Stojanović, Biljana

Link to this page

Authority KeyName Variants
14e995f8-2bcd-492a-b0b0-58bc7b6975c6
  • Stojanović, Biljana (2)
  • Stojanović, Biljana D. (1)
Projects

Author's Bibliography

Multiferroic BaTaO3–NaFe2 O4 composites: from bulk to multilayer thin films

Srdić, Vladimir V.; Bajac, Branimir; Vijatović Petrović, Mirjana; Milanović, Marija; Cvejić, Željka; Stojanović, Biljana D.

(Belgrade : SASA, 2020)

TY  - CONF
AU  - Srdić, Vladimir V.
AU  - Bajac, Branimir
AU  - Vijatović Petrović, Mirjana
AU  - Milanović, Marija
AU  - Cvejić, Željka
AU  - Stojanović, Biljana D.
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/9250
AB  - Током протекле деценије магнетоелектрични мултифероици су били
један од приоритетних истраживачких праваца у науци о материјалима,
јер представљају нову генерацију мултифункционалних материјала.
Мултифероике карактерише истовремено постојање бар два феро-уређења и
присуства фероелектрицитета и феромагнетизма, као и снажна интеракција
између њих (дефинисана као магнетоелектрични ефекат). Та својства су
веома битна за примене у различитим мултифункционалним уређајима.
У овом раду дат је преглед различитих техника добијања мултифероичних
керамичких композита и танких филмова на бази BaTiO3
–NiFe2
O4
. Главни
циљеви су били поређење композитних и танкослојних структура и њихових
својстава и стицање бољег разумевања повезаности интеракције између
магнетних и фероелектричних уређења, које би засигурно могле бити од
велике користи у дизајнирању нових мултиферонских материјала, а тиме и
сагледавању њихових нових примена.
AB  - Over the past decade, magnetoelectric multiferroic materials
have been one of the highest priority research topics as they represent new generation of novel multifunctional materials. Multiferroics are characterized by the
coexistence of at least two ferroic orders and the presence of ferroelectricity and
ferromagnetism, as well as a strong coupling interaction between them (defined
as magnetoelectric effect). These properties are essential for new applications in
multifunctional devices. This article focuses on various fabrication techniques used
for preparation of multiferroic composite ceramics and thin films. The main goals
are comparing obtained composite and thin film structures and their properties
and acquiring a better understanding of the coupling between magnetic and ferroelectric orders that could surely be very helpful in the design of novel multiferroic
materials and hence elucidating their new applications.
PB  - Belgrade : SASA
C3  - Fascinating world of nanoscience and nanotechnology
T1  - Multiferroic BaTaO3–NaFe2 O4  composites: from bulk to multilayer thin films
T1  - Mултифероични BaTaO3–NaFe2 O4  композити: од керамике до вишеслојних танких филмова
SP  - 183
EP  - 219
UR  - https://hdl.handle.net/21.15107/rcub_dais_9250
ER  - 
@conference{
author = "Srdić, Vladimir V. and Bajac, Branimir and Vijatović Petrović, Mirjana and Milanović, Marija and Cvejić, Željka and Stojanović, Biljana D.",
year = "2020",
abstract = "Током протекле деценије магнетоелектрични мултифероици су били
један од приоритетних истраживачких праваца у науци о материјалима,
јер представљају нову генерацију мултифункционалних материјала.
Мултифероике карактерише истовремено постојање бар два феро-уређења и
присуства фероелектрицитета и феромагнетизма, као и снажна интеракција
између њих (дефинисана као магнетоелектрични ефекат). Та својства су
веома битна за примене у различитим мултифункционалним уређајима.
У овом раду дат је преглед различитих техника добијања мултифероичних
керамичких композита и танких филмова на бази BaTiO3
–NiFe2
O4
. Главни
циљеви су били поређење композитних и танкослојних структура и њихових
својстава и стицање бољег разумевања повезаности интеракције између
магнетних и фероелектричних уређења, које би засигурно могле бити од
велике користи у дизајнирању нових мултиферонских материјала, а тиме и
сагледавању њихових нових примена., Over the past decade, magnetoelectric multiferroic materials
have been one of the highest priority research topics as they represent new generation of novel multifunctional materials. Multiferroics are characterized by the
coexistence of at least two ferroic orders and the presence of ferroelectricity and
ferromagnetism, as well as a strong coupling interaction between them (defined
as magnetoelectric effect). These properties are essential for new applications in
multifunctional devices. This article focuses on various fabrication techniques used
for preparation of multiferroic composite ceramics and thin films. The main goals
are comparing obtained composite and thin film structures and their properties
and acquiring a better understanding of the coupling between magnetic and ferroelectric orders that could surely be very helpful in the design of novel multiferroic
materials and hence elucidating their new applications.",
publisher = "Belgrade : SASA",
journal = "Fascinating world of nanoscience and nanotechnology",
title = "Multiferroic BaTaO3–NaFe2 O4  composites: from bulk to multilayer thin films, Mултифероични BaTaO3–NaFe2 O4  композити: од керамике до вишеслојних танких филмова",
pages = "183-219",
url = "https://hdl.handle.net/21.15107/rcub_dais_9250"
}
Srdić, V. V., Bajac, B., Vijatović Petrović, M., Milanović, M., Cvejić, Ž.,& Stojanović, B. D.. (2020). Multiferroic BaTaO3–NaFe2 O4  composites: from bulk to multilayer thin films. in Fascinating world of nanoscience and nanotechnology
Belgrade : SASA., 183-219.
https://hdl.handle.net/21.15107/rcub_dais_9250
Srdić VV, Bajac B, Vijatović Petrović M, Milanović M, Cvejić Ž, Stojanović BD. Multiferroic BaTaO3–NaFe2 O4  composites: from bulk to multilayer thin films. in Fascinating world of nanoscience and nanotechnology. 2020;:183-219.
https://hdl.handle.net/21.15107/rcub_dais_9250 .
Srdić, Vladimir V., Bajac, Branimir, Vijatović Petrović, Mirjana, Milanović, Marija, Cvejić, Željka, Stojanović, Biljana D., "Multiferroic BaTaO3–NaFe2 O4  composites: from bulk to multilayer thin films" in Fascinating world of nanoscience and nanotechnology (2020):183-219,
https://hdl.handle.net/21.15107/rcub_dais_9250 .

Application of the master sintering curve theory to non-isothermal sintering of BaTiO3 ceramics

Nikolić, Maria Vesna; Pavlović, Vera P.; Pavlović, Vladimir B.; Labus, Nebojša; Stojanović, Biljana

(Trans Tech Publications Ltd, Durnten-Zurich, 2005)

TY  - JOUR
AU  - Nikolić, Maria Vesna
AU  - Pavlović, Vera P.
AU  - Pavlović, Vladimir B.
AU  - Labus, Nebojša
AU  - Stojanović, Biljana
PY  - 2005
UR  - https://dais.sanu.ac.rs/123456789/13366
AB  - In this paper a practical approach to the analysis of sintering of BaTiO3 using the Master Sintering Curve concept has been presented. Non-isothermal sintering of high-purity non-doped BaTiO3 ceramics was monitored using a sensitive dilatometer at three different heating rates (10, 20 and 30 degrees C/min) up to 1380 degrees C. Densification. of BaTiO3 during sintering was analyzed using the Master Curve Sintering Theory. A MSC was defined characterizing the sintering behavior of barium-titanate regardless of the heating rate. Construction of the MSC enabled estimation of the process activation energy. Using defined MSC, densification behavior of BaTiO3 ceramics during sintering can be predicted for arbitrary temperature-time excursions and these predictions can be used in controlling and planning the sintering process of this material.
PB  - Trans Tech Publications Ltd, Durnten-Zurich
T2  - Current Research in Advanced Materials and Processes
T1  - Application of the master sintering curve theory to non-isothermal sintering of BaTiO3 ceramics
SP  - 417
EP  - 422
VL  - 494
DO  - 10.4028/www.scientific.net/MSF.494.417
UR  - https://hdl.handle.net/21.15107/rcub_dais_13366
ER  - 
@article{
author = "Nikolić, Maria Vesna and Pavlović, Vera P. and Pavlović, Vladimir B. and Labus, Nebojša and Stojanović, Biljana",
year = "2005",
abstract = "In this paper a practical approach to the analysis of sintering of BaTiO3 using the Master Sintering Curve concept has been presented. Non-isothermal sintering of high-purity non-doped BaTiO3 ceramics was monitored using a sensitive dilatometer at three different heating rates (10, 20 and 30 degrees C/min) up to 1380 degrees C. Densification. of BaTiO3 during sintering was analyzed using the Master Curve Sintering Theory. A MSC was defined characterizing the sintering behavior of barium-titanate regardless of the heating rate. Construction of the MSC enabled estimation of the process activation energy. Using defined MSC, densification behavior of BaTiO3 ceramics during sintering can be predicted for arbitrary temperature-time excursions and these predictions can be used in controlling and planning the sintering process of this material.",
publisher = "Trans Tech Publications Ltd, Durnten-Zurich",
journal = "Current Research in Advanced Materials and Processes",
title = "Application of the master sintering curve theory to non-isothermal sintering of BaTiO3 ceramics",
pages = "417-422",
volume = "494",
doi = "10.4028/www.scientific.net/MSF.494.417",
url = "https://hdl.handle.net/21.15107/rcub_dais_13366"
}
Nikolić, M. V., Pavlović, V. P., Pavlović, V. B., Labus, N.,& Stojanović, B.. (2005). Application of the master sintering curve theory to non-isothermal sintering of BaTiO3 ceramics. in Current Research in Advanced Materials and Processes
Trans Tech Publications Ltd, Durnten-Zurich., 494, 417-422.
https://doi.org/10.4028/www.scientific.net/MSF.494.417
https://hdl.handle.net/21.15107/rcub_dais_13366
Nikolić MV, Pavlović VP, Pavlović VB, Labus N, Stojanović B. Application of the master sintering curve theory to non-isothermal sintering of BaTiO3 ceramics. in Current Research in Advanced Materials and Processes. 2005;494:417-422.
doi:10.4028/www.scientific.net/MSF.494.417
https://hdl.handle.net/21.15107/rcub_dais_13366 .
Nikolić, Maria Vesna, Pavlović, Vera P., Pavlović, Vladimir B., Labus, Nebojša, Stojanović, Biljana, "Application of the master sintering curve theory to non-isothermal sintering of BaTiO3 ceramics" in Current Research in Advanced Materials and Processes, 494 (2005):417-422,
https://doi.org/10.4028/www.scientific.net/MSF.494.417 .,
https://hdl.handle.net/21.15107/rcub_dais_13366 .
15
18
16

Synthesis and deposition of ZnO based particles by aerosol spray pyrolysis

Milošević, Olivera; Gagić, Vladimir; Vodnik, Jože; Mitrović, Aleksandra; Karanović, Ljiljana; Stojanović, Biljana; Živković, Ljiljana

(Elsevier Science Sa, Lausanne, 1997)

TY  - JOUR
AU  - Milošević, Olivera
AU  - Gagić, Vladimir
AU  - Vodnik, Jože
AU  - Mitrović, Aleksandra
AU  - Karanović, Ljiljana
AU  - Stojanović, Biljana
AU  - Živković, Ljiljana
PY  - 1997
UR  - https://dais.sanu.ac.rs/123456789/12875
AB  - Spray pyrolysis was used for the deposition of well defined submicronic to nanosize particles based on ZnO. The influence of the temperature in the range from 345 to 1165 K, solution concentration (0.004 and 1.5 mol dm(-3)) and the residence time on the particle morphology is discussed. X-ray diffraction, differential scanning calorimetry and scanning electron microscopy were used in particle characterization. With the presumption that certain particle morphology is formed during the evaporation/drying stage of spray pyrolysis, the corresponding mathematical model for droplets evaporation is developed and correlated with the empirical results.
PB  - Elsevier Science Sa, Lausanne
T2  - Thin Solid Films
T1  - Synthesis and deposition of ZnO based particles by aerosol spray pyrolysis
SP  - 44
EP  - 48
VL  - 296
IS  - 1-2
DO  - 10.1016/S0040-6090(96)09358-3
UR  - https://hdl.handle.net/21.15107/rcub_dais_12875
ER  - 
@article{
author = "Milošević, Olivera and Gagić, Vladimir and Vodnik, Jože and Mitrović, Aleksandra and Karanović, Ljiljana and Stojanović, Biljana and Živković, Ljiljana",
year = "1997",
abstract = "Spray pyrolysis was used for the deposition of well defined submicronic to nanosize particles based on ZnO. The influence of the temperature in the range from 345 to 1165 K, solution concentration (0.004 and 1.5 mol dm(-3)) and the residence time on the particle morphology is discussed. X-ray diffraction, differential scanning calorimetry and scanning electron microscopy were used in particle characterization. With the presumption that certain particle morphology is formed during the evaporation/drying stage of spray pyrolysis, the corresponding mathematical model for droplets evaporation is developed and correlated with the empirical results.",
publisher = "Elsevier Science Sa, Lausanne",
journal = "Thin Solid Films",
title = "Synthesis and deposition of ZnO based particles by aerosol spray pyrolysis",
pages = "44-48",
volume = "296",
number = "1-2",
doi = "10.1016/S0040-6090(96)09358-3",
url = "https://hdl.handle.net/21.15107/rcub_dais_12875"
}
Milošević, O., Gagić, V., Vodnik, J., Mitrović, A., Karanović, L., Stojanović, B.,& Živković, L.. (1997). Synthesis and deposition of ZnO based particles by aerosol spray pyrolysis. in Thin Solid Films
Elsevier Science Sa, Lausanne., 296(1-2), 44-48.
https://doi.org/10.1016/S0040-6090(96)09358-3
https://hdl.handle.net/21.15107/rcub_dais_12875
Milošević O, Gagić V, Vodnik J, Mitrović A, Karanović L, Stojanović B, Živković L. Synthesis and deposition of ZnO based particles by aerosol spray pyrolysis. in Thin Solid Films. 1997;296(1-2):44-48.
doi:10.1016/S0040-6090(96)09358-3
https://hdl.handle.net/21.15107/rcub_dais_12875 .
Milošević, Olivera, Gagić, Vladimir, Vodnik, Jože, Mitrović, Aleksandra, Karanović, Ljiljana, Stojanović, Biljana, Živković, Ljiljana, "Synthesis and deposition of ZnO based particles by aerosol spray pyrolysis" in Thin Solid Films, 296, no. 1-2 (1997):44-48,
https://doi.org/10.1016/S0040-6090(96)09358-3 .,
https://hdl.handle.net/21.15107/rcub_dais_12875 .
23
25
23