana and Stajčić, Aleksandar and Vlahović, Branislav",
year = "2020",
url = "http://dais.sanu.ac.rs/123456789/8957",
abstract = "The BaTiO3 ceramics applications based on electronic properties have very high gradient scientific and industrial-technological interests. Our scientific research has been based on nano BaTiO3 modified with Yttrium based organometallic salt (MOD-Y). The samples have been consolidated at a sintering temperature of 1350 °C. Within the study, the new frontiers for different electronic properties between the layers of BaTiO3 grains have been introduced. The research target was grain boundary investigations and the influence on dielectric properties. After scanning electron microscopy and dielectric measurements, it has been established that modified BaTiO3 samples with larger grains showed a better compact state that led to a higher dielectric constant value. DC bias stability was also investigated and showed a connection between the grain size and capacitance stability. Analyses of functions that could approximate experimental curves were successfully employed. Practical application of fractal corrections was performed, based on surface (αs) and pore size (αp) corrections, which resulted in obtainment of the relation between the capacitance and Curie temperature. Successful introduction of fractal corrections for capacitance-Curie temperature dependence for a set of experimental data is an important step towards further miniaturization of intergranular capacitors. © 2020 by the authors.",
publisher = "Basel : MDPI",
journal = "Applied Sciences (Switzerland)",
title = "The Nano-Scale Modified BaTiO3 Morphology Influence on Electronic Properties and Ceramics Fractal Nature Frontiers",
pages = "3485",
volume = "10",
number = "10",
doi = "10.3390/app10103485"
}
Mitić, V. V., Lazović, G., Lu, C., Paunović, V., Radović, I., Stajčić, A.,& Vlahović, B. (2020). The Nano-Scale Modified BaTiO3 Morphology Influence on Electronic Properties and Ceramics Fractal Nature Frontiers.
Applied Sciences (Switzerland)Basel : MDPI., 10(10), 3485. 
https://doi.org/10.3390/app10103485
Mitić VV, Lazović G, Lu C, Paunović V, Radović I, Stajčić A, Vlahović B. The Nano-Scale Modified BaTiO3 Morphology Influence on Electronic Properties and Ceramics Fractal Nature Frontiers. Applied Sciences (Switzerland). 2020;10(10):3485
1

Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing

Nikolić, Maria Vesna; Vasiljević, Zorka Ž.; Luković, Miloljub D.; Pavlović, Vera P.; Krstić, Jugoslav B.; Vujančević, Jelena; Tadić, Nenad B.; Vlahović, Branislav; Pavlović, Vladimir B.

(John Wiley & Sons, Inc., 2019)

TY  - JOUR
AU  - Nikolić, Maria Vesna
AU  - Vasiljević, Zorka Ž.
AU  - Luković, Miloljub D.
AU  - Pavlović, Vera P.
AU  - Krstić, Jugoslav B.
AU  - Vujančević, Jelena
AU  - Tadić, Nenad B.
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/ijac.13190
UR  - http://dais.sanu.ac.rs/123456789/4848
AB  - Zinc ferrite nanocrystalline powder was obtained by solid state synthesis of starting zinc oxide and hematite nanopowders. Field emission scanning electron microscopy (FESEM and transmission electron microscopy (TEM), X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS) and Raman spectroscopy confirmed the formation of nanocrystalline zinc‐ferrite powder with a mixed spinel structure with small amounts of remaining zinc oxide and hematite as impurities. Thick film paste was formed and screen printed on test interdigitated PdAg electrodes on alumina substrate. Formation of a porous nanocrystalline structure was confirmed by scanning electron microscopy (SEM) and Hg porosimetry. Humidity sensing properties of zinc ferrite thick films were investigated by monitoring the change in impedance in the relative humidity interval 30‐90% in the frequency range 42 Hz – 1 MHz at room temperature (25 °C) and 50 °C. At 42 Hz at both analyzed temperatures the impedance reduced ~ 46 times in the humidity range 30‐90%. The dominant influence of grain boundaries was confirmed by analysis of complex impedance with an equivalent circuit.
PB  - John Wiley & Sons, Inc.
T2  - International Journal of Applied Ceramic Technology
T1  - Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing
SP  - 981
EP  - 993
VL  - 16
IS  - 3
DO  - 10.1111/ijac.13190
ER  - 
@article{
author = "Nikolić, Maria Vesna and Vasiljević, Zorka Ž. and Luković, Miloljub D. and Pavlović, Vera P. and Krstić, Jugoslav B. and Vujančević, Jelena and Tadić, Nenad B. and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2019",
url = "https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/ijac.13190, http://dais.sanu.ac.rs/123456789/4848",
abstract = "Zinc ferrite nanocrystalline powder was obtained by solid state synthesis of starting zinc oxide and hematite nanopowders. Field emission scanning electron microscopy (FESEM and transmission electron microscopy (TEM), X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS) and Raman spectroscopy confirmed the formation of nanocrystalline zinc‐ferrite powder with a mixed spinel structure with small amounts of remaining zinc oxide and hematite as impurities. Thick film paste was formed and screen printed on test interdigitated PdAg electrodes on alumina substrate. Formation of a porous nanocrystalline structure was confirmed by scanning electron microscopy (SEM) and Hg porosimetry. Humidity sensing properties of zinc ferrite thick films were investigated by monitoring the change in impedance in the relative humidity interval 30‐90% in the frequency range 42 Hz – 1 MHz at room temperature (25 °C) and 50 °C. At 42 Hz at both analyzed temperatures the impedance reduced ~ 46 times in the humidity range 30‐90%. The dominant influence of grain boundaries was confirmed by analysis of complex impedance with an equivalent circuit.",
publisher = "John Wiley & Sons, Inc.",
journal = "International Journal of Applied Ceramic Technology",
title = "Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing",
pages = "981-993",
volume = "16",
number = "3",
doi = "10.1111/ijac.13190"
}
Nikolić, M. V., Vasiljević, Z. Ž., Luković, M. D., Pavlović, V. P., Krstić, J. B., Vujančević, J., Tadić, N. B., Vlahović, B.,& Pavlović, V. B. (2019). Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing.
International Journal of Applied Ceramic TechnologyJohn Wiley & Sons, Inc.., 16(3), 981-993. 
https://doi.org/10.1111/ijac.13190
Nikolić MV, Vasiljević ZŽ, Luković MD, Pavlović VP, Krstić JB, Vujančević J, Tadić NB, Vlahović B, Pavlović VB. Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing. International Journal of Applied Ceramic Technology. 2019;16(3):981-993
9
4
8

Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing

Nikolić, Maria Vesna; Vasiljević, Zorka Ž.; Luković, Miloljub D.; Pavlović, Vera P.; Krstić, Jugoslav B.; Vujančević, Jelena; Tadić, Nenad B.; Vlahović, Branislav; Pavlović, Vladimir B.

(John Wiley & Sons, Inc., 2019)

TY  - JOUR
AU  - Nikolić, Maria Vesna
AU  - Vasiljević, Zorka Ž.
AU  - Luković, Miloljub D.
AU  - Pavlović, Vera P.
AU  - Krstić, Jugoslav B.
AU  - Vujančević, Jelena
AU  - Tadić, Nenad B.
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/ijac.13190
UR  - http://dais.sanu.ac.rs/123456789/5766
AB  - Zinc ferrite nanocrystalline powder was obtained by solid state synthesis of starting zinc oxide and hematite nanopowders. Field emission scanning electron microscopy (FESEM and transmission electron microscopy (TEM), X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS) and Raman spectroscopy confirmed the formation of nanocrystalline zinc‐ferrite powder with a mixed spinel structure with small amounts of remaining zinc oxide and hematite as impurities. Thick film paste was formed and screen printed on test interdigitated PdAg electrodes on alumina substrate. Formation of a porous nanocrystalline structure was confirmed by scanning electron microscopy (SEM) and Hg porosimetry. Humidity sensing properties of zinc ferrite thick films were investigated by monitoring the change in impedance in the relative humidity interval 30‐90% in the frequency range 42 Hz – 1 MHz at room temperature (25 °C) and 50 °C. At 42 Hz at both analyzed temperatures the impedance reduced ~ 46 times in the humidity range 30‐90%. The dominant influence of grain boundaries was confirmed by analysis of complex impedance with an equivalent circuit.
PB  - John Wiley & Sons, Inc.
T2  - International Journal of Applied Ceramic Technology
T1  - Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing
SP  - 981
EP  - 993
VL  - 16
IS  - 3
DO  - 10.1111/ijac.13190
ER  - 
@article{
author = "Nikolić, Maria Vesna and Vasiljević, Zorka Ž. and Luković, Miloljub D. and Pavlović, Vera P. and Krstić, Jugoslav B. and Vujančević, Jelena and Tadić, Nenad B. and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2019",
url = "https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/ijac.13190, http://dais.sanu.ac.rs/123456789/5766",
abstract = "Zinc ferrite nanocrystalline powder was obtained by solid state synthesis of starting zinc oxide and hematite nanopowders. Field emission scanning electron microscopy (FESEM and transmission electron microscopy (TEM), X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS) and Raman spectroscopy confirmed the formation of nanocrystalline zinc‐ferrite powder with a mixed spinel structure with small amounts of remaining zinc oxide and hematite as impurities. Thick film paste was formed and screen printed on test interdigitated PdAg electrodes on alumina substrate. Formation of a porous nanocrystalline structure was confirmed by scanning electron microscopy (SEM) and Hg porosimetry. Humidity sensing properties of zinc ferrite thick films were investigated by monitoring the change in impedance in the relative humidity interval 30‐90% in the frequency range 42 Hz – 1 MHz at room temperature (25 °C) and 50 °C. At 42 Hz at both analyzed temperatures the impedance reduced ~ 46 times in the humidity range 30‐90%. The dominant influence of grain boundaries was confirmed by analysis of complex impedance with an equivalent circuit.",
publisher = "John Wiley & Sons, Inc.",
journal = "International Journal of Applied Ceramic Technology",
title = "Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing",
pages = "981-993",
volume = "16",
number = "3",
doi = "10.1111/ijac.13190"
}
Nikolić, M. V., Vasiljević, Z. Ž., Luković, M. D., Pavlović, V. P., Krstić, J. B., Vujančević, J., Tadić, N. B., Vlahović, B.,& Pavlović, V. B. (2019). Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing.
International Journal of Applied Ceramic TechnologyJohn Wiley & Sons, Inc.., 16(3), 981-993. 
https://doi.org/10.1111/ijac.13190
Nikolić MV, Vasiljević ZŽ, Luković MD, Pavlović VP, Krstić JB, Vujančević J, Tadić NB, Vlahović B, Pavlović VB. Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing. International Journal of Applied Ceramic Technology. 2019;16(3):981-993
9
4
8

Structure and enhanced antimicrobial activity of mechanically activated nano TiO2

Pavlović, Vera P.; Vujančević, Jelena; Mašković, Pavle; Ćirković, Jovana; Papan, Jelena M.; Kosanović, Darko; Dramićanin, Miroslav; Petrović, Predrag B.; Vlahović, Branislav; Pavlović, Vladimir B.

(Wiley, 2019)

TY  - JOUR
AU  - Pavlović, Vera P.
AU  - Vujančević, Jelena
AU  - Mašković, Pavle
AU  - Ćirković, Jovana
AU  - Papan, Jelena M.
AU  - Kosanović, Darko
AU  - Dramićanin, Miroslav
AU  - Petrović, Predrag B.
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/jace.16668
UR  - http://dais.sanu.ac.rs/123456789/6453
AB  - Titanium dioxide is a photocatalyst, known not only for its ability to oxidize organic contaminants, but also for its antimicrobial properties. In this article, significant enhancement of the antimicrobial activity of TiO2 (up to 32 times) was demonstrated after its activation by ball milling. The antimicrobial activity was analyzed for one fungal and 13 bacterial ATCC strains using the microdilution method and recording the minimum inhibitory concentration (MIC) values. In order to further investigate the correlation between the mechanical activation of TiO2 and its antimicrobial activity, the structure, morphology and phase composition of the material were studied by means of Electron Microscopy, X-ray diffraction and nitrogen adsorption-desorption measurements. UV-Vis diffuse reflectance spectra were recorded and the Kubelka-Munk function was applied to convert reflectance into the equivalent band gap energy (Eg) and, consequently, to investigate changes in the Eg value. X-ray photoelectron spectroscopy was used to analyze the influence of mechanical activation on the Ti 2p and O 1s spectra. The presented results are expected to enable the development of more sustainable and effective advanced TiO2-based materials with antimicrobial properties that could be used in numerous green technology applications.
PB  - Wiley
T2  - Journal of the American Ceramic Society
T1  - Structure and enhanced antimicrobial activity of mechanically activated nano TiO2
SP  - 7735
EP  - 7745
VL  - 102
IS  - 12
DO  - 10.1111/jace.16668
ER  - 
@article{
author = "Pavlović, Vera P. and Vujančević, Jelena and Mašković, Pavle and Ćirković, Jovana and Papan, Jelena M. and Kosanović, Darko and Dramićanin, Miroslav and Petrović, Predrag B. and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2019",
url = "https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/jace.16668, http://dais.sanu.ac.rs/123456789/6453",
abstract = "Titanium dioxide is a photocatalyst, known not only for its ability to oxidize organic contaminants, but also for its antimicrobial properties. In this article, significant enhancement of the antimicrobial activity of TiO2 (up to 32 times) was demonstrated after its activation by ball milling. The antimicrobial activity was analyzed for one fungal and 13 bacterial ATCC strains using the microdilution method and recording the minimum inhibitory concentration (MIC) values. In order to further investigate the correlation between the mechanical activation of TiO2 and its antimicrobial activity, the structure, morphology and phase composition of the material were studied by means of Electron Microscopy, X-ray diffraction and nitrogen adsorption-desorption measurements. UV-Vis diffuse reflectance spectra were recorded and the Kubelka-Munk function was applied to convert reflectance into the equivalent band gap energy (Eg) and, consequently, to investigate changes in the Eg value. X-ray photoelectron spectroscopy was used to analyze the influence of mechanical activation on the Ti 2p and O 1s spectra. The presented results are expected to enable the development of more sustainable and effective advanced TiO2-based materials with antimicrobial properties that could be used in numerous green technology applications.",
publisher = "Wiley",
journal = "Journal of the American Ceramic Society",
title = "Structure and enhanced antimicrobial activity of mechanically activated nano TiO2",
pages = "7735-7745",
volume = "102",
number = "12",
doi = "10.1111/jace.16668"
}
Pavlović, V. P., Vujančević, J., Mašković, P., Ćirković, J., Papan, J. M., Kosanović, D., Dramićanin, M., Petrović, P. B., Vlahović, B.,& Pavlović, V. B. (2019). Structure and enhanced antimicrobial activity of mechanically activated nano TiO2.
Journal of the American Ceramic SocietyWiley., 102(12), 7735-7745. 
https://doi.org/10.1111/jace.16668
Pavlović VP, Vujančević J, Mašković P, Ćirković J, Papan JM, Kosanović D, Dramićanin M, Petrović PB, Vlahović B, Pavlović VB. Structure and enhanced antimicrobial activity of mechanically activated nano TiO2. Journal of the American Ceramic Society. 2019;102(12):7735-7745
4
1
2

Structure and enhanced antimicrobial activity of mechanically activated nano TiO2

Pavlović, Vera P.; Vujančević, Jelena; Mašković, Pavle; Ćirković, Jovana; Papan, Jelena M.; Kosanović, Darko; Dramićanin, Miroslav; Petrović, Predrag B.; Vlahović, Branislav; Pavlović, Vladimir B.

(Wiley, 2019)

TY  - JOUR
AU  - Pavlović, Vera P.
AU  - Vujančević, Jelena
AU  - Mašković, Pavle
AU  - Ćirković, Jovana
AU  - Papan, Jelena M.
AU  - Kosanović, Darko
AU  - Dramićanin, Miroslav
AU  - Petrović, Predrag B.
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/jace.16668
UR  - http://dais.sanu.ac.rs/123456789/6454
AB  - Titanium dioxide is a photocatalyst, known not only for its ability to oxidize organic contaminants, but also for its antimicrobial properties. In this article, significant enhancement of the antimicrobial activity of TiO2 (up to 32 times) was demonstrated after its activation by ball milling. The antimicrobial activity was analyzed for one fungal and 13 bacterial ATCC strains using the microdilution method and recording the minimum inhibitory concentration (MIC) values. In order to further investigate the correlation between the mechanical activation of TiO2 and its antimicrobial activity, the structure, morphology and phase composition of the material were studied by means of Electron Microscopy, X-ray diffraction and nitrogen adsorption-desorption measurements. UV-Vis diffuse reflectance spectra were recorded and the Kubelka-Munk function was applied to convert reflectance into the equivalent band gap energy (Eg) and, consequently, to investigate changes in the Eg value. X-ray photoelectron spectroscopy was used to analyze the influence of mechanical activation on the Ti 2p and O 1s spectra. The presented results are expected to enable the development of more sustainable and effective advanced TiO2-based materials with antimicrobial properties that could be used in numerous green technology applications.
PB  - Wiley
T2  - Journal of the American Ceramic Society
T1  - Structure and enhanced antimicrobial activity of mechanically activated nano TiO2
SP  - 7735
EP  - 7745
VL  - 102
IS  - 12
DO  - 10.1111/jace.16668
ER  - 
@article{
author = "Pavlović, Vera P. and Vujančević, Jelena and Mašković, Pavle and Ćirković, Jovana and Papan, Jelena M. and Kosanović, Darko and Dramićanin, Miroslav and Petrović, Predrag B. and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2019",
url = "https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/jace.16668, http://dais.sanu.ac.rs/123456789/6454",
abstract = "Titanium dioxide is a photocatalyst, known not only for its ability to oxidize organic contaminants, but also for its antimicrobial properties. In this article, significant enhancement of the antimicrobial activity of TiO2 (up to 32 times) was demonstrated after its activation by ball milling. The antimicrobial activity was analyzed for one fungal and 13 bacterial ATCC strains using the microdilution method and recording the minimum inhibitory concentration (MIC) values. In order to further investigate the correlation between the mechanical activation of TiO2 and its antimicrobial activity, the structure, morphology and phase composition of the material were studied by means of Electron Microscopy, X-ray diffraction and nitrogen adsorption-desorption measurements. UV-Vis diffuse reflectance spectra were recorded and the Kubelka-Munk function was applied to convert reflectance into the equivalent band gap energy (Eg) and, consequently, to investigate changes in the Eg value. X-ray photoelectron spectroscopy was used to analyze the influence of mechanical activation on the Ti 2p and O 1s spectra. The presented results are expected to enable the development of more sustainable and effective advanced TiO2-based materials with antimicrobial properties that could be used in numerous green technology applications.",
publisher = "Wiley",
journal = "Journal of the American Ceramic Society",
title = "Structure and enhanced antimicrobial activity of mechanically activated nano TiO2",
pages = "7735-7745",
volume = "102",
number = "12",
doi = "10.1111/jace.16668"
}
Pavlović, V. P., Vujančević, J., Mašković, P., Ćirković, J., Papan, J. M., Kosanović, D., Dramićanin, M., Petrović, P. B., Vlahović, B.,& Pavlović, V. B. (2019). Structure and enhanced antimicrobial activity of mechanically activated nano TiO2.
Journal of the American Ceramic SocietyWiley., 102(12), 7735-7745. 
https://doi.org/10.1111/jace.16668
Pavlović VP, Vujančević J, Mašković P, Ćirković J, Papan JM, Kosanović D, Dramićanin M, Petrović PB, Vlahović B, Pavlović VB. Structure and enhanced antimicrobial activity of mechanically activated nano TiO2. Journal of the American Ceramic Society. 2019;102(12):7735-7745
4
1
1

BaTiO3-ceramics electroresistivity and Haywang intergranular capacity fractals model

Mitić, Vojislav V.; Lazović, Goran; Paunović, Vesna; Veljković, Sandra; Huang, W. C.; Vlahović, Branislav

(Societa ceramica italiana, 2019)

TY  - CONF
AU  - Mitić, Vojislav V.
AU  - Lazović, Goran
AU  - Paunović, Vesna
AU  - Veljković, Sandra
AU  - Huang, W. C.
AU  - Vlahović, Branislav
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/7023
AB  - BaTiO3-ceramics is very well known electroceramics material and has a more than 300, now a days, very advanced applications. The atomic structures packed by Euclidian geometry, up to the nano sizes, are not suitable for particles flows and irregular structures. In order to analyze more originally these structures, apply fractal nature approach. There is existing trend in the now a days literature that a wide range of disordered systems can be characterized by the fractal nature over a microscopic correlation length. The modern ceramics science, faces with very important priorities of the future frontiers which opens new directions within higher knowledge structure even down to nano and due to lack of energy, towards new and alternative energy sources. There is a fact, that energy transformations are permitted on a small scale. Through our actual research we recognize that BaTiO3 and other electronics ceramics have fractal configuration nature based on three phenomena. Ceramic grains have fractal shape seeing as a contour in cross section or as a surface; the other one phenomena is related to so called “negative space” made of pores and inter-granular space. The porosity is extremely complex and has very important role in microelectronics, micro-capacity, PTC, piezoelectric and other phenomena. The third, there is Brownian process of fractal motions inside the material, during and after sintering, in the form of micro-particles flow (ions, atoms and electrons). These is important phenomenology based on inter-granular micro-capacity and super micro-capacitors in function of higher energy harvesting and storage. Fractal nature theory allows recognizing micro-capacitors with fractal electrodes. The method is based on iterative process which is compatible with the grains and pores model. In this paper, based on fractals corrected Heywang model, we analyse the electroresistivity as a part of intergranular micro-impedance. Also, we successfully applied the complex fractal correction on thermodynamic parameters, especially the temperature. On this way we continue to open the new fractal nature frontiers within the electro parameters, like elastoresistivity.
PB  - Societa ceramica italiana
PB  - Politecnico di Torino
C3  - Abstract Book / XVI Conference and Exhibition of the European Ceramic Society XVI ECerS Conference, Torino, 16-20 June 2019
T1  - BaTiO3-ceramics electroresistivity and Haywang intergranular capacity fractals model
SP  - 515
EP  - 515
ER  - 
@conference{
author = "Mitić, Vojislav V. and Lazović, Goran and Paunović, Vesna and Veljković, Sandra and Huang, W. C. and Vlahović, Branislav",
year = "2019",
url = "http://dais.sanu.ac.rs/123456789/7023",
abstract = "BaTiO3-ceramics is very well known electroceramics material and has a more than 300, now a days, very advanced applications. The atomic structures packed by Euclidian geometry, up to the nano sizes, are not suitable for particles flows and irregular structures. In order to analyze more originally these structures, apply fractal nature approach. There is existing trend in the now a days literature that a wide range of disordered systems can be characterized by the fractal nature over a microscopic correlation length. The modern ceramics science, faces with very important priorities of the future frontiers which opens new directions within higher knowledge structure even down to nano and due to lack of energy, towards new and alternative energy sources. There is a fact, that energy transformations are permitted on a small scale. Through our actual research we recognize that BaTiO3 and other electronics ceramics have fractal configuration nature based on three phenomena. Ceramic grains have fractal shape seeing as a contour in cross section or as a surface; the other one phenomena is related to so called “negative space” made of pores and inter-granular space. The porosity is extremely complex and has very important role in microelectronics, micro-capacity, PTC, piezoelectric and other phenomena. The third, there is Brownian process of fractal motions inside the material, during and after sintering, in the form of micro-particles flow (ions, atoms and electrons). These is important phenomenology based on inter-granular micro-capacity and super micro-capacitors in function of higher energy harvesting and storage. Fractal nature theory allows recognizing micro-capacitors with fractal electrodes. The method is based on iterative process which is compatible with the grains and pores model. In this paper, based on fractals corrected Heywang model, we analyse the electroresistivity as a part of intergranular micro-impedance. Also, we successfully applied the complex fractal correction on thermodynamic parameters, especially the temperature. On this way we continue to open the new fractal nature frontiers within the electro parameters, like elastoresistivity.",
publisher = "Societa ceramica italiana, Politecnico di Torino",
journal = "Abstract Book / XVI Conference and Exhibition of the European Ceramic Society XVI ECerS Conference, Torino, 16-20 June 2019",
title = "BaTiO3-ceramics electroresistivity and Haywang intergranular capacity fractals model",
pages = "515-515"
}
Mitić, V. V., Lazović, G., Paunović, V., Veljković, S., Huang, W. C.,& Vlahović, B. (2019). BaTiO3-ceramics electroresistivity and Haywang intergranular capacity fractals model.
Abstract Book / XVI Conference and Exhibition of the European Ceramic Society XVI ECerS Conference, Torino, 16-20 June 2019Societa ceramica italiana., null, 515-515. 
Mitić VV, Lazović G, Paunović V, Veljković S, Huang WC, Vlahović B. BaTiO3-ceramics electroresistivity and Haywang intergranular capacity fractals model. Abstract Book / XVI Conference and Exhibition of the European Ceramic Society XVI ECerS Conference, Torino, 16-20 June 2019. 2019;:515-515

Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal

Rusmirović, Jelena; Obradović, Nina; Perendija, Jovana; Umićević, Ana; Kapidžić, Ana; Vlahović, Branislav; Pavlović, Vera P.; Marinković, Aleksandar D.; Pavlović, Vladimir B.

(Springer, 2019)

TY  - JOUR
AU  - Rusmirović, Jelena
AU  - Obradović, Nina
AU  - Perendija, Jovana
AU  - Umićević, Ana
AU  - Kapidžić, Ana
AU  - Vlahović, Branislav
AU  - Pavlović, Vera P.
AU  - Marinković, Aleksandar D.
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/5764
AB  - Iron oxide, in the form of magnetite (MG)–functionalized porous wollastonite (WL), was used as an adsorbent for heavy metal ions (cadmium and nickel) and oxyanions (chromate and phosphate) removal from water. The porous WL was synthesized from calcium carbonate and siloxane by controlled sintering process using low molecular weight submicrosized poly(methyl methacrylate) as a pore-forming agent. The precipitation of MG nanoparticles was carried out directly by a polyol-medium solvothermal method or via branched amino/carboxylic acid cross-linker by solvent/nonsolvent method producing WL/MG and WL-γ-APS/MG adsorbents, respectively. The structure/properties of MG functionalized WL was confirmed by applying FTIR, Raman, XRD, Mössbauer, and SEM analysis. Higher adsorption capacities of 73.126, 66.144, 64.168, and 63.456 mg g−1 for WL-γ-APS/MG in relation to WL/MG of 55.450, 52.019, 48.132, and 47.382 mg g−1 for Cd2+, Ni2+, phosphate, and chromate, respectively, were obtained using nonlinear Langmuir model fitting. Adsorption phenomena were analyzed using monolayer statistical physics model for single adsorption with one energy. Kinetic study showed exceptionally higher pseudo-second-order rate constants for WL-γ-APS/MG, e.g., 1.17–13.4 times, with respect to WL/MG indicating importance of both WL surface modification and controllable precipitation of MG on WL-γ-APS.
PB  - Springer
T2  - Environmental Science and Pollution Research
T1  - Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal
SP  - 12379
EP  - 12398
VL  - 26
IS  - 12
DO  - 10.1007/s11356-019-04625-0
ER  - 
@article{
author = "Rusmirović, Jelena and Obradović, Nina and Perendija, Jovana and Umićević, Ana and Kapidžić, Ana and Vlahović, Branislav and Pavlović, Vera P. and Marinković, Aleksandar D. and Pavlović, Vladimir B.",
year = "2019",
url = "http://dais.sanu.ac.rs/123456789/5764",
abstract = "Iron oxide, in the form of magnetite (MG)–functionalized porous wollastonite (WL), was used as an adsorbent for heavy metal ions (cadmium and nickel) and oxyanions (chromate and phosphate) removal from water. The porous WL was synthesized from calcium carbonate and siloxane by controlled sintering process using low molecular weight submicrosized poly(methyl methacrylate) as a pore-forming agent. The precipitation of MG nanoparticles was carried out directly by a polyol-medium solvothermal method or via branched amino/carboxylic acid cross-linker by solvent/nonsolvent method producing WL/MG and WL-γ-APS/MG adsorbents, respectively. The structure/properties of MG functionalized WL was confirmed by applying FTIR, Raman, XRD, Mössbauer, and SEM analysis. Higher adsorption capacities of 73.126, 66.144, 64.168, and 63.456 mg g−1 for WL-γ-APS/MG in relation to WL/MG of 55.450, 52.019, 48.132, and 47.382 mg g−1 for Cd2+, Ni2+, phosphate, and chromate, respectively, were obtained using nonlinear Langmuir model fitting. Adsorption phenomena were analyzed using monolayer statistical physics model for single adsorption with one energy. Kinetic study showed exceptionally higher pseudo-second-order rate constants for WL-γ-APS/MG, e.g., 1.17–13.4 times, with respect to WL/MG indicating importance of both WL surface modification and controllable precipitation of MG on WL-γ-APS.",
publisher = "Springer",
journal = "Environmental Science and Pollution Research",
title = "Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal",
pages = "12379-12398",
volume = "26",
number = "12",
doi = "10.1007/s11356-019-04625-0"
}
Rusmirović, J., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V. P., Marinković, A. D.,& Pavlović, V. B. (2019). Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal.
Environmental Science and Pollution ResearchSpringer., 26(12), 12379-12398. 
https://doi.org/10.1007/s11356-019-04625-0
Rusmirović J, Obradović N, Perendija J, Umićević A, Kapidžić A, Vlahović B, Pavlović VP, Marinković AD, Pavlović VB. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. Environmental Science and Pollution Research. 2019;26(12):12379-12398
1
4
4
6

Electronic ceramics fractal microstructure analysis - Minkowski Hull and grain boundaries

Mitić, Vojislav V.; Lazović, Goran; Paunović, Vesna; Veljković, Sandra; Ranđelović, Branislav; Vlahović, Branislav; Fecht, Hans

(Taylor & Francis, 2019)

TY  - JOUR
AU  - Mitić, Vojislav V.
AU  - Lazović, Goran
AU  - Paunović, Vesna
AU  - Veljković, Sandra
AU  - Ranđelović, Branislav
AU  - Vlahović, Branislav
AU  - Fecht, Hans
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/6686
AB  - Consolidation parameters have influence and can be used to control structure of BaTiO3 based materials. Microstructure and dielectric properties of Yb2O3 doped BaTiO3-ceramics, sintered from 1320 °C to 1380 °C have been investigated. The correlation between microstructure, capacity and dielectric properties of doped BaTiO3-ceramics, based on fractal geometry and micro-contact surfaces, has been developed. Using the fractal descriptors of the grains contact surface, the microstructure reconstruction constituents, as grains and pores shapes or intergranular contacts, has been successfully done. Obtained results indicated that fractal analysis contact surfaces descriptors of different shapes are very important for the prognosis of BaTiO3-ceramics microstructure and capacity and dielectric properties. The morphology of ceramics grains pointed out the validity of developing new structure analytical methods, based on different grains’ shape geometries. The grains contact structure based on Minkowski hull is presented as a new tool for BaTiO3-ceramics materials structure research. The materials properties prognosis are determined according to the correlations synthesis–structure–property, within Minkowski hull fractal frame. © 2019, © 2019 Taylor & Francis Group, LLC.
PB  - Taylor & Francis
T2  - Ferroelectrics
T1  - Electronic ceramics fractal microstructure analysis - Minkowski Hull and grain boundaries
SP  - 184
EP  - 194
VL  - 545
IS  - 1
DO  - 10.1080/00150193.2019.1621704
ER  - 
@article{
author = "Mitić, Vojislav V. and Lazović, Goran and Paunović, Vesna and Veljković, Sandra and Ranđelović, Branislav and Vlahović, Branislav and Fecht, Hans",
year = "2019",
url = "http://dais.sanu.ac.rs/123456789/6686",
abstract = "Consolidation parameters have influence and can be used to control structure of BaTiO3 based materials. Microstructure and dielectric properties of Yb2O3 doped BaTiO3-ceramics, sintered from 1320 °C to 1380 °C have been investigated. The correlation between microstructure, capacity and dielectric properties of doped BaTiO3-ceramics, based on fractal geometry and micro-contact surfaces, has been developed. Using the fractal descriptors of the grains contact surface, the microstructure reconstruction constituents, as grains and pores shapes or intergranular contacts, has been successfully done. Obtained results indicated that fractal analysis contact surfaces descriptors of different shapes are very important for the prognosis of BaTiO3-ceramics microstructure and capacity and dielectric properties. The morphology of ceramics grains pointed out the validity of developing new structure analytical methods, based on different grains’ shape geometries. The grains contact structure based on Minkowski hull is presented as a new tool for BaTiO3-ceramics materials structure research. The materials properties prognosis are determined according to the correlations synthesis–structure–property, within Minkowski hull fractal frame. © 2019, © 2019 Taylor & Francis Group, LLC.",
publisher = "Taylor & Francis",
journal = "Ferroelectrics",
title = "Electronic ceramics fractal microstructure analysis - Minkowski Hull and grain boundaries",
pages = "184-194",
volume = "545",
number = "1",
doi = "10.1080/00150193.2019.1621704"
}
Mitić, V. V., Lazović, G., Paunović, V., Veljković, S., Ranđelović, B., Vlahović, B.,& Fecht, H. (2019). Electronic ceramics fractal microstructure analysis - Minkowski Hull and grain boundaries.
FerroelectricsTaylor & Francis., 545(1), 184-194. 
https://doi.org/10.1080/00150193.2019.1621704
Mitić VV, Lazović G, Paunović V, Veljković S, Ranđelović B, Vlahović B, Fecht H. Electronic ceramics fractal microstructure analysis - Minkowski Hull and grain boundaries. Ferroelectrics. 2019;545(1):184-194

Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal

Rusmirović, Jelena; Obradović, Nina; Perendija, Jovana; Umićević, Ana; Kapidžić, Ana; Vlahović, Branislav; Pavlović, Vera; Marinković, Aleksandar D.; Pavlović, Vladimir B.

(Springer, 2019)

TY  - JOUR
AU  - Rusmirović, Jelena
AU  - Obradović, Nina
AU  - Perendija, Jovana
AU  - Umićević, Ana
AU  - Kapidžić, Ana
AU  - Vlahović, Branislav
AU  - Pavlović, Vera
AU  - Marinković, Aleksandar D.
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - https://doi.org/10.1007/s11356-019-04625-0
UR  - http://dais.sanu.ac.rs/123456789/5273
AB  - Iron oxide, in the form of magnetite (MG)–functionalized porous wollastonite (WL), was used as an adsorbent for heavy metal ions (cadmium and nickel) and oxyanions (chromate and phosphate) removal from water. The porous WL was synthesized from calcium carbonate and siloxane by controlled sintering process using low molecular weight submicrosized poly(methyl methacrylate) as a pore-forming agent. The precipitation of MG nanoparticles was carried out directly by a polyol-medium solvothermal method or via branched amino/carboxylic acid cross-linker by solvent/nonsolvent method producing WL/MG and WL-γ-APS/MG adsorbents, respectively. The structure/properties of MG functionalized WL was confirmed by applying FTIR, Raman, XRD, Mössbauer, and SEM analysis. Higher adsorption capacities of 73.126, 66.144, 64.168, and 63.456 mg g−1 for WL-γ-APS/MG in relation to WL/MG of 55.450, 52.019, 48.132, and 47.382 mg g−1 for Cd2+, Ni2+, phosphate, and chromate, respectively, were obtained using nonlinear Langmuir model fitting. Adsorption phenomena were analyzed using monolayer statistical physics model for single adsorption with one energy. Kinetic study showed exceptionally higher pseudo-second-order rate constants for WL-γ-APS/MG, e.g., 1.17–13.4 times, with respect to WL/MG indicating importance of both WL surface modification and controllable precipitation of MG on WL-γ-APS.
PB  - Springer
T2  - Environmental Science and Pollution Research
T1  - Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal
SP  - 12379
EP  - 12398
VL  - 26
IS  - 12
DO  - 10.1007/s11356-019-04625-0
ER  - 
@article{
author = "Rusmirović, Jelena and Obradović, Nina and Perendija, Jovana and Umićević, Ana and Kapidžić, Ana and Vlahović, Branislav and Pavlović, Vera and Marinković, Aleksandar D. and Pavlović, Vladimir B.",
year = "2019",
url = "https://doi.org/10.1007/s11356-019-04625-0, http://dais.sanu.ac.rs/123456789/5273",
abstract = "Iron oxide, in the form of magnetite (MG)–functionalized porous wollastonite (WL), was used as an adsorbent for heavy metal ions (cadmium and nickel) and oxyanions (chromate and phosphate) removal from water. The porous WL was synthesized from calcium carbonate and siloxane by controlled sintering process using low molecular weight submicrosized poly(methyl methacrylate) as a pore-forming agent. The precipitation of MG nanoparticles was carried out directly by a polyol-medium solvothermal method or via branched amino/carboxylic acid cross-linker by solvent/nonsolvent method producing WL/MG and WL-γ-APS/MG adsorbents, respectively. The structure/properties of MG functionalized WL was confirmed by applying FTIR, Raman, XRD, Mössbauer, and SEM analysis. Higher adsorption capacities of 73.126, 66.144, 64.168, and 63.456 mg g−1 for WL-γ-APS/MG in relation to WL/MG of 55.450, 52.019, 48.132, and 47.382 mg g−1 for Cd2+, Ni2+, phosphate, and chromate, respectively, were obtained using nonlinear Langmuir model fitting. Adsorption phenomena were analyzed using monolayer statistical physics model for single adsorption with one energy. Kinetic study showed exceptionally higher pseudo-second-order rate constants for WL-γ-APS/MG, e.g., 1.17–13.4 times, with respect to WL/MG indicating importance of both WL surface modification and controllable precipitation of MG on WL-γ-APS.",
publisher = "Springer",
journal = "Environmental Science and Pollution Research",
title = "Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal",
pages = "12379-12398",
volume = "26",
number = "12",
doi = "10.1007/s11356-019-04625-0"
}
Rusmirović, J., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V., Marinković, A. D.,& Pavlović, V. B. (2019). Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal.
Environmental Science and Pollution ResearchSpringer., 26(12), 12379-12398. 
https://doi.org/10.1007/s11356-019-04625-0
Rusmirović J, Obradović N, Perendija J, Umićević A, Kapidžić A, Vlahović B, Pavlović V, Marinković AD, Pavlović VB. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. Environmental Science and Pollution Research. 2019;26(12):12379-12398
1
4
4
6

BaTiO3-ceramics and grain growth engineering using fractal nature approach

Nikolić, Zoran; Mitić, Vojislav V.; Lazović, Goran; Vlahović, Branislav; Fecht, Hans-Jörg

(Societa ceramica italiana, 2019)

TY  - CONF
AU  - Nikolić, Zoran
AU  - Mitić, Vojislav V.
AU  - Lazović, Goran
AU  - Vlahović, Branislav
AU  - Fecht, Hans-Jörg
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/7021
AB  - Grain size and morphology of BaTiO3-ceramics are very important characteristics in developing new dielectric devices. Samples with different additives were sintered at different temperatures and times. The microstructure of the samples was observed using scanning electron microscope (SEM). Experimental results indicated well-developed morphology of BaTiO3-ceramics from nano- to micro- scales, with the standard ceramics consolidation procedure. It is observed that the morphology of grains is the function of additives, sintering temperature and sintering time. However, image analysis of grain growth indicated that sintering temperature has a strong impact on the morphology and grain size of the samples in the temperature range 1240 °C to 1380 °C. Kinetic exponents and grain growth fractal dimensions were obtained with the collecting the parameters of same grain exposed to five magnifications by SEM imaging and using appropriate processing software for grain-shape fractal reconstruction. The main results in this paper established the relation between sintering consolidation process and fractal nature influence, as well as complex fractal correction on sintering temperature.
PB  - Societa ceramica italiana
PB  - Politecnico di Torino
C3  - Abstract Book / XVI Conference and Exhibition of the European Ceramic Society XVI ECerS Conference, Torino, 16-20 June 2019
T1  - BaTiO3-ceramics and grain growth engineering using fractal nature approach
SP  - 210
EP  - 210
ER  - 
@conference{
author = "Nikolić, Zoran and Mitić, Vojislav V. and Lazović, Goran and Vlahović, Branislav and Fecht, Hans-Jörg",
year = "2019",
url = "http://dais.sanu.ac.rs/123456789/7021",
abstract = "Grain size and morphology of BaTiO3-ceramics are very important characteristics in developing new dielectric devices. Samples with different additives were sintered at different temperatures and times. The microstructure of the samples was observed using scanning electron microscope (SEM). Experimental results indicated well-developed morphology of BaTiO3-ceramics from nano- to micro- scales, with the standard ceramics consolidation procedure. It is observed that the morphology of grains is the function of additives, sintering temperature and sintering time. However, image analysis of grain growth indicated that sintering temperature has a strong impact on the morphology and grain size of the samples in the temperature range 1240 °C to 1380 °C. Kinetic exponents and grain growth fractal dimensions were obtained with the collecting the parameters of same grain exposed to five magnifications by SEM imaging and using appropriate processing software for grain-shape fractal reconstruction. The main results in this paper established the relation between sintering consolidation process and fractal nature influence, as well as complex fractal correction on sintering temperature.",
publisher = "Societa ceramica italiana, Politecnico di Torino",
journal = "Abstract Book / XVI Conference and Exhibition of the European Ceramic Society XVI ECerS Conference, Torino, 16-20 June 2019",
title = "BaTiO3-ceramics and grain growth engineering using fractal nature approach",
pages = "210-210"
}
Nikolić, Z., Mitić, V. V., Lazović, G., Vlahović, B.,& Fecht, H. (2019). BaTiO3-ceramics and grain growth engineering using fractal nature approach.
Abstract Book / XVI Conference and Exhibition of the European Ceramic Society XVI ECerS Conference, Torino, 16-20 June 2019Societa ceramica italiana., null, 210-210. 
Nikolić Z, Mitić VV, Lazović G, Vlahović B, Fecht H. BaTiO3-ceramics and grain growth engineering using fractal nature approach. Abstract Book / XVI Conference and Exhibition of the European Ceramic Society XVI ECerS Conference, Torino, 16-20 June 2019. 2019;:210-210

The BaTiO3 ferroelectric properties within the microscale fractal nature

Mitić, Vojislav V.; Lazović, Goran; Lu, Chun-An; Paunović, Vesna; Veljković, Sandra; Newman, Nathan; Vlahović, Branislav

(Belgrade : Serbian Ceramic Society, 2019)

TY  - CONF
AU  - Mitić, Vojislav V.
AU  - Lazović, Goran
AU  - Lu, Chun-An
AU  - Paunović, Vesna
AU  - Veljković, Sandra
AU  - Newman, Nathan
AU  - Vlahović, Branislav
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/6979
AB  - The electronic ceramics applications based on ferroelectric and dielectric properties have enormous grow in function of very high microelectronics integrations. We used nano BaTiO3 with different versions of Y2O3 additives. We consolidated samples by sintering process in temperature interval from 1200 C to 1350 C. Here we also present some results as a “pre-coating” process for BaTiO3nano structure. This was quite original experimental process effected on different ferroelectrics characteristics between the grains. By our approach these relations between the grains corresponding to our ideas for fractal microelectronics properties integrations. The fractal nature analysis has been applied, too. We applied the complex fractal corrections between the grains and pores surfaces, including the particles Brownian’s Motion between the boundaries. This is completely new approach to the phenomenas of the ferroelectrics, dielectric and in general electronic properties integrations. we are on the way to create the correlation between the processing, structural and advance electronic properties for modern applications.
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VIII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 23-25. September 2019
T1  - The BaTiO3 ferroelectric properties within the microscale fractal nature
SP  - 36
EP  - 36
ER  - 
@conference{
author = "Mitić, Vojislav V. and Lazović, Goran and Lu, Chun-An and Paunović, Vesna and Veljković, Sandra and Newman, Nathan and Vlahović, Branislav",
year = "2019",
url = "http://dais.sanu.ac.rs/123456789/6979",
abstract = "The electronic ceramics applications based on ferroelectric and dielectric properties have enormous grow in function of very high microelectronics integrations. We used nano BaTiO3 with different versions of Y2O3 additives. We consolidated samples by sintering process in temperature interval from 1200 C to 1350 C. Here we also present some results as a “pre-coating” process for BaTiO3nano structure. This was quite original experimental process effected on different ferroelectrics characteristics between the grains. By our approach these relations between the grains corresponding to our ideas for fractal microelectronics properties integrations. The fractal nature analysis has been applied, too. We applied the complex fractal corrections between the grains and pores surfaces, including the particles Brownian’s Motion between the boundaries. This is completely new approach to the phenomenas of the ferroelectrics, dielectric and in general electronic properties integrations. we are on the way to create the correlation between the processing, structural and advance electronic properties for modern applications.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VIII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 23-25. September 2019",
title = "The BaTiO3 ferroelectric properties within the microscale fractal nature",
pages = "36-36"
}
Mitić, V. V., Lazović, G., Lu, C., Paunović, V., Veljković, S., Newman, N.,& Vlahović, B. (2019). The BaTiO3 ferroelectric properties within the microscale fractal nature.
Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VIII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 23-25. September 2019Belgrade : Serbian Ceramic Society., null, 36-36. 
Mitić VV, Lazović G, Lu C, Paunović V, Veljković S, Newman N, Vlahović B. The BaTiO3 ferroelectric properties within the microscale fractal nature. Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VIII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 23-25. September 2019. 2019;:36-36

Ceramic materials and energy - Extended Coble’s model and fractal nature

Mitić, Vojislav V.; Lazović, Goran; Paunovic, Vesna; Hwu, Jih Ru; Tsay, Shwu-Chen; Perng, Tsong-Ping; Veljković, Sandra; Vlahović, Branislav

(Elsevier, 2019)

TY  - JOUR
AU  - Mitić, Vojislav V.
AU  - Lazović, Goran
AU  - Paunovic, Vesna
AU  - Hwu, Jih Ru
AU  - Tsay, Shwu-Chen
AU  - Perng, Tsong-Ping
AU  - Veljković, Sandra
AU  - Vlahović, Branislav
PY  - 2019
UR  - http://www.sciencedirect.com/science/article/pii/S095522191930233X
UR  - http://dais.sanu.ac.rs/123456789/6945
AB  - The new frontiers open different directions within the higher and deeper knowledge structure using unemployed nano sizes domains. The BaTiO3 and other ceramic materials have fractal configuration nature based on three phenomena. First, ceramic grains have fractal shape looking as a contour in cross section or as a surface. Second, there is the so-called “negative space” made of pores and intergranular space. Third, there is fractal Brownian motion (fBm) within the material, during and after sintering, in the form of microparticle flow: ions, atoms, and electrons. Here, we took upon ourselves the task of extending Coble’s model, with already generalized Euclidean geometries, by fractal nature correction. These triple factors make the very peculiar microelectronic environment electro-static/dynamic combination. The stress is here set on inter-granular micro-capacity in function of higher energy harvesting and storage. Constructive fractal theory allows identifying micro-capacitors with fractal electrodes. The method is based on the iterative process of interpolation which is compatible with the grain model itself. Inter-granular permeability is taken as the fundamental thermodynamic parameter function of temperature and enthalpy (Gibbs free energy), which are very important for a structure-energy relation.
PB  - Elsevier
T2  - Journal of the European Ceramic Society
T1  - Ceramic materials and energy - Extended Coble’s model and fractal nature
SP  - 3513
EP  - 3525
VL  - 39
IS  - 12
DO  - 10.1016/j.jeurceramsoc.2019.04.009
ER  - 
@article{
author = "Mitić, Vojislav V. and Lazović, Goran and Paunovic, Vesna and Hwu, Jih Ru and Tsay, Shwu-Chen and Perng, Tsong-Ping and Veljković, Sandra and Vlahović, Branislav",
year = "2019",
url = "http://www.sciencedirect.com/science/article/pii/S095522191930233X, http://dais.sanu.ac.rs/123456789/6945",
abstract = "The new frontiers open different directions within the higher and deeper knowledge structure using unemployed nano sizes domains. The BaTiO3 and other ceramic materials have fractal configuration nature based on three phenomena. First, ceramic grains have fractal shape looking as a contour in cross section or as a surface. Second, there is the so-called “negative space” made of pores and intergranular space. Third, there is fractal Brownian motion (fBm) within the material, during and after sintering, in the form of microparticle flow: ions, atoms, and electrons. Here, we took upon ourselves the task of extending Coble’s model, with already generalized Euclidean geometries, by fractal nature correction. These triple factors make the very peculiar microelectronic environment electro-static/dynamic combination. The stress is here set on inter-granular micro-capacity in function of higher energy harvesting and storage. Constructive fractal theory allows identifying micro-capacitors with fractal electrodes. The method is based on the iterative process of interpolation which is compatible with the grain model itself. Inter-granular permeability is taken as the fundamental thermodynamic parameter function of temperature and enthalpy (Gibbs free energy), which are very important for a structure-energy relation.",
publisher = "Elsevier",
journal = "Journal of the European Ceramic Society",
title = "Ceramic materials and energy - Extended Coble’s model and fractal nature",
pages = "3513-3525",
volume = "39",
number = "12",
doi = "10.1016/j.jeurceramsoc.2019.04.009"
}
Mitić, V. V., Lazović, G., Paunovic, V., Hwu, J. R., Tsay, S., Perng, T., Veljković, S.,& Vlahović, B. (2019). Ceramic materials and energy - Extended Coble’s model and fractal nature.
Journal of the European Ceramic SocietyElsevier., 39(12), 3513-3525. 
https://doi.org/10.1016/j.jeurceramsoc.2019.04.009
Mitić VV, Lazović G, Paunovic V, Hwu JR, Tsay S, Perng T, Veljković S, Vlahović B. Ceramic materials and energy - Extended Coble’s model and fractal nature. Journal of the European Ceramic Society. 2019;39(12):3513-3525
2
1
1

The BaTiO3 nano-scale coated morphology influence on electronic properties and ceramics fractal nature frontiers

Mitić, Vojislav V.; Lazović, Goran; Lu, Chun-An; Paunović, Vesna; Veljković, Sandra; Fecht, Hans-Jörg; Vlahović, Branislav

(Belgrade : Materials Research Society of Serbia, 2019)

TY  - CONF
AU  - Mitić, Vojislav V.
AU  - Lazović, Goran
AU  - Lu, Chun-An
AU  - Paunović, Vesna
AU  - Veljković, Sandra
AU  - Fecht, Hans-Jörg
AU  - Vlahović, Branislav
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/6680
AB  - The BaTiO3 ceramics applications based on electronic properties have very high gradient scientific and industrial-technological interests. Our scientific research has been based on nano BaTiO3 with MOD-Y salts and also on Y2O3. The samples have been consolidated at sintering interval 1200–1350 °C. We demonstrate the new frontiers for different electronic properties between the layers of BaTiO3 grains. As a research target we had GB composite, Nano size metal oxide dispersions, ACDC safety capacitance, nano scale grain boundary control, capacitance, GB control mobility in DC BS operation voltage. We applied all related characterizations and especially SEM. Fractal nature characterization and corrections include influences grains and pores surface and Brownian motions of particles. We established relation with all of this characteristics and temperature. Throw this experiments and results and fractals characterization, we opened new perspectives for higher electronic properties integrations between the grains and practically established the control within the processing, morphological structures and designing the properties. This is very important, new approach towards further miniaturization-fractal miniaturization and related, advanced technologies.
PB  - Belgrade : Materials Research Society of Serbia
C3  - Programme and The Book of abstracts / Twenty-first Annual Conference YUCOMAT 2019 & Eleventh World Round Table Conference on Sintering WRTCS 2019, Herceg Novi, Montenegro, September 2-6, 2019
T1  - The BaTiO3 nano-scale coated morphology influence on electronic properties and ceramics fractal nature frontiers
SP  - 40
EP  - 40
ER  - 
@conference{
author = "Mitić, Vojislav V. and Lazović, Goran and Lu, Chun-An and Paunović, Vesna and Veljković, Sandra and Fecht, Hans-Jörg and Vlahović, Branislav",
year = "2019",
url = "http://dais.sanu.ac.rs/123456789/6680",
abstract = "The BaTiO3 ceramics applications based on electronic properties have very high gradient scientific and industrial-technological interests. Our scientific research has been based on nano BaTiO3 with MOD-Y salts and also on Y2O3. The samples have been consolidated at sintering interval 1200–1350 °C. We demonstrate the new frontiers for different electronic properties between the layers of BaTiO3 grains. As a research target we had GB composite, Nano size metal oxide dispersions, ACDC safety capacitance, nano scale grain boundary control, capacitance, GB control mobility in DC BS operation voltage. We applied all related characterizations and especially SEM. Fractal nature characterization and corrections include influences grains and pores surface and Brownian motions of particles. We established relation with all of this characteristics and temperature. Throw this experiments and results and fractals characterization, we opened new perspectives for higher electronic properties integrations between the grains and practically established the control within the processing, morphological structures and designing the properties. This is very important, new approach towards further miniaturization-fractal miniaturization and related, advanced technologies.",
publisher = "Belgrade : Materials Research Society of Serbia",
journal = "Programme and The Book of abstracts / Twenty-first Annual Conference YUCOMAT 2019 & Eleventh World Round Table Conference on Sintering WRTCS 2019, Herceg Novi, Montenegro, September 2-6, 2019",
title = "The BaTiO3 nano-scale coated morphology influence on electronic properties and ceramics fractal nature frontiers",
pages = "40-40"
}
Mitić, V. V., Lazović, G., Lu, C., Paunović, V., Veljković, S., Fecht, H.,& Vlahović, B. (2019). The BaTiO3 nano-scale coated morphology influence on electronic properties and ceramics fractal nature frontiers.
Programme and The Book of abstracts / Twenty-first Annual Conference YUCOMAT 2019 & Eleventh World Round Table Conference on Sintering WRTCS 2019, Herceg Novi, Montenegro, September 2-6, 2019Belgrade : Materials Research Society of Serbia., null, 40-40. 
Mitić VV, Lazović G, Lu C, Paunović V, Veljković S, Fecht H, Vlahović B. The BaTiO3 nano-scale coated morphology influence on electronic properties and ceramics fractal nature frontiers. Programme and The Book of abstracts / Twenty-first Annual Conference YUCOMAT 2019 & Eleventh World Round Table Conference on Sintering WRTCS 2019, Herceg Novi, Montenegro, September 2-6, 2019. 2019;:40-40

Processing and properties of dense cordierite ceramics obtained through solid-state reaction and pressure-less sintering

Obradović, Nina; Pavlović, Vera P.; Kachlik, Martin; Maca, Karel; Olćan, Dragan; Đorđević, Antonije; Tshantshapanyan, Ani; Vlahović, Branislav; Pavlović, Vladimir B.

(Taylor and Francis, 2019)

TY  - JOUR
AU  - Obradović, Nina
AU  - Pavlović, Vera P.
AU  - Kachlik, Martin
AU  - Maca, Karel
AU  - Olćan, Dragan
AU  - Đorđević, Antonije
AU  - Tshantshapanyan, Ani
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/4557
AB  - Sintering of pure cordierite 2MgO:2Al2O3:5SiO2, and cordierite with the addition of 5 mass % TeO2 was studied. Green bodies were prepared from powder mixtures mechanically activated in a high-energy planetary mill, shaped by uniaxial (20 MPa) and cold isostatic pressing (1000 MPa). The pressure-less sintering of these specimens was performed at 1350°C for 1 h. High relative density over 95% of the theoretical value was obtained through solid-state reaction and pressure-less sintering of powder activated for 40 min, and for the first time reported in the literature. Phase composition and microstructures of sintered samples were determined by XRD and SEM, coupled with EDS mapping. The real part of the complex relative permittivity of the samples was measured at 200 MHz. The loss tangent of all samples was below the resolution of the measurement setup. A strong correlation between the relative permittivity and the density agrees with previously published data.
PB  - Taylor and Francis
T2  - Advances in Applied Ceramics
T1  - Processing and properties of dense cordierite ceramics obtained through solid-state reaction and pressure-less sintering
SP  - 241
EP  - 248
VL  - 118
IS  - 5
DO  - 10.1080/17436753.2018.1548150
ER  - 
@article{
author = "Obradović, Nina and Pavlović, Vera P. and Kachlik, Martin and Maca, Karel and Olćan, Dragan and Đorđević, Antonije and Tshantshapanyan, Ani and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2019",
url = "http://dais.sanu.ac.rs/123456789/4557",
abstract = "Sintering of pure cordierite 2MgO:2Al2O3:5SiO2, and cordierite with the addition of 5 mass % TeO2 was studied. Green bodies were prepared from powder mixtures mechanically activated in a high-energy planetary mill, shaped by uniaxial (20 MPa) and cold isostatic pressing (1000 MPa). The pressure-less sintering of these specimens was performed at 1350°C for 1 h. High relative density over 95% of the theoretical value was obtained through solid-state reaction and pressure-less sintering of powder activated for 40 min, and for the first time reported in the literature. Phase composition and microstructures of sintered samples were determined by XRD and SEM, coupled with EDS mapping. The real part of the complex relative permittivity of the samples was measured at 200 MHz. The loss tangent of all samples was below the resolution of the measurement setup. A strong correlation between the relative permittivity and the density agrees with previously published data.",
publisher = "Taylor and Francis",
journal = "Advances in Applied Ceramics",
title = "Processing and properties of dense cordierite ceramics obtained through solid-state reaction and pressure-less sintering",
pages = "241-248",
volume = "118",
number = "5",
doi = "10.1080/17436753.2018.1548150"
}
Obradović, N., Pavlović, V. P., Kachlik, M., Maca, K., Olćan, D., Đorđević, A., Tshantshapanyan, A., Vlahović, B.,& Pavlović, V. B. (2019). Processing and properties of dense cordierite ceramics obtained through solid-state reaction and pressure-less sintering.
Advances in Applied CeramicsTaylor and Francis., 118(5), 241-248. 
https://doi.org/10.1080/17436753.2018.1548150
Obradović N, Pavlović VP, Kachlik M, Maca K, Olćan D, Đorđević A, Tshantshapanyan A, Vlahović B, Pavlović VB. Processing and properties of dense cordierite ceramics obtained through solid-state reaction and pressure-less sintering. Advances in Applied Ceramics. 2019;118(5):241-248
3
3
3

Shungite – a carbon-mineral rock material: Its sinterability and possible applications

Obradović, Nina; Gigov, Mihajlo; Đorđević, Aleksandar; Kern, Frank; Dmitrović, S.; Matović, Branko; Ðorđević, Antonije; Tshantshapanyan, Ani; Vlahović, Branislav; Petrović, Predrag; Pavlović, Vladimir B.

(Novi Sad : Faculty of Technology, University of Novi Sad, 2019)

TY  - JOUR
AU  - Obradović, Nina
AU  - Gigov, Mihajlo
AU  - Đorđević, Aleksandar
AU  - Kern, Frank
AU  - Dmitrović, S.
AU  - Matović, Branko
AU  - Ðorđević, Antonije
AU  - Tshantshapanyan, Ani
AU  - Vlahović, Branislav
AU  - Petrović, Predrag
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/6372
AB  - The paper presents results of the influence of mechanical activation of shungite, a carbon-mineral rock material rich in silica and carbon, on its sintering behaviour, and obtaining of pure SiC ceramics. The mechanical activation of the starting powder was performed in a high-energy ball mill in time intervals from 30 to 480 min. The phase composition of the starting powders and sintered samples was analysed by the X-ray diffraction method. The first traces of SiC were detected after sintering at 1350 °C for 2 h in an Ar atmosphere, along with traces of unreacted SiO2. The scanning electron microscopy was performed in order to determine changes in the microstructure. Sintering was performed at various temperatures for 2 h, in an Ar atmosphere and a vacuum. Dielectric properties of the sintered samples were measured in the frequency range from 1 to 500 MHz. The obtained results indicate that the sintered powder is a good candidate for applications as an absorber of electromagnetic waves in microwave engineering. © 2019 University of Novi Sad, Faculty of Technology. All rights reserved.
PB  - Novi Sad : Faculty of Technology, University of Novi Sad
T2  - Processing and Application of Ceramics
T1  - Shungite – a carbon-mineral rock material: Its sinterability and possible applications
SP  - 89
EP  - 97
VL  - 13
IS  - 1
DO  - 10.2298/PAC1901089O
ER  - 
@article{
author = "Obradović, Nina and Gigov, Mihajlo and Đorđević, Aleksandar and Kern, Frank and Dmitrović, S. and Matović, Branko and Ðorđević, Antonije and Tshantshapanyan, Ani and Vlahović, Branislav and Petrović, Predrag and Pavlović, Vladimir B.",
year = "2019",
url = "http://dais.sanu.ac.rs/123456789/6372",
abstract = "The paper presents results of the influence of mechanical activation of shungite, a carbon-mineral rock material rich in silica and carbon, on its sintering behaviour, and obtaining of pure SiC ceramics. The mechanical activation of the starting powder was performed in a high-energy ball mill in time intervals from 30 to 480 min. The phase composition of the starting powders and sintered samples was analysed by the X-ray diffraction method. The first traces of SiC were detected after sintering at 1350 °C for 2 h in an Ar atmosphere, along with traces of unreacted SiO2. The scanning electron microscopy was performed in order to determine changes in the microstructure. Sintering was performed at various temperatures for 2 h, in an Ar atmosphere and a vacuum. Dielectric properties of the sintered samples were measured in the frequency range from 1 to 500 MHz. The obtained results indicate that the sintered powder is a good candidate for applications as an absorber of electromagnetic waves in microwave engineering. © 2019 University of Novi Sad, Faculty of Technology. All rights reserved.",
publisher = "Novi Sad : Faculty of Technology, University of Novi Sad",
journal = "Processing and Application of Ceramics",
title = "Shungite – a carbon-mineral rock material: Its sinterability and possible applications",
pages = "89-97",
volume = "13",
number = "1",
doi = "10.2298/PAC1901089O"
}
Obradović, N., Gigov, M., Đorđević, A., Kern, F., Dmitrović, S., Matović, B., Ðorđević, A., Tshantshapanyan, A., Vlahović, B., Petrović, P.,& Pavlović, V. B. (2019). Shungite – a carbon-mineral rock material: Its sinterability and possible applications.
Processing and Application of CeramicsNovi Sad : Faculty of Technology, University of Novi Sad., 13(1), 89-97. 
https://doi.org/10.2298/PAC1901089O
Obradović N, Gigov M, Đorđević A, Kern F, Dmitrović S, Matović B, Ðorđević A, Tshantshapanyan A, Vlahović B, Petrović P, Pavlović VB. Shungite – a carbon-mineral rock material: Its sinterability and possible applications. Processing and Application of Ceramics. 2019;13(1):89-97
2
2
3

Supplementary material for the article: Rusmirović, J.D., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V., Marinković, A.D., Pavlović, V.B., 2019. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. Environ Sci Pollut Res 26, 12379–12398. https://doi.org/10.1007/s11356-019-04625-0

Rusmirović, Jelena; Obradović, Nina; Perendija, Jovana; Umićević, Ana; Kapidžić, Ana; Vlahović, Branislav; Pavlović, Vera P.; Marinković, Aleksandar D.; Pavlović, Vladimir B.

(Springer, 2019)

TY  - BOOK
AU  - Rusmirović, Jelena
AU  - Obradović, Nina
AU  - Perendija, Jovana
AU  - Umićević, Ana
AU  - Kapidžić, Ana
AU  - Vlahović, Branislav
AU  - Pavlović, Vera P.
AU  - Marinković, Aleksandar D.
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/5805
PB  - Springer
T2  - Environmental Science and Pollution Research
T1  - Supplementary material for the article: Rusmirović, J.D., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V., Marinković, A.D., Pavlović, V.B., 2019. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. Environ Sci Pollut Res 26, 12379–12398. https://doi.org/10.1007/s11356-019-04625-0
ER  - 
@misc{
author = "Rusmirović, Jelena and Obradović, Nina and Perendija, Jovana and Umićević, Ana and Kapidžić, Ana and Vlahović, Branislav and Pavlović, Vera P. and Marinković, Aleksandar D. and Pavlović, Vladimir B.",
year = "2019",
url = "http://dais.sanu.ac.rs/123456789/5805",
publisher = "Springer",
journal = "Environmental Science and Pollution Research",
title = "Supplementary material for the article: Rusmirović, J.D., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V., Marinković, A.D., Pavlović, V.B., 2019. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. Environ Sci Pollut Res 26, 12379–12398. https://doi.org/10.1007/s11356-019-04625-0"
}
Rusmirović, J., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V. P., Marinković, A. D.,& Pavlović, V. B. (2019). Supplementary material for the article: Rusmirović, J.D., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V., Marinković, A.D., Pavlović, V.B., 2019. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. Environ Sci Pollut Res 26, 12379–12398. https://doi.org/10.1007/s11356-019-04625-0.
Environmental Science and Pollution ResearchSpringer., null. 
Rusmirović J, Obradović N, Perendija J, Umićević A, Kapidžić A, Vlahović B, Pavlović VP, Marinković AD, Pavlović VB. Supplementary material for the article: Rusmirović, J.D., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V., Marinković, A.D., Pavlović, V.B., 2019. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. Environ Sci Pollut Res 26, 12379–12398. https://doi.org/10.1007/s11356-019-04625-0. Environmental Science and Pollution Research. 2019;