TY  - CONF
AU  - Marković, R.
AU  - Jugović, Branimir
AU  - Gvozdenović, Milica M.
AU  - Stevanović, Jasmina S.
AU  - Stevanović, Z.
AU  - Bugarin, Mile
PY  - 2011
UR  - https://dais.sanu.ac.rs/123456789/551
AB  - This paper addresses on investigation the possibility of electrolytic treatment the sulphur acidic waste solution, obtained in the conventional electrolytic copper refining process. The copper anodes with non-standard nickel, lead, tin and antimony content were specially prepared for the refining process. Nickel content of all anodes was approximately 7.5 mass %, and the content of lead, tin and antimony was varied. It was observed, that anodes with O2 content lower than 200 ppm, were not passivated. Results, obtained using the standard electrochemical techniques, have indicated that the anodes with non-standard chemical composition could be used under the same conditions as well as in the conventional copper refining process.
PB  - Tatranské Matliare : Slovak Society of Chemical Engineering
C3  - Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering
T1  - Analyzing the corrosion characteristics of anodes used for the sulphur acidic waste water treatment
SP  - 972
EP  - 975
UR  - https://hdl.handle.net/21.15107/rcub_dais_551
ER  - 

@conference{
author = "Marković, R. and Jugović, Branimir and Gvozdenović, Milica M. and Stevanović, Jasmina S. and Stevanović, Z. and Bugarin, Mile",
year = "2011",
abstract = "This paper addresses on investigation the possibility of electrolytic treatment the sulphur acidic waste solution, obtained in the conventional electrolytic copper refining process. The copper anodes with non-standard nickel, lead, tin and antimony content were specially prepared for the refining process. Nickel content of all anodes was approximately 7.5 mass %, and the content of lead, tin and antimony was varied. It was observed, that anodes with O2 content lower than 200 ppm, were not passivated. Results, obtained using the standard electrochemical techniques, have indicated that the anodes with non-standard chemical composition could be used under the same conditions as well as in the conventional copper refining process.",
publisher = "Tatranské Matliare : Slovak Society of Chemical Engineering",
journal = "Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering",
title = "Analyzing the corrosion characteristics of anodes used for the sulphur acidic waste water treatment",
pages = "972-975",
url = "https://hdl.handle.net/21.15107/rcub_dais_551"
}

Marković, R., Jugović, B., Gvozdenović, M. M., Stevanović, J. S., Stevanović, Z.,& Bugarin, M.. (2011). Analyzing the corrosion characteristics of anodes used for the sulphur acidic waste water treatment. in Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering
Tatranské Matliare : Slovak Society of Chemical Engineering., 972-975.
https://hdl.handle.net/21.15107/rcub_dais_551

Marković R, Jugović B, Gvozdenović MM, Stevanović JS, Stevanović Z, Bugarin M. Analyzing the corrosion characteristics of anodes used for the sulphur acidic waste water treatment. in Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering. 2011;:972-975.
https://hdl.handle.net/21.15107/rcub_dais_551 .

Marković, R., Jugović, Branimir, Gvozdenović, Milica M., Stevanović, Jasmina S., Stevanović, Z., Bugarin, Mile, "Analyzing the corrosion characteristics of anodes used for the sulphur acidic waste water treatment" in Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering (2011):972-975,
https://hdl.handle.net/21.15107/rcub_dais_551 .

TY  - CONF
AU  - Marković, R.
AU  - Jugović, Branimir
AU  - Gvozdenović, Milica M.
AU  - Stevanović, Jasmina S.
AU  - Stevanović, Z.
AU  - Bugarin, Mile
PY  - 2011
UR  - https://dais.sanu.ac.rs/123456789/550
AB  - This paper addresses on investigation the possibility of electrolytic treatment the sulphur acidic waste solution, obtained in the conventional electrolytic copper refining process. The copper anodes with non-standard nickel, lead, tin and antimony content were specially prepared for the refining process. Nickel content of all anodes was approximately 7.5 mass %, and the content of lead, tin and antimony was varied. Results, obtained using the standard electrochemical techniques, have indicated that the anodes could be used under the same conditions as well as in the conventional copper refining process.
PB  - Tatranské Matliare : Slovak Society of Chemical Engineering
C3  - Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering
T1  - The use of anodic linear sweep voltammetery analysis (ALSV) for characterization the copper anodes used for sulphur acidic waste solution treatment
SP  - 968
EP  - 971
UR  - https://hdl.handle.net/21.15107/rcub_dais_550
ER  - 

@conference{
author = "Marković, R. and Jugović, Branimir and Gvozdenović, Milica M. and Stevanović, Jasmina S. and Stevanović, Z. and Bugarin, Mile",
year = "2011",
abstract = "This paper addresses on investigation the possibility of electrolytic treatment the sulphur acidic waste solution, obtained in the conventional electrolytic copper refining process. The copper anodes with non-standard nickel, lead, tin and antimony content were specially prepared for the refining process. Nickel content of all anodes was approximately 7.5 mass %, and the content of lead, tin and antimony was varied. Results, obtained using the standard electrochemical techniques, have indicated that the anodes could be used under the same conditions as well as in the conventional copper refining process.",
publisher = "Tatranské Matliare : Slovak Society of Chemical Engineering",
journal = "Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering",
title = "The use of anodic linear sweep voltammetery analysis (ALSV) for characterization the copper anodes used for sulphur acidic waste solution treatment",
pages = "968-971",
url = "https://hdl.handle.net/21.15107/rcub_dais_550"
}

Marković, R., Jugović, B., Gvozdenović, M. M., Stevanović, J. S., Stevanović, Z.,& Bugarin, M.. (2011). The use of anodic linear sweep voltammetery analysis (ALSV) for characterization the copper anodes used for sulphur acidic waste solution treatment. in Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering
Tatranské Matliare : Slovak Society of Chemical Engineering., 968-971.
https://hdl.handle.net/21.15107/rcub_dais_550

Marković R, Jugović B, Gvozdenović MM, Stevanović JS, Stevanović Z, Bugarin M. The use of anodic linear sweep voltammetery analysis (ALSV) for characterization the copper anodes used for sulphur acidic waste solution treatment. in Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering. 2011;:968-971.
https://hdl.handle.net/21.15107/rcub_dais_550 .

Marković, R., Jugović, Branimir, Gvozdenović, Milica M., Stevanović, Jasmina S., Stevanović, Z., Bugarin, Mile, "The use of anodic linear sweep voltammetery analysis (ALSV) for characterization the copper anodes used for sulphur acidic waste solution treatment" in Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering (2011):968-971,
https://hdl.handle.net/21.15107/rcub_dais_550 .