Sort By
Publication Year
Deposit Date
Title
Type
Access
Publication Year
2020 (1)
2019 (5)
2018 (1)
2015 (1)
Version

Nenadović, Snežana S.

Link to this page

Authority KeyName Variants
81ffed35-0c31-4ed3-bfb9-558ec443ce07
  • Nenadović, Snežana S. (8)

Author's Bibliography

Study of Nanosized Hydroxyapatite Material Annealing at Different Retention Times

Miljković, Miljana; Kljajević, Ljiljana; Filipović, Suzana; Pavlović, Vladimir B.; Nenadović, Snežana S.

(Belgrade : ETRAN, 2020)

TY  - JOUR
AU  - Miljković, Miljana
AU  - Kljajević, Ljiljana
AU  - Filipović, Suzana
AU  - Pavlović, Vladimir B.
AU  - Nenadović, Snežana S.
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/10041
AB  - The aim of the study was to investigate the influence of low heating temperatures with two different retention times to optimize the process for obtaining nanosized hydroxyapatite material that can possibly be used in the fields of biology and pharmacy. Nanosized hydroxyapatite was successfully obtained by wet chemical precipitation. The annealing of the material performed at 300 oC with two different retention times i.e. 3 and 6 hours in air atmosphere. Low annealing temperature with extended retention time was selected in terms to reduce energy consumption. FTIR spectroscopy was used to confirm characteristic vibrational bands of hydroxyapatite samples, and presence of carbonate bands of hydroxyapatite annealed for 3h and 6h. X-Ray powder diffraction analysis were used to examine phase composition, determine the size of unit cells and crystallite sizes, and SEMEDS methods were used to obtain particle size and arrangement also grain growth morphology and confirmed the presence of calcium, phosphorous oxygen and carbonate peaks. The results show that different retention time has influence on particle growth as well as unit cell parameters and crystallite sizes changes of hydroxyapatite material.
PB  - Belgrade : ETRAN
T2  - Science of Sintering
T1  - Study of Nanosized Hydroxyapatite Material Annealing at Different Retention Times
SP  - 405
EP  - 413
VL  - 52
IS  - 4
DO  - 10.2298/SOS2004405M
ER  - 
@article{
author = "Miljković, Miljana and Kljajević, Ljiljana and Filipović, Suzana and Pavlović, Vladimir B. and Nenadović, Snežana S.",
year = "2020",
url = "https://dais.sanu.ac.rs/123456789/10041",
abstract = "The aim of the study was to investigate the influence of low heating temperatures with two different retention times to optimize the process for obtaining nanosized hydroxyapatite material that can possibly be used in the fields of biology and pharmacy. Nanosized hydroxyapatite was successfully obtained by wet chemical precipitation. The annealing of the material performed at 300 oC with two different retention times i.e. 3 and 6 hours in air atmosphere. Low annealing temperature with extended retention time was selected in terms to reduce energy consumption. FTIR spectroscopy was used to confirm characteristic vibrational bands of hydroxyapatite samples, and presence of carbonate bands of hydroxyapatite annealed for 3h and 6h. X-Ray powder diffraction analysis were used to examine phase composition, determine the size of unit cells and crystallite sizes, and SEMEDS methods were used to obtain particle size and arrangement also grain growth morphology and confirmed the presence of calcium, phosphorous oxygen and carbonate peaks. The results show that different retention time has influence on particle growth as well as unit cell parameters and crystallite sizes changes of hydroxyapatite material.",
publisher = "Belgrade : ETRAN",
journal = "Science of Sintering",
title = "Study of Nanosized Hydroxyapatite Material Annealing at Different Retention Times",
pages = "405-413",
volume = "52",
number = "4",
doi = "10.2298/SOS2004405M"
}
Miljković, M., Kljajević, L., Filipović, S., Pavlović, V. B.,& Nenadović, S. S. (2020). Study of Nanosized Hydroxyapatite Material Annealing at Different Retention Times.
Science of SinteringBelgrade : ETRAN., 52(4), 405-413. 
https://doi.org/10.2298/SOS2004405M
Miljković M, Kljajević L, Filipović S, Pavlović VB, Nenadović SS. Study of Nanosized Hydroxyapatite Material Annealing at Different Retention Times. Science of Sintering. 2020;52(4):405-413

Structural and electrical properties of geopolymer materials based on different precursors (kaolin, bentonite and diatomite)

Kljajević, Ljiljana M.; Melichova, Zuzana; Stojmenović, Marija; Todorović, Bratislav Ž; Pavlović, Vladimir B.; Čitaković, Nada; Nenadović, Snežana S.

(Skopje : Institute of Chemistry, Faculty of Natural Sciences and Mathematics, Ss. Cyril & Methodius University, 2019)

TY  - JOUR
AU  - Kljajević, Ljiljana M.
AU  - Melichova, Zuzana
AU  - Stojmenović, Marija
AU  - Todorović, Bratislav Ž
AU  - Pavlović, Vladimir B.
AU  - Čitaković, Nada
AU  - Nenadović, Snežana S.
PY  - 2019
UR  - https://mjcce.org.mk/index.php/MJCCE/article/view/1678
UR  - http://dais.sanu.ac.rs/123456789/7042
AB  - Geopolymers (GP) were successfully synthesized from metabentonite (MB), metadiatomite (MD) and metakaolinite (MK). Characterization of their phase structure and microstructure was performed by XRD, FTIR, SEM/EDX methods. A SEM micrograph of GPMD shows a homogeneous surface with some longitudinal cavities in the gel, and it is significantly different from the micrographs of the other two geopolymer samples, GPMB and GPMK. A considerable amount of unreacted particles, as well as the presence of pores in the geopolymer matrix of GPMK and GPMD, indicate an incomplete reaction in the system. Aluminosilicate inorganic polymers, geopolymers, are quasi solid electrolytes which possess a high electrical conductivity at room temperature in relation to materials of similar chemical composition. The highest conductivity was found for the sample obtained from GPMK, amounting to 2.14 × 10–2 Ω–1cm–1at 700 ºC. The corresponding activation energies of conductivity for this sample amounted to 0.33 eV in the temperature range of 500–700 ºC. The geopolymer synthesized from metakaolin has good ionic conductivity values, which recommends it for use as an alternative material for an SOFC (Solid Oxide Fuel Cell).
PB  - Skopje : Institute of Chemistry, Faculty of Natural Sciences and Mathematics, Ss. Cyril & Methodius University
T2  - Macedonian Journal of Chemistry and Chemical Engineering
T1  - Structural and electrical properties of geopolymer materials based on different precursors (kaolin, bentonite and diatomite)
SP  - 283
EP  - 292
VL  - 38
IS  - 2
DO  - 10.20450/mjcce.2019.1678
ER  - 
@article{
author = "Kljajević, Ljiljana M. and Melichova, Zuzana and Stojmenović, Marija and Todorović, Bratislav Ž and Pavlović, Vladimir B. and Čitaković, Nada and Nenadović, Snežana S.",
year = "2019",
url = "https://mjcce.org.mk/index.php/MJCCE/article/view/1678, http://dais.sanu.ac.rs/123456789/7042",
abstract = "Geopolymers (GP) were successfully synthesized from metabentonite (MB), metadiatomite (MD) and metakaolinite (MK). Characterization of their phase structure and microstructure was performed by XRD, FTIR, SEM/EDX methods. A SEM micrograph of GPMD shows a homogeneous surface with some longitudinal cavities in the gel, and it is significantly different from the micrographs of the other two geopolymer samples, GPMB and GPMK. A considerable amount of unreacted particles, as well as the presence of pores in the geopolymer matrix of GPMK and GPMD, indicate an incomplete reaction in the system. Aluminosilicate inorganic polymers, geopolymers, are quasi solid electrolytes which possess a high electrical conductivity at room temperature in relation to materials of similar chemical composition. The highest conductivity was found for the sample obtained from GPMK, amounting to 2.14 × 10–2 Ω–1cm–1at 700 ºC. The corresponding activation energies of conductivity for this sample amounted to 0.33 eV in the temperature range of 500–700 ºC. The geopolymer synthesized from metakaolin has good ionic conductivity values, which recommends it for use as an alternative material for an SOFC (Solid Oxide Fuel Cell).",
publisher = "Skopje : Institute of Chemistry, Faculty of Natural Sciences and Mathematics, Ss. Cyril & Methodius University",
journal = "Macedonian Journal of Chemistry and Chemical Engineering",
title = "Structural and electrical properties of geopolymer materials based on different precursors (kaolin, bentonite and diatomite)",
pages = "283-292",
volume = "38",
number = "2",
doi = "10.20450/mjcce.2019.1678"
}
Kljajević, L. M., Melichova, Z., Stojmenović, M., Todorović, B. Ž., Pavlović, V. B., Čitaković, N.,& Nenadović, S. S. (2019). Structural and electrical properties of geopolymer materials based on different precursors (kaolin, bentonite and diatomite).
Macedonian Journal of Chemistry and Chemical EngineeringSkopje : Institute of Chemistry, Faculty of Natural Sciences and Mathematics, Ss. Cyril & Methodius University., 38(2), 283-292. 
https://doi.org/10.20450/mjcce.2019.1678
Kljajević LM, Melichova Z, Stojmenović M, Todorović BŽ, Pavlović VB, Čitaković N, Nenadović SS. Structural and electrical properties of geopolymer materials based on different precursors (kaolin, bentonite and diatomite). Macedonian Journal of Chemistry and Chemical Engineering. 2019;38(2):283-292
1
1
1

The influence of alumino-silicate matrix composition on surface hydrophobic properties

Kljajević, Ljiljana M.; Melichova, Zuzana; Kisić, Danilo D.; Nenadović, Miloš T.; Todorović, Bratislav Ž; Pavlović, Vladimir B.; Nenadović, Snežana S.

(Belgrade : ETRAN, 2019)

TY  - JOUR
AU  - Kljajević, Ljiljana M.
AU  - Melichova, Zuzana
AU  - Kisić, Danilo D.
AU  - Nenadović, Miloš T.
AU  - Todorović, Bratislav Ž
AU  - Pavlović, Vladimir B.
AU  - Nenadović, Snežana S.
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/6466
AB  - The purpose of this investigation is to investigate the hydrophobicity of geopolymers, new alumino-silicate materials and the influence of Si/Al ratio on their surface properties. Contact angle measurement (CAM) as reliable indicator of hydrophobicity was determined for synthesized geopolymers using water and ethylene-glycol as reference liquids. Geopolymers were synthesized from various precursors: kaolin, bentonite and diatomite. Characterization of phase structure and microstructure was performed by XRD, FTIR, SEM/EDX methods. Contact angle measurements confirmed that the geopolymers synthesized from metakaolin are the most porous, which can be explained by the smallest Si/Al ratio. The maximum value of contact angle and free surface energy (110.2 mJ/m2) has been achieved for geopolymer synthesized by diatoms (GPMD). SEM micrograph of GPMD shows a homogeneous surface with some longitudinal cavities in the gel and is significantly different from the micrographs of other two geopolymer samples, GPMB and GPMK.
PB  - Belgrade : ETRAN
T2  - Science of Sintering
T1  - The influence of alumino-silicate matrix composition on surface hydrophobic properties
SP  - 163
EP  - 173
VL  - 51
IS  - 2
DO  - 10.2298/SOS1902163K
ER  - 
@article{
author = "Kljajević, Ljiljana M. and Melichova, Zuzana and Kisić, Danilo D. and Nenadović, Miloš T. and Todorović, Bratislav Ž and Pavlović, Vladimir B. and Nenadović, Snežana S.",
year = "2019",
url = "http://dais.sanu.ac.rs/123456789/6466",
abstract = "The purpose of this investigation is to investigate the hydrophobicity of geopolymers, new alumino-silicate materials and the influence of Si/Al ratio on their surface properties. Contact angle measurement (CAM) as reliable indicator of hydrophobicity was determined for synthesized geopolymers using water and ethylene-glycol as reference liquids. Geopolymers were synthesized from various precursors: kaolin, bentonite and diatomite. Characterization of phase structure and microstructure was performed by XRD, FTIR, SEM/EDX methods. Contact angle measurements confirmed that the geopolymers synthesized from metakaolin are the most porous, which can be explained by the smallest Si/Al ratio. The maximum value of contact angle and free surface energy (110.2 mJ/m2) has been achieved for geopolymer synthesized by diatoms (GPMD). SEM micrograph of GPMD shows a homogeneous surface with some longitudinal cavities in the gel and is significantly different from the micrographs of other two geopolymer samples, GPMB and GPMK.",
publisher = "Belgrade : ETRAN",
journal = "Science of Sintering",
title = "The influence of alumino-silicate matrix composition on surface hydrophobic properties",
pages = "163-173",
volume = "51",
number = "2",
doi = "10.2298/SOS1902163K"
}
Kljajević, L. M., Melichova, Z., Kisić, D. D., Nenadović, M. T., Todorović, B. Ž., Pavlović, V. B.,& Nenadović, S. S. (2019). The influence of alumino-silicate matrix composition on surface hydrophobic properties.
Science of SinteringBelgrade : ETRAN., 51(2), 163-173. 
https://doi.org/10.2298/SOS1902163K
Kljajević LM, Melichova Z, Kisić DD, Nenadović MT, Todorović BŽ, Pavlović VB, Nenadović SS. The influence of alumino-silicate matrix composition on surface hydrophobic properties. Science of Sintering. 2019;51(2):163-173
2
4
1

The potential of hybrid geopolymer composites

Vukčević, Mira; Bošković, Ivana; Nenadović, Snežana S.; Mirković, Miljana M.; Gulicovski, Jelena; Pavlović, Vladimir B.; Kljajević, Ljiljana M.

(Belgrade : Institute for Multidisciplinary Research, 2019)

TY  - CONF
AU  - Vukčević, Mira
AU  - Bošković, Ivana
AU  - Nenadović, Snežana S.
AU  - Mirković, Miljana M.
AU  - Gulicovski, Jelena
AU  - Pavlović, Vladimir B.
AU  - Kljajević, Ljiljana M.
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/7004
AB  - Hybrid geopolymers represent a new class of composite materials formed by incorporating organic polymer into a geopolymer matrix. The properties of hybrid geopolymer depend on the addition of organic phase and the starting raw material composition (concentration of NaOH in alkaline activator, Si/Al mass ratio and solid/liquid mass ratio). In addition to these relevant parameters, this paper examines the synthesis conditions of these materials through the influence of the type, amount and manner of adding organic modifiers (commercial epoxy resins and 3- (methoxyl) propyl methacrylates) on forming the structure with significantly reduced pore distribution and decreased pore size, which exhibits good mechanical properties. The purpose of this research is to define the optimal conditions of the hybrid geopolymers' synthesis through the examination of relevant parameters. Expected improvement of mechanical properties was confirmed through values of compressive stength. Characterization of hybrid geopolymer composities was performed by XRD analysis, DRIFT spectroscopy and SEM analysis.
PB  - Belgrade : Institute for Multidisciplinary Research
C3  - Programme and the Book of Abstracts / 5th Conference of The Serbian Society for Ceramic Materials, 5CSCS-2019, June 11-13, 2019, Belgrade, Serbia
T1  - The potential of hybrid geopolymer composites
SP  - 71
EP  - 71
ER  - 
@conference{
author = "Vukčević, Mira and Bošković, Ivana and Nenadović, Snežana S. and Mirković, Miljana M. and Gulicovski, Jelena and Pavlović, Vladimir B. and Kljajević, Ljiljana M.",
year = "2019",
url = "http://dais.sanu.ac.rs/123456789/7004",
abstract = "Hybrid geopolymers represent a new class of composite materials formed by incorporating organic polymer into a geopolymer matrix. The properties of hybrid geopolymer depend on the addition of organic phase and the starting raw material composition (concentration of NaOH in alkaline activator, Si/Al mass ratio and solid/liquid mass ratio). In addition to these relevant parameters, this paper examines the synthesis conditions of these materials through the influence of the type, amount and manner of adding organic modifiers (commercial epoxy resins and 3- (methoxyl) propyl methacrylates) on forming the structure with significantly reduced pore distribution and decreased pore size, which exhibits good mechanical properties. The purpose of this research is to define the optimal conditions of the hybrid geopolymers' synthesis through the examination of relevant parameters. Expected improvement of mechanical properties was confirmed through values of compressive stength. Characterization of hybrid geopolymer composities was performed by XRD analysis, DRIFT spectroscopy and SEM analysis.",
publisher = "Belgrade : Institute for Multidisciplinary Research",
journal = "Programme and the Book of Abstracts / 5th Conference of The Serbian Society for Ceramic Materials, 5CSCS-2019, June 11-13, 2019, Belgrade, Serbia",
title = "The potential of hybrid geopolymer composites",
pages = "71-71"
}
Vukčević, M., Bošković, I., Nenadović, S. S., Mirković, M. M., Gulicovski, J., Pavlović, V. B.,& Kljajević, L. M. (2019). The potential of hybrid geopolymer composites.
Programme and the Book of Abstracts / 5th Conference of The Serbian Society for Ceramic Materials, 5CSCS-2019, June 11-13, 2019, Belgrade, SerbiaBelgrade : Institute for Multidisciplinary Research., null, 71-71. 
Vukčević M, Bošković I, Nenadović SS, Mirković MM, Gulicovski J, Pavlović VB, Kljajević LM. The potential of hybrid geopolymer composites. Programme and the Book of Abstracts / 5th Conference of The Serbian Society for Ceramic Materials, 5CSCS-2019, June 11-13, 2019, Belgrade, Serbia. 2019;:71-71

Synthesis and characterization of Brushite-metakaolin-based geopolymer materials

Đukić, Dunja; Nenadović, Snežana S.; Kljajević, Ljiljana M.; Pavlović, Vladimir B.; Ivanović, Marija D.; Nenadović, Miloš T.; Mirković, Miljana M.

(Belgrade : Institute of Technical Sciences of SASA, 2019)

TY  - CONF
AU  - Đukić, Dunja
AU  - Nenadović, Snežana S.
AU  - Kljajević, Ljiljana M.
AU  - Pavlović, Vladimir B.
AU  - Ivanović, Marija D.
AU  - Nenadović, Miloš T.
AU  - Mirković, Miljana M.
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/6964
AB  - In a field of green chemistry, environmental protection and ecological conservation of the environment there are ways to come up with new and more advanced materials using on the one hand natural, recyceled or waste materials and on the other hand syntethic materials obtained by using green chemistry synthesis procedures. The aim of this paper was to synthesize and characterize Brushite-metakaolin-based geopolymer materials and to examine the possibility of using these materials in the fields of construction, cement industry, as well as in environmental protection as potential adsorbents. Initial materials which were used for geopolymer synthesis was Brushite (CaHPO4·2H2O) which was obtained by solutionprecipitation reaction form acetate solutions and Kaolinite clay from Rudovci deposit (Serbia). The obtained mixture powders were dissolved in a strong alcaline solution with addiction of water glass. Produced geopolymers was cast into mods and preserved for 28 days. The starting materials and the synthesized Brushite-metakaolin-based geopolymer material were examined using XRPD, FTIR SEM-EDS methods. The contact angle measurements were made to test hydrophilic and wettable properties of synthesized material.
PB  - Belgrade : Institute of Technical Sciences of SASA
C3  - Program and the Book of abstracts / Eighteenth Young Researchers' Conference Materials Sciences and Engineering, December 4-6, 2019, Belgrade, Serbia
T1  - Synthesis and characterization of Brushite-metakaolin-based geopolymer materials
SP  - 86
EP  - 86
ER  - 
@conference{
author = "Đukić, Dunja and Nenadović, Snežana S. and Kljajević, Ljiljana M. and Pavlović, Vladimir B. and Ivanović, Marija D. and Nenadović, Miloš T. and Mirković, Miljana M.",
year = "2019",
url = "http://dais.sanu.ac.rs/123456789/6964",
abstract = "In a field of green chemistry, environmental protection and ecological conservation of the environment there are ways to come up with new and more advanced materials using on the one hand natural, recyceled or waste materials and on the other hand syntethic materials obtained by using green chemistry synthesis procedures. The aim of this paper was to synthesize and characterize Brushite-metakaolin-based geopolymer materials and to examine the possibility of using these materials in the fields of construction, cement industry, as well as in environmental protection as potential adsorbents. Initial materials which were used for geopolymer synthesis was Brushite (CaHPO4·2H2O) which was obtained by solutionprecipitation reaction form acetate solutions and Kaolinite clay from Rudovci deposit (Serbia). The obtained mixture powders were dissolved in a strong alcaline solution with addiction of water glass. Produced geopolymers was cast into mods and preserved for 28 days. The starting materials and the synthesized Brushite-metakaolin-based geopolymer material were examined using XRPD, FTIR SEM-EDS methods. The contact angle measurements were made to test hydrophilic and wettable properties of synthesized material.",
publisher = "Belgrade : Institute of Technical Sciences of SASA",
journal = "Program and the Book of abstracts / Eighteenth Young Researchers' Conference Materials Sciences and Engineering, December 4-6, 2019, Belgrade, Serbia",
title = "Synthesis and characterization of Brushite-metakaolin-based geopolymer materials",
pages = "86-86"
}
Đukić, D., Nenadović, S. S., Kljajević, L. M., Pavlović, V. B., Ivanović, M. D., Nenadović, M. T.,& Mirković, M. M. (2019). Synthesis and characterization of Brushite-metakaolin-based geopolymer materials.
Program and the Book of abstracts / Eighteenth Young Researchers' Conference Materials Sciences and Engineering, December 4-6, 2019, Belgrade, SerbiaBelgrade : Institute of Technical Sciences of SASA., null, 86-86. 
Đukić D, Nenadović SS, Kljajević LM, Pavlović VB, Ivanović MD, Nenadović MT, Mirković MM. Synthesis and characterization of Brushite-metakaolin-based geopolymer materials. Program and the Book of abstracts / Eighteenth Young Researchers' Conference Materials Sciences and Engineering, December 4-6, 2019, Belgrade, Serbia. 2019;:86-86

The influence of thermodynamic parameters of the alkaline activator on the mechanical properties of geopolymers

Ivanović, Marija D.; Đukić, Dunja; Mladenović, Nataša; Kljajević, Ljiljana M.; Pavlović, Vladimir B.; Nenadović, Snežana S.; Mirković, Miljana M.

(Belgrade : Institute of Technical Sciences of SASA, 2019)

TY  - CONF
AU  - Ivanović, Marija D.
AU  - Đukić, Dunja
AU  - Mladenović, Nataša
AU  - Kljajević, Ljiljana M.
AU  - Pavlović, Vladimir B.
AU  - Nenadović, Snežana S.
AU  - Mirković, Miljana M.
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/6965
AB  - In order to optimize process of geopolymerization, the investigation of thermodynamic parameters of alkali activators are important. The aim of this research was to investigate the influence of thermodynamic parameters (density, viscosity, refractive index and sound velocity) of alkaline activators on mechanical properties (compressive strength and hardness) of synthesized geopolymer samples. Geopolymers were synthetized by alkaline activation of metakaolin, having the density 2.524 g/cm3, using the activators at elevated temperature of 60 oC for two days. Based on the obtained results thermodynamic properties has been selected to predict the properties of materials. Four series of alkaline activators have been used. Activators remarked as AA1, AA2, AA3 and AA4 present the mixtures of Na2SiO3 and solutions of NaOH, of different molarities 2M, 4M, 6M and 8M respectively. The volume ratio of Na2SiO3 and aqueous solution of NaOH was the same for all samples. Densities, viscosities and refractive indices of alkaline activators were determined over the temperature range 15-60 oC of process of geopolymerizations. The values of density, viscosity and refractive index decrease with temperature increase over the investigated temperature range. Increasing molarity of alkali activator solutions, the sound velocity of activators is changed. For sample AA2 the values of sound velocity rises from room temperature to 45 °C and then begins to decrease while for the sample AA3 sound velocity grows until 30 °C and then starts to decrease with further increasing of temperature. Four series of geopolymer samples GP1 to GP4 were synthesiyed using the constant ratio of solid and liquid phase. FTIR, XRD, SEM-EDS methods were used for physicochemical further characterization of geopolymer samples.
PB  - Belgrade : Institute of Technical Sciences of SASA
C3  - Program and the Book of abstracts / Eighteenth Young Researchers' Conference Materials Sciences and Engineering, December 4-6, 2019, Belgrade, Serbia
T1  - The influence of thermodynamic parameters of the alkaline activator on the mechanical properties of geopolymers
SP  - 87
EP  - 87
ER  - 
@conference{
author = "Ivanović, Marija D. and Đukić, Dunja and Mladenović, Nataša and Kljajević, Ljiljana M. and Pavlović, Vladimir B. and Nenadović, Snežana S. and Mirković, Miljana M.",
year = "2019",
url = "http://dais.sanu.ac.rs/123456789/6965",
abstract = "In order to optimize process of geopolymerization, the investigation of thermodynamic parameters of alkali activators are important. The aim of this research was to investigate the influence of thermodynamic parameters (density, viscosity, refractive index and sound velocity) of alkaline activators on mechanical properties (compressive strength and hardness) of synthesized geopolymer samples. Geopolymers were synthetized by alkaline activation of metakaolin, having the density 2.524 g/cm3, using the activators at elevated temperature of 60 oC for two days. Based on the obtained results thermodynamic properties has been selected to predict the properties of materials. Four series of alkaline activators have been used. Activators remarked as AA1, AA2, AA3 and AA4 present the mixtures of Na2SiO3 and solutions of NaOH, of different molarities 2M, 4M, 6M and 8M respectively. The volume ratio of Na2SiO3 and aqueous solution of NaOH was the same for all samples. Densities, viscosities and refractive indices of alkaline activators were determined over the temperature range 15-60 oC of process of geopolymerizations. The values of density, viscosity and refractive index decrease with temperature increase over the investigated temperature range. Increasing molarity of alkali activator solutions, the sound velocity of activators is changed. For sample AA2 the values of sound velocity rises from room temperature to 45 °C and then begins to decrease while for the sample AA3 sound velocity grows until 30 °C and then starts to decrease with further increasing of temperature. Four series of geopolymer samples GP1 to GP4 were synthesiyed using the constant ratio of solid and liquid phase. FTIR, XRD, SEM-EDS methods were used for physicochemical further characterization of geopolymer samples.",
publisher = "Belgrade : Institute of Technical Sciences of SASA",
journal = "Program and the Book of abstracts / Eighteenth Young Researchers' Conference Materials Sciences and Engineering, December 4-6, 2019, Belgrade, Serbia",
title = "The influence of thermodynamic parameters of the alkaline activator on the mechanical properties of geopolymers",
pages = "87-87"
}
Ivanović, M. D., Đukić, D., Mladenović, N., Kljajević, L. M., Pavlović, V. B., Nenadović, S. S.,& Mirković, M. M. (2019). The influence of thermodynamic parameters of the alkaline activator on the mechanical properties of geopolymers.
Program and the Book of abstracts / Eighteenth Young Researchers' Conference Materials Sciences and Engineering, December 4-6, 2019, Belgrade, SerbiaBelgrade : Institute of Technical Sciences of SASA., null, 87-87. 
Ivanović MD, Đukić D, Mladenović N, Kljajević LM, Pavlović VB, Nenadović SS, Mirković MM. The influence of thermodynamic parameters of the alkaline activator on the mechanical properties of geopolymers. Program and the Book of abstracts / Eighteenth Young Researchers' Conference Materials Sciences and Engineering, December 4-6, 2019, Belgrade, Serbia. 2019;:87-87

Effect of Alkaline Activator Properties on Structure of Metakaolin-Based Geopolymer Samples

Ivanović, Marija; Mladenović, Nataša; Gulicovski, Jelena; Pavlović, Vladimir B.; Pavlović, Vera P.; Kljajević, Ljiljana M.; Nenadović, Snežana S.

(Belgrade : Serbian Ceramic Society, 2018)

TY  - CONF
AU  - Ivanović, Marija
AU  - Mladenović, Nataša
AU  - Gulicovski, Jelena
AU  - Pavlović, Vladimir B.
AU  - Pavlović, Vera P.
AU  - Kljajević, Ljiljana M.
AU  - Nenadović, Snežana S.
PY  - 2018
UR  - http://dais.sanu.ac.rs/123456789/4116
AB  - Considering geopolymers as inorganic polymers, they are actually amorphous network of interlinked silicate and aluminate groups, so they could be prospective ceramic precursors for materials with defined dimensions obtained by casting and firing, but not from powder processing. In this research, the starting material is metakaolin, which was obtained by calcining domes tic kaolinite clay. Initially, four series of alkaline activators of NaOH and sodium silicate have been used. Activators present the mixtures of Na2SiO3 and solutions of NaOH, of different molarities 2M, 4M, 6M and 8M. The prepared geopolymer slurries were cast into the designated near shape at room temperature and after that at 60oC. In fact, the post-synthesis curing process (28 days) has an important role in the obtaining good characteristics of geopolymers. Densities, viscosities and refractive index of alkaline activators were determined over the temperature range 15-60oC of process of geopolymerizations. Based on the obtained results of investigated parameters have been selected to predict the properties of materials. All geopolymer samples were characterized by XRD, FTIR, SEM/EDS analysis and Raman spectroscopy providing complementary and valuable information of the investigated materials. This route of ceramics production has advantages associated with producing an environmental friendly, energy saving, clean new technology of geopolymer materials.
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018
T1  - Effect of Alkaline Activator Properties on Structure of Metakaolin-Based Geopolymer Samples
SP  - 73
EP  - 74
ER  - 
@conference{
author = "Ivanović, Marija and Mladenović, Nataša and Gulicovski, Jelena and Pavlović, Vladimir B. and Pavlović, Vera P. and Kljajević, Ljiljana M. and Nenadović, Snežana S.",
year = "2018",
url = "http://dais.sanu.ac.rs/123456789/4116",
abstract = "Considering geopolymers as inorganic polymers, they are actually amorphous network of interlinked silicate and aluminate groups, so they could be prospective ceramic precursors for materials with defined dimensions obtained by casting and firing, but not from powder processing. In this research, the starting material is metakaolin, which was obtained by calcining domes tic kaolinite clay. Initially, four series of alkaline activators of NaOH and sodium silicate have been used. Activators present the mixtures of Na2SiO3 and solutions of NaOH, of different molarities 2M, 4M, 6M and 8M. The prepared geopolymer slurries were cast into the designated near shape at room temperature and after that at 60oC. In fact, the post-synthesis curing process (28 days) has an important role in the obtaining good characteristics of geopolymers. Densities, viscosities and refractive index of alkaline activators were determined over the temperature range 15-60oC of process of geopolymerizations. Based on the obtained results of investigated parameters have been selected to predict the properties of materials. All geopolymer samples were characterized by XRD, FTIR, SEM/EDS analysis and Raman spectroscopy providing complementary and valuable information of the investigated materials. This route of ceramics production has advantages associated with producing an environmental friendly, energy saving, clean new technology of geopolymer materials.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018",
title = "Effect of Alkaline Activator Properties on Structure of Metakaolin-Based Geopolymer Samples",
pages = "73-74"
}
Ivanović, M., Mladenović, N., Gulicovski, J., Pavlović, V. B., Pavlović, V. P., Kljajević, L. M.,& Nenadović, S. S. (2018). Effect of Alkaline Activator Properties on Structure of Metakaolin-Based Geopolymer Samples.
Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018Belgrade : Serbian Ceramic Society., null, 73-74. 
Ivanović M, Mladenović N, Gulicovski J, Pavlović VB, Pavlović VP, Kljajević LM, Nenadović SS. Effect of Alkaline Activator Properties on Structure of Metakaolin-Based Geopolymer Samples. Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018. 2018;:73-74

Mechanochemical treatment and structural properties of lead adsorption on kaolinite (Rudovci, Serbia)

Nenadović, Snežana S.; Kljajević, Ljiljana M.; Nenadović, Miloš; Mirković, Miljana M.; Marković, Smilja; Rakočević, Zlatko

(2015)

TY  - JOUR
AU  - Nenadović, Snežana S.
AU  - Kljajević, Ljiljana M.
AU  - Nenadović, Miloš
AU  - Mirković, Miljana M.
AU  - Marković, Smilja
AU  - Rakočević, Zlatko
PY  - 2015
UR  - http://dais.sanu.ac.rs/123456789/3356
AB  - In the present work, remediation of lead-containing solution using raw and modified kaolinite has been presented. The micro and nanostructure of samples has been characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and atomic force microscopy (AFM). Laser diffraction and scattering (LDS), was analyzed by particle size analyzer based on laser diffraction and particle size distribution (PSD) was done. The degree of metal adsorption was evaluated analyzing the Pb(II) contaminated samples by inductively coupled plasma atomic emission spectrometry (micro- and nanostructure on immobilization efficiency correlCP AES). The results show the impact of immobilization efficiency and ation between micro- and nanostructure. The thermodynamic data (Delta HA degrees, Delta SA degrees, Delta GA degrees) are calculated from the temperature-dependent sorption isotherms. The results suggest sorption process of Pb(II) on kaolinite as spontaneous and endothermic.
T2  - Environmental Earth Sciences
T1  - Mechanochemical treatment and structural properties of lead adsorption on kaolinite (Rudovci, Serbia)
SP  - 7669
EP  - 7677
VL  - 73
IS  - 11
DO  - 10.1007/s12665-014-3941-y
ER  - 
@article{
author = "Nenadović, Snežana S. and Kljajević, Ljiljana M. and Nenadović, Miloš and Mirković, Miljana M. and Marković, Smilja and Rakočević, Zlatko",
year = "2015",
url = "http://dais.sanu.ac.rs/123456789/3356",
abstract = "In the present work, remediation of lead-containing solution using raw and modified kaolinite has been presented. The micro and nanostructure of samples has been characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and atomic force microscopy (AFM). Laser diffraction and scattering (LDS), was analyzed by particle size analyzer based on laser diffraction and particle size distribution (PSD) was done. The degree of metal adsorption was evaluated analyzing the Pb(II) contaminated samples by inductively coupled plasma atomic emission spectrometry (micro- and nanostructure on immobilization efficiency correlCP AES). The results show the impact of immobilization efficiency and ation between micro- and nanostructure. The thermodynamic data (Delta HA degrees, Delta SA degrees, Delta GA degrees) are calculated from the temperature-dependent sorption isotherms. The results suggest sorption process of Pb(II) on kaolinite as spontaneous and endothermic.",
journal = "Environmental Earth Sciences",
title = "Mechanochemical treatment and structural properties of lead adsorption on kaolinite (Rudovci, Serbia)",
pages = "7669-7677",
volume = "73",
number = "11",
doi = "10.1007/s12665-014-3941-y"
}
Nenadović, S. S., Kljajević, L. M., Nenadović, M., Mirković, M. M., Marković, S.,& Rakočević, Z. (2015). Mechanochemical treatment and structural properties of lead adsorption on kaolinite (Rudovci, Serbia).
Environmental Earth Sciences, 73(11), 7669-7677. 
https://doi.org/10.1007/s12665-014-3941-y
Nenadović SS, Kljajević LM, Nenadović M, Mirković MM, Marković S, Rakočević Z. Mechanochemical treatment and structural properties of lead adsorption on kaolinite (Rudovci, Serbia). Environmental Earth Sciences. 2015;73(11):7669-7677
10
11
13