TY  - JOUR
AU  - Milutinov, M.
AU  - Nikolić, Maria Vesna
AU  - Luković, Miloljub D.
AU  - Blaž, Nelu
AU  - Labus, Nebojša
AU  - Živanov, Ljiljana D.
AU  - Aleksić, Obrad S.
PY  - 2016
UR  - https://dais.sanu.ac.rs/123456789/2321
AB  - In this work we have analyzed how milling starting commercial Mn–Zn powder prior to the sintering process has an influence on electrical conductivity, relative permittivity and complex impedance in the frequency range from 100 Hz to 1 GHz and relative permeability in the frequency range 1–500 MHz. Starting powders additionally were milled for 30, 60, 120 and 240 min followed by sintering disk samples between 900 and 1300 °C. Structural properties were analyzed using XRD and SEM analysis. Milling the starting powder reduced grain and crystallite size, but longer milling leads to agglomeration and consequently an inhomogeneous microstructure that was more expressed at higher sintering temperatures. Milling the starting powder improved relative permeability, reaching a maximum for samples of starting powder milled for 60 min and sintered at 1200 °C.
PB  - Springer
T2  - Journal of Materials Science: Materials in Electronics
T1  - Influence of starting powder milling on structural properties, complex impedance, electrical conductivity and permeability of Mn–Zn ferrite
SP  - 11856
EP  - 11865
VL  - 27
IS  - 11
DO  - 10.1007/s10854-016-5328-1
UR  - https://hdl.handle.net/21.15107/rcub_dais_2321
ER  - 

@article{
author = "Milutinov, M. and Nikolić, Maria Vesna and Luković, Miloljub D. and Blaž, Nelu and Labus, Nebojša and Živanov, Ljiljana D. and Aleksić, Obrad S.",
year = "2016",
abstract = "In this work we have analyzed how milling starting commercial Mn–Zn powder prior to the sintering process has an influence on electrical conductivity, relative permittivity and complex impedance in the frequency range from 100 Hz to 1 GHz and relative permeability in the frequency range 1–500 MHz. Starting powders additionally were milled for 30, 60, 120 and 240 min followed by sintering disk samples between 900 and 1300 °C. Structural properties were analyzed using XRD and SEM analysis. Milling the starting powder reduced grain and crystallite size, but longer milling leads to agglomeration and consequently an inhomogeneous microstructure that was more expressed at higher sintering temperatures. Milling the starting powder improved relative permeability, reaching a maximum for samples of starting powder milled for 60 min and sintered at 1200 °C.",
publisher = "Springer",
journal = "Journal of Materials Science: Materials in Electronics",
title = "Influence of starting powder milling on structural properties, complex impedance, electrical conductivity and permeability of Mn–Zn ferrite",
pages = "11856-11865",
volume = "27",
number = "11",
doi = "10.1007/s10854-016-5328-1",
url = "https://hdl.handle.net/21.15107/rcub_dais_2321"
}

Milutinov, M., Nikolić, M. V., Luković, M. D., Blaž, N., Labus, N., Živanov, L. D.,& Aleksić, O. S.. (2016). Influence of starting powder milling on structural properties, complex impedance, electrical conductivity and permeability of Mn–Zn ferrite. in Journal of Materials Science: Materials in Electronics
Springer., 27(11), 11856-11865.
https://doi.org/10.1007/s10854-016-5328-1
https://hdl.handle.net/21.15107/rcub_dais_2321

Milutinov M, Nikolić MV, Luković MD, Blaž N, Labus N, Živanov LD, Aleksić OS. Influence of starting powder milling on structural properties, complex impedance, electrical conductivity and permeability of Mn–Zn ferrite. in Journal of Materials Science: Materials in Electronics. 2016;27(11):11856-11865.
doi:10.1007/s10854-016-5328-1
https://hdl.handle.net/21.15107/rcub_dais_2321 .

Milutinov, M., Nikolić, Maria Vesna, Luković, Miloljub D., Blaž, Nelu, Labus, Nebojša, Živanov, Ljiljana D., Aleksić, Obrad S., "Influence of starting powder milling on structural properties, complex impedance, electrical conductivity and permeability of Mn–Zn ferrite" in Journal of Materials Science: Materials in Electronics, 27, no. 11 (2016):11856-11865,
https://doi.org/10.1007/s10854-016-5328-1 .,
https://hdl.handle.net/21.15107/rcub_dais_2321 .