Sort By
Publication Year
Deposit Date
Title
Type
Access
Publication Year
2011 (2)
2010 (1)
Version

Marković, R.

Link to this page

Authority KeyName Variants
916ef98b-1990-4661-9e96-062c63acf8a1
  • Marković, R. (3)
Projects

Author's Bibliography

Analyzing the corrosion characteristics of anodes used for the sulphur acidic waste water treatment

Marković, R.; Jugović, Branimir; Gvozdenović, Milica M.; Stevanović, Jasmina S.; Stevanović, Z.; Bugarin, Mile

(Tatranské Matliare : Slovak Society of Chemical Engineering, 2011)

TY  - CONF
AU  - Marković, R.
AU  - Jugović, Branimir
AU  - Gvozdenović, Milica M.
AU  - Stevanović, Jasmina S.
AU  - Stevanović, Z.
AU  - Bugarin, Mile
PY  - 2011
UR  - http://dais.sanu.ac.rs/123456789/551
AB  - This paper addresses on investigation the possibility of electrolytic treatment the sulphur acidic waste solution, obtained in the conventional electrolytic copper refining process. The copper anodes with non-standard nickel, lead, tin and antimony content were specially prepared for the refining process. Nickel content of all anodes was approximately 7.5 mass %, and the content of lead, tin and antimony was varied. It was observed, that anodes with O2 content lower than 200 ppm, were not passivated. Results, obtained using the standard electrochemical techniques, have indicated that the anodes with non-standard chemical composition could be used under the same conditions as well as in the conventional copper refining process.
PB  - Tatranské Matliare : Slovak Society of Chemical Engineering
C3  - Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering
T1  - Analyzing the corrosion characteristics of anodes used for the sulphur acidic waste water treatment
SP  - 972
EP  - 975
ER  - 
@conference{
author = "Marković, R. and Jugović, Branimir and Gvozdenović, Milica M. and Stevanović, Jasmina S. and Stevanović, Z. and Bugarin, Mile",
year = "2011",
url = "http://dais.sanu.ac.rs/123456789/551",
abstract = "This paper addresses on investigation the possibility of electrolytic treatment the sulphur acidic waste solution, obtained in the conventional electrolytic copper refining process. The copper anodes with non-standard nickel, lead, tin and antimony content were specially prepared for the refining process. Nickel content of all anodes was approximately 7.5 mass %, and the content of lead, tin and antimony was varied. It was observed, that anodes with O2 content lower than 200 ppm, were not passivated. Results, obtained using the standard electrochemical techniques, have indicated that the anodes with non-standard chemical composition could be used under the same conditions as well as in the conventional copper refining process.",
publisher = "Tatranské Matliare : Slovak Society of Chemical Engineering",
journal = "Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering",
title = "Analyzing the corrosion characteristics of anodes used for the sulphur acidic waste water treatment",
pages = "972-975"
}
Marković, R., Jugović, B., Gvozdenović, M. M., Stevanović, J. S., Stevanović, Z.,& Bugarin, M. (2011). Analyzing the corrosion characteristics of anodes used for the sulphur acidic waste water treatment.
Proceedings of the 38th International Conference of Slovak Society of Chemical EngineeringTatranské Matliare : Slovak Society of Chemical Engineering., null, 972-975. 
Marković R, Jugović B, Gvozdenović MM, Stevanović JS, Stevanović Z, Bugarin M. Analyzing the corrosion characteristics of anodes used for the sulphur acidic waste water treatment. Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering. 2011;:972-975

The use of anodic linear sweep voltammetery analysis (ALSV) for characterization the copper anodes used for sulphur acidic waste solution treatment

Marković, R.; Jugović, Branimir; Gvozdenović, Milica M.; Stevanović, Jasmina S.; Stevanović, Z.; Bugarin, Mile

(Tatranské Matliare : Slovak Society of Chemical Engineering, 2011)

TY  - CONF
AU  - Marković, R.
AU  - Jugović, Branimir
AU  - Gvozdenović, Milica M.
AU  - Stevanović, Jasmina S.
AU  - Stevanović, Z.
AU  - Bugarin, Mile
PY  - 2011
UR  - http://dais.sanu.ac.rs/123456789/550
AB  - This paper addresses on investigation the possibility of electrolytic treatment the sulphur acidic waste solution, obtained in the conventional electrolytic copper refining process. The copper anodes with non-standard nickel, lead, tin and antimony content were specially prepared for the refining process. Nickel content of all anodes was approximately 7.5 mass %, and the content of lead, tin and antimony was varied. Results, obtained using the standard electrochemical techniques, have indicated that the anodes could be used under the same conditions as well as in the conventional copper refining process.
PB  - Tatranské Matliare : Slovak Society of Chemical Engineering
C3  - Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering
T1  - The use of anodic linear sweep voltammetery analysis (ALSV) for characterization the copper anodes used for sulphur acidic waste solution treatment
SP  - 968
EP  - 971
ER  - 
@conference{
author = "Marković, R. and Jugović, Branimir and Gvozdenović, Milica M. and Stevanović, Jasmina S. and Stevanović, Z. and Bugarin, Mile",
year = "2011",
url = "http://dais.sanu.ac.rs/123456789/550",
abstract = "This paper addresses on investigation the possibility of electrolytic treatment the sulphur acidic waste solution, obtained in the conventional electrolytic copper refining process. The copper anodes with non-standard nickel, lead, tin and antimony content were specially prepared for the refining process. Nickel content of all anodes was approximately 7.5 mass %, and the content of lead, tin and antimony was varied. Results, obtained using the standard electrochemical techniques, have indicated that the anodes could be used under the same conditions as well as in the conventional copper refining process.",
publisher = "Tatranské Matliare : Slovak Society of Chemical Engineering",
journal = "Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering",
title = "The use of anodic linear sweep voltammetery analysis (ALSV) for characterization the copper anodes used for sulphur acidic waste solution treatment",
pages = "968-971"
}
Marković, R., Jugović, B., Gvozdenović, M. M., Stevanović, J. S., Stevanović, Z.,& Bugarin, M. (2011). The use of anodic linear sweep voltammetery analysis (ALSV) for characterization the copper anodes used for sulphur acidic waste solution treatment.
Proceedings of the 38th International Conference of Slovak Society of Chemical EngineeringTatranské Matliare : Slovak Society of Chemical Engineering., null, 968-971. 
Marković R, Jugović B, Gvozdenović MM, Stevanović JS, Stevanović Z, Bugarin M. The use of anodic linear sweep voltammetery analysis (ALSV) for characterization the copper anodes used for sulphur acidic waste solution treatment. Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering. 2011;:968-971

Behaviour of non-standard composition copper bearing anodes from the copper refining process

Marković, R.; Friedrich, B.; Stajić Trošić, Jasna; Jordović, Branka; Jugović, Branimir; Gvozdenović, Milica M.; Stevanović, Jasmina S.

(Elsevier Science Bv, Amsterdam, 2010)

TY  - JOUR
AU  - Marković, R.
AU  - Friedrich, B.
AU  - Stajić Trošić, Jasna
AU  - Jordović, Branka
AU  - Jugović, Branimir
AU  - Gvozdenović, Milica M.
AU  - Stevanović, Jasmina S.
PY  - 2010
UR  - http://dais.sanu.ac.rs/123456789/4844
AB  - This paper addresses on investigation the possibility of electrolytic treatment the sulphur acidic waste solution, obtained in the conventional electrolytic copper refining process. Beside the high copper concentration, the high concentration of other metals, in this case nickel, is the main characteristic of these waste solutions. Due to this fact, the copper bearing anodes with non-standard nickel, lead, tin and antimony content were specially prepared for the refining process. Nickel content of all anodes was approximately 7.5 mass%, and the content of lead, tin and antimony was varied. The preliminary results, obtained using the standard electrochemical techniques, have indicated that the copper bearing anodes could be used under the same conditions as well as in the conventional copper refining process. The measurements in constant galvanostatic pulse have pointed out that the all chemical elements from copper bearing anodes were dissolved and only copper was deposited onto the cathode. It was also pointed out that Ni concentration in the base working electrolyte (sulphur acidic waste solution), after 72 h of process, increased to 102 mass% at T-1 = 63 +/- 2 degrees C and up to 122 mass% at T-1 = 73 +/- 2 degrees C, while arsenic concentration decreased to a minimum value.
PB  - Elsevier Science Bv, Amsterdam
T2  - Journal of Hazardous Materials
T1  - Behaviour of non-standard composition copper bearing anodes from the copper refining process
SP  - 55
EP  - 63
VL  - 182
IS  - 1-3
DO  - 10.1016/j.jhazmat.2010.05.137
ER  - 
@article{
author = "Marković, R. and Friedrich, B. and Stajić Trošić, Jasna and Jordović, Branka and Jugović, Branimir and Gvozdenović, Milica M. and Stevanović, Jasmina S.",
year = "2010",
url = "http://dais.sanu.ac.rs/123456789/4844",
abstract = "This paper addresses on investigation the possibility of electrolytic treatment the sulphur acidic waste solution, obtained in the conventional electrolytic copper refining process. Beside the high copper concentration, the high concentration of other metals, in this case nickel, is the main characteristic of these waste solutions. Due to this fact, the copper bearing anodes with non-standard nickel, lead, tin and antimony content were specially prepared for the refining process. Nickel content of all anodes was approximately 7.5 mass%, and the content of lead, tin and antimony was varied. The preliminary results, obtained using the standard electrochemical techniques, have indicated that the copper bearing anodes could be used under the same conditions as well as in the conventional copper refining process. The measurements in constant galvanostatic pulse have pointed out that the all chemical elements from copper bearing anodes were dissolved and only copper was deposited onto the cathode. It was also pointed out that Ni concentration in the base working electrolyte (sulphur acidic waste solution), after 72 h of process, increased to 102 mass% at T-1 = 63 +/- 2 degrees C and up to 122 mass% at T-1 = 73 +/- 2 degrees C, while arsenic concentration decreased to a minimum value.",
publisher = "Elsevier Science Bv, Amsterdam",
journal = "Journal of Hazardous Materials",
title = "Behaviour of non-standard composition copper bearing anodes from the copper refining process",
pages = "55-63",
volume = "182",
number = "1-3",
doi = "10.1016/j.jhazmat.2010.05.137"
}
Marković, R., Friedrich, B., Stajić Trošić, J., Jordović, B., Jugović, B., Gvozdenović, M. M.,& Stevanović, J. S. (2010). Behaviour of non-standard composition copper bearing anodes from the copper refining process.
Journal of Hazardous MaterialsElsevier Science Bv, Amsterdam., 182(1-3), 55-63. 
https://doi.org/10.1016/j.jhazmat.2010.05.137
Marković R, Friedrich B, Stajić Trošić J, Jordović B, Jugović B, Gvozdenović MM, Stevanović JS. Behaviour of non-standard composition copper bearing anodes from the copper refining process. Journal of Hazardous Materials. 2010;182(1-3):55-63
3
3
3