Stojanović, Mirjana

Link to this page

Authority KeyName Variants
90a192d2-ad6b-47db-b95d-423f3b42a297
  • Stojanović, Mirjana (3)
Projects

Author's Bibliography

Effects of different mechanical treatments on structural changes of lignocellulosic waste biomass and subsequent Cu(II) removal kinetics

Lopičić, Zorica; Stojanović, Mirjana; Marković, Smilja; Milojković, Jelena V.; Mihajlović, Marija L.; Kaluđerović Radoičić, Tatjana S.; Kijevčanin, Mirjana Lj.

(Elsevier, 2019)

TY  - JOUR
AU  - Lopičić, Zorica
AU  - Stojanović, Mirjana
AU  - Marković, Smilja
AU  - Milojković, Jelena V.
AU  - Mihajlović, Marija L.
AU  - Kaluđerović Radoičić, Tatjana S.
AU  - Kijevčanin, Mirjana Lj.
PY  - 2019
UR  - https://dais.sanu.ac.rs/123456789/2312
AB  - In this paper, the character of structural changes induced by different mechanical treatments to Prunus persica stones (PSs), and its subsequent effect on biosorption kinetics of Cu(II) were investigated. PSs were processed in vibratory disk mill (PS-V) and ultra-centrifugal mill (PS-C) and characterized by XRD, BET, SEM and FTIR spectroscopy. It was shown that PS-V was smaller and more reactive with less crystallinity index and hydrogen bond intensity compared to PS-C. In opposite, surface area of the PS-C was bigger than that of the PS-V. The total pore volume was about threefold, while the volume of micro pores was 9.29 times higher in PS-Cs than in PS-Vs.

The kinetics of Cu(II) biosorption by both PSs was tested through various kinetic models: pseudo-first and pseudo-second order rate equations, Elovich equation, Boyd model, Weber–Morris and Urano–Tachikawa intraparticle diffusion model. For both sample types, Cu(II) biosorption occurred through combination of intraparticle and film diffusion mechanism, while kinetic results were best described by the pseudo-second order kinetic model. At the same time, the results indicated that together with kinetic rate the biosorption capacity of PS-C (21.20 mg g−1) was higher than that of PS-V (16.30 mg g−1).

Mechanical activation like crushing and grinding will change material particle size, specific surface area and porosity, as well as its crystallinity. However, this paper elucidates that such physical structural changes will impact on heavy metal ions removal efficiency. This investigation suggests that the type of size reduction in lignocellulosic biosorbent preparation plays a very important role in overall biosorption performance, so it should be carefully considered every time when the mechanical treatment of material is necessary to be applied.
PB  - Elsevier
T2  - Arabian Journal of Chemistry
T1  - Effects of different mechanical treatments on structural changes of lignocellulosic waste biomass and subsequent Cu(II) removal kinetics
SP  - 4091
EP  - 4103
VL  - 12
IS  - 8
DO  - 10.1016/j.arabjc.2016.04.005
UR  - https://hdl.handle.net/21.15107/rcub_dais_2312
ER  - 
@article{
author = "Lopičić, Zorica and Stojanović, Mirjana and Marković, Smilja and Milojković, Jelena V. and Mihajlović, Marija L. and Kaluđerović Radoičić, Tatjana S. and Kijevčanin, Mirjana Lj.",
year = "2019",
abstract = "In this paper, the character of structural changes induced by different mechanical treatments to Prunus persica stones (PSs), and its subsequent effect on biosorption kinetics of Cu(II) were investigated. PSs were processed in vibratory disk mill (PS-V) and ultra-centrifugal mill (PS-C) and characterized by XRD, BET, SEM and FTIR spectroscopy. It was shown that PS-V was smaller and more reactive with less crystallinity index and hydrogen bond intensity compared to PS-C. In opposite, surface area of the PS-C was bigger than that of the PS-V. The total pore volume was about threefold, while the volume of micro pores was 9.29 times higher in PS-Cs than in PS-Vs.

The kinetics of Cu(II) biosorption by both PSs was tested through various kinetic models: pseudo-first and pseudo-second order rate equations, Elovich equation, Boyd model, Weber–Morris and Urano–Tachikawa intraparticle diffusion model. For both sample types, Cu(II) biosorption occurred through combination of intraparticle and film diffusion mechanism, while kinetic results were best described by the pseudo-second order kinetic model. At the same time, the results indicated that together with kinetic rate the biosorption capacity of PS-C (21.20 mg g−1) was higher than that of PS-V (16.30 mg g−1).

Mechanical activation like crushing and grinding will change material particle size, specific surface area and porosity, as well as its crystallinity. However, this paper elucidates that such physical structural changes will impact on heavy metal ions removal efficiency. This investigation suggests that the type of size reduction in lignocellulosic biosorbent preparation plays a very important role in overall biosorption performance, so it should be carefully considered every time when the mechanical treatment of material is necessary to be applied.",
publisher = "Elsevier",
journal = "Arabian Journal of Chemistry",
title = "Effects of different mechanical treatments on structural changes of lignocellulosic waste biomass and subsequent Cu(II) removal kinetics",
pages = "4091-4103",
volume = "12",
number = "8",
doi = "10.1016/j.arabjc.2016.04.005",
url = "https://hdl.handle.net/21.15107/rcub_dais_2312"
}
Lopičić, Z., Stojanović, M., Marković, S., Milojković, J. V., Mihajlović, M. L., Kaluđerović Radoičić, T. S.,& Kijevčanin, M. Lj.. (2019). Effects of different mechanical treatments on structural changes of lignocellulosic waste biomass and subsequent Cu(II) removal kinetics. in Arabian Journal of Chemistry
Elsevier., 12(8), 4091-4103.
https://doi.org/10.1016/j.arabjc.2016.04.005
https://hdl.handle.net/21.15107/rcub_dais_2312
Lopičić Z, Stojanović M, Marković S, Milojković JV, Mihajlović ML, Kaluđerović Radoičić TS, Kijevčanin ML. Effects of different mechanical treatments on structural changes of lignocellulosic waste biomass and subsequent Cu(II) removal kinetics. in Arabian Journal of Chemistry. 2019;12(8):4091-4103.
doi:10.1016/j.arabjc.2016.04.005
https://hdl.handle.net/21.15107/rcub_dais_2312 .
Lopičić, Zorica, Stojanović, Mirjana, Marković, Smilja, Milojković, Jelena V., Mihajlović, Marija L., Kaluđerović Radoičić, Tatjana S., Kijevčanin, Mirjana Lj., "Effects of different mechanical treatments on structural changes of lignocellulosic waste biomass and subsequent Cu(II) removal kinetics" in Arabian Journal of Chemistry, 12, no. 8 (2019):4091-4103,
https://doi.org/10.1016/j.arabjc.2016.04.005 .,
https://hdl.handle.net/21.15107/rcub_dais_2312 .
34
17
37

Uklanjanje uranil-jona iz rastvora kiselo tretiranim zeolitima

Matijašević, Srđan; Zildžović, Snežana; Stojanović, Jovica; Đošić, Marija; Nikolić, Jelena; Stojanović, Mirjana; Labus, Nebojša

(2016)

TY  - JOUR
AU  - Matijašević, Srđan
AU  - Zildžović, Snežana
AU  - Stojanović, Jovica
AU  - Đošić, Marija
AU  - Nikolić, Jelena
AU  - Stojanović, Mirjana
AU  - Labus, Nebojša
PY  - 2016
UR  - https://dais.sanu.ac.rs/123456789/899
AB  - Cilj ovog rada je prikaz mogućnosti primene prirodnog i modifikovanog zeolitskog minerala kao adsorbenta i materijala za sanaciju voda kontaminiranih uranijum jonom. Modifikovani uzorci zeolita dobijeni su tretiranjem prirodnog zeolita - klinoptilolita sa kiselinama: hlorovodoničnom, oksalnom i limunskom. Polazni i modifikovani zeoliti su okarakterisani hemijskom analizom, skenirajućom elektronskom mikroskopijom (SEM), rendgenskom analizom (XRPD), IC spektroskopijom, termičkom (TG/DTA) analizom i određivanjem kapaciteta katjonske izmene, a polazne i neadsorbovane količine uranijum jona su određene fluorimetrijski. Eksperimenti su sprovedeni da se ispita uticaj odnosa čvrsto/tečno, pH i vremena na adsorpciju uranijum jona na zeolitu. Utvrđeno je da tretman sa kiselinama zeolita povećava adsorpciju uranijum jona. Najviši indeks adsorpcije imao je uzorak zeolita modifikovan sa hlorovodoničnom kiselinom. Dobijeni rezultati adsorpcije na H-zeolitu su izračunati prema Langmirovom modelu.

Projekat MPNTR, br. 142057
Razvoj stakala sa kontrolisanim otpuštanjem jona za primenu u poljoprivredi i medicini (MPNTR - 34001)
AB  - The objective of this study was the review of natural zeolite, modified with acid, as a candidate material for the remediation of groundwater contaminated by uranium(VI). The modified zeolite samples were obtained by treatment of natural zeolite - clinoptilolite with acids: hydrochloric, oxalyc and citric. Starting and modified zeolites were characterized by chemical analysis, SEM, XRPD analysis, IR spectroscopy, thermal (TG/DT) analysis and by determination of cation exchange capacity, while starting and nonadsorbed amounts of uranium(VI) ion were determined by fluorometric method. Batch experiments were conducted to investigate the effect of solid/liquid ratio, pH and time on the U(VI) uptake by zeolite. Modification of zeolitic tuff with acids significantly increased adsorption of uranium(VI). The highest adsorption of uranium(VI) ion was achieved on clinoptilolite modified with hydrochloric acid. Uranium(VI) adsorption data for zeolite modified with hydrochloric acid was fitted to the Langmuir model.

Projekat MPNTR, br. 142057
The development of glasses with controlled ions release for application in agriculture and medicine (MESTD - 34001)
T2  - Zaštita materijala
T1  - Uklanjanje uranil-jona iz rastvora kiselo tretiranim zeolitima
SP  - 551
EP  - 558
VL  - 57
IS  - 4
DO  - 10.5937/ZasMat1604551M
UR  - https://hdl.handle.net/21.15107/rcub_dais_899
ER  - 
@article{
author = "Matijašević, Srđan and Zildžović, Snežana and Stojanović, Jovica and Đošić, Marija and Nikolić, Jelena and Stojanović, Mirjana and Labus, Nebojša",
year = "2016",
abstract = "Cilj ovog rada je prikaz mogućnosti primene prirodnog i modifikovanog zeolitskog minerala kao adsorbenta i materijala za sanaciju voda kontaminiranih uranijum jonom. Modifikovani uzorci zeolita dobijeni su tretiranjem prirodnog zeolita - klinoptilolita sa kiselinama: hlorovodoničnom, oksalnom i limunskom. Polazni i modifikovani zeoliti su okarakterisani hemijskom analizom, skenirajućom elektronskom mikroskopijom (SEM), rendgenskom analizom (XRPD), IC spektroskopijom, termičkom (TG/DTA) analizom i određivanjem kapaciteta katjonske izmene, a polazne i neadsorbovane količine uranijum jona su određene fluorimetrijski. Eksperimenti su sprovedeni da se ispita uticaj odnosa čvrsto/tečno, pH i vremena na adsorpciju uranijum jona na zeolitu. Utvrđeno je da tretman sa kiselinama zeolita povećava adsorpciju uranijum jona. Najviši indeks adsorpcije imao je uzorak zeolita modifikovan sa hlorovodoničnom kiselinom. Dobijeni rezultati adsorpcije na H-zeolitu su izračunati prema Langmirovom modelu.

Projekat MPNTR, br. 142057
Razvoj stakala sa kontrolisanim otpuštanjem jona za primenu u poljoprivredi i medicini (MPNTR - 34001), The objective of this study was the review of natural zeolite, modified with acid, as a candidate material for the remediation of groundwater contaminated by uranium(VI). The modified zeolite samples were obtained by treatment of natural zeolite - clinoptilolite with acids: hydrochloric, oxalyc and citric. Starting and modified zeolites were characterized by chemical analysis, SEM, XRPD analysis, IR spectroscopy, thermal (TG/DT) analysis and by determination of cation exchange capacity, while starting and nonadsorbed amounts of uranium(VI) ion were determined by fluorometric method. Batch experiments were conducted to investigate the effect of solid/liquid ratio, pH and time on the U(VI) uptake by zeolite. Modification of zeolitic tuff with acids significantly increased adsorption of uranium(VI). The highest adsorption of uranium(VI) ion was achieved on clinoptilolite modified with hydrochloric acid. Uranium(VI) adsorption data for zeolite modified with hydrochloric acid was fitted to the Langmuir model.

Projekat MPNTR, br. 142057
The development of glasses with controlled ions release for application in agriculture and medicine (MESTD - 34001)",
journal = "Zaštita materijala",
title = "Uklanjanje uranil-jona iz rastvora kiselo tretiranim zeolitima",
pages = "551-558",
volume = "57",
number = "4",
doi = "10.5937/ZasMat1604551M",
url = "https://hdl.handle.net/21.15107/rcub_dais_899"
}
Matijašević, S., Zildžović, S., Stojanović, J., Đošić, M., Nikolić, J., Stojanović, M.,& Labus, N.. (2016). Uklanjanje uranil-jona iz rastvora kiselo tretiranim zeolitima. in Zaštita materijala, 57(4), 551-558.
https://doi.org/10.5937/ZasMat1604551M
https://hdl.handle.net/21.15107/rcub_dais_899
Matijašević S, Zildžović S, Stojanović J, Đošić M, Nikolić J, Stojanović M, Labus N. Uklanjanje uranil-jona iz rastvora kiselo tretiranim zeolitima. in Zaštita materijala. 2016;57(4):551-558.
doi:10.5937/ZasMat1604551M
https://hdl.handle.net/21.15107/rcub_dais_899 .
Matijašević, Srđan, Zildžović, Snežana, Stojanović, Jovica, Đošić, Marija, Nikolić, Jelena, Stojanović, Mirjana, Labus, Nebojša, "Uklanjanje uranil-jona iz rastvora kiselo tretiranim zeolitima" in Zaštita materijala, 57, no. 4 (2016):551-558,
https://doi.org/10.5937/ZasMat1604551M .,
https://hdl.handle.net/21.15107/rcub_dais_899 .
7

Application of raw peach shell particles for removal of methylene blue

Marković, Smilja; Stanković, Ana; Lopičić, Zorica; Lazarević, Slavica; Stojanović, Mirjana; Uskoković, Dragan

(Elsevier, 2015)

TY  - JOUR
AU  - Marković, Smilja
AU  - Stanković, Ana
AU  - Lopičić, Zorica
AU  - Lazarević, Slavica
AU  - Stojanović, Mirjana
AU  - Uskoković, Dragan
PY  - 2015
UR  - https://dais.sanu.ac.rs/123456789/3524
AB  - A possibility to apply raw, powdered peach shells (PS) as a biosorbent for water purification was studied. The PSs are locally available as a solid waste in a fruit juice factory; methylene blue (MB) was chosen as representative of common pollutants in textile industry wastewater. The phase composition of prepared particles was identified by XRD. The particle morphology was characterized by FE-SEM, while the size distribution was measured by a laser light-scattering particle size analyzer. The BET specific surface area was determined from N2 adsorption/desorption experiments. The effect of operating parameters: the biosorbent amount (50-1000 mg/100 mL), contact time (10-180 min), solution pH (2-12) and initial concentration (10-100 ppm) on biosorption efficiency was examined. Optimal conditions for MB removal were found to be: the biosorbent amount of 400 mg/100 mL and pH 5.5. A high efficiency of MB removal was established after 180 min: 99% for [MB]i = 10 ppm and 76% for [MB]i = 100 ppm. Biosorption is well described by the Freundlich- and BET-type isotherms, implicating heterogeneous adsorption sites and interconnections between adsorbed molecules. The FTIR spectroscopy results indicate hydrogen bonding between the dye and the biomass. The obtained results shown that raw peach shell particles could be used as an efficient low-cost biosorbent for dye removal from water. © 2015 Elsevier Ltd.
PB  - Elsevier
T2  - Journal of Environmental Chemical Engineering
T1  - Application of raw peach shell particles for removal of methylene blue
SP  - 716
EP  - 724
VL  - 3
IS  - 2
DO  - 10.1016/j.jece.2015.04.002
UR  - https://hdl.handle.net/21.15107/rcub_dais_3524
ER  - 
@article{
author = "Marković, Smilja and Stanković, Ana and Lopičić, Zorica and Lazarević, Slavica and Stojanović, Mirjana and Uskoković, Dragan",
year = "2015",
abstract = "A possibility to apply raw, powdered peach shells (PS) as a biosorbent for water purification was studied. The PSs are locally available as a solid waste in a fruit juice factory; methylene blue (MB) was chosen as representative of common pollutants in textile industry wastewater. The phase composition of prepared particles was identified by XRD. The particle morphology was characterized by FE-SEM, while the size distribution was measured by a laser light-scattering particle size analyzer. The BET specific surface area was determined from N2 adsorption/desorption experiments. The effect of operating parameters: the biosorbent amount (50-1000 mg/100 mL), contact time (10-180 min), solution pH (2-12) and initial concentration (10-100 ppm) on biosorption efficiency was examined. Optimal conditions for MB removal were found to be: the biosorbent amount of 400 mg/100 mL and pH 5.5. A high efficiency of MB removal was established after 180 min: 99% for [MB]i = 10 ppm and 76% for [MB]i = 100 ppm. Biosorption is well described by the Freundlich- and BET-type isotherms, implicating heterogeneous adsorption sites and interconnections between adsorbed molecules. The FTIR spectroscopy results indicate hydrogen bonding between the dye and the biomass. The obtained results shown that raw peach shell particles could be used as an efficient low-cost biosorbent for dye removal from water. © 2015 Elsevier Ltd.",
publisher = "Elsevier",
journal = "Journal of Environmental Chemical Engineering",
title = "Application of raw peach shell particles for removal of methylene blue",
pages = "716-724",
volume = "3",
number = "2",
doi = "10.1016/j.jece.2015.04.002",
url = "https://hdl.handle.net/21.15107/rcub_dais_3524"
}
Marković, S., Stanković, A., Lopičić, Z., Lazarević, S., Stojanović, M.,& Uskoković, D.. (2015). Application of raw peach shell particles for removal of methylene blue. in Journal of Environmental Chemical Engineering
Elsevier., 3(2), 716-724.
https://doi.org/10.1016/j.jece.2015.04.002
https://hdl.handle.net/21.15107/rcub_dais_3524
Marković S, Stanković A, Lopičić Z, Lazarević S, Stojanović M, Uskoković D. Application of raw peach shell particles for removal of methylene blue. in Journal of Environmental Chemical Engineering. 2015;3(2):716-724.
doi:10.1016/j.jece.2015.04.002
https://hdl.handle.net/21.15107/rcub_dais_3524 .
Marković, Smilja, Stanković, Ana, Lopičić, Zorica, Lazarević, Slavica, Stojanović, Mirjana, Uskoković, Dragan, "Application of raw peach shell particles for removal of methylene blue" in Journal of Environmental Chemical Engineering, 3, no. 2 (2015):716-724,
https://doi.org/10.1016/j.jece.2015.04.002 .,
https://hdl.handle.net/21.15107/rcub_dais_3524 .
82
63
86