Influence of Sintering Atmosphere on the Crystal Structure, Microstructure, Dielectric and Optical Properties of BaTi1-xSnxO3 (x = 0, 0.05 and 0.1) Ceramics
2015
Аутори
Marković, SmiljaVeselinović, Ljiljana
Garaj, Andrej
Cvjetićanin, Nikola
Škapin, Srečo Davor
Uskoković, Dragan
Конференцијски прилог (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Due to specific dielectric and ferroelectric properties, functional ceramics based on barium titanate (BaTiO3) have found application in semiconductor industries. Appropriate electrical properties of barium titanate-based materials, such as magnitude of relative dielectric permittivity and the Curie temperature, can be achieved by varying sintering conditions (which influenced ceramics’ microstructure) and/or by doping with various cations.
In this study, we investigated the influence of sintering atmosphere (air and argon) on the crystal structure, microstructure, dielectric and optical properties of barium titanate-stannate (BTS; BaTi1-xSnxO3) ceramics. The BTS powders (with x = 0, 0.05 and 0.1; denoted BT, BTS5 and BTS 10, respectively) were synthesized by the solid-state reaction technique. The powders were subsequently uniaxially pressed (P = 240 MPa) into cylindrical compacts (ø 6 mm and h ≈ 2 mm) and sintered in SETSYS TMA (Setaram Instrumentation, Caluire, France). Sintering e...xperiments were performed at a heating rate of 10 °/min up 1420 °C and with a dwell time of 2 hours; to determine the influence of sintering atmosphere, two sets of experiments were performed: (1) in air, and (2) in Ar. During sintering, the shrinkage was recorded in the axial (h) direction. The crystal structure of the BTS ceramics was studied at room temperature by X-ray diffractometry and Raman spectroscopy. The microstructure and chemical (Ti/Sn) composition were examined by SEM–EDS methods. The electrical measurements were made in air, at 1 kHz using a Wayne Kerr Universal Bridge B224; the measurements were done in cooling, from 160 to 20 °C. For optical characterization UV-Vis diffusive reflectance and photoluminescence spectroscopy were employed. A profound effect of an argon atmosphere on the examined properties of the sintered BTS ceramics has been found; the mostly important is an increase of the magnitude of relative dielectric permittivity.
Кључне речи:
barium titanate-stannate / semiconductors / sinteringИзвор:
Programme and The Book of Abstracts / Seventeenth Annual Conference YUCOMAT 205, Herceg Novi, August 31– September 4, 2015, 2015, 14-14Издавач:
- Belgrade : Materials Research Society of Serbia
Финансирање / пројекти:
- Молекуларно дизајнирање наночестица контролисаних морфолошких и физичко-хемијских карактеристика и функционалних материјала на њиховој основи (RS-MESTD-Integrated and Interdisciplinary Research (IIR or III)-45004)
Институција/група
Институт техничких наука САНУ / Institute of Technical Sciences of SASATY - CONF AU - Marković, Smilja AU - Veselinović, Ljiljana AU - Garaj, Andrej AU - Cvjetićanin, Nikola AU - Škapin, Srečo Davor AU - Uskoković, Dragan PY - 2015 UR - https://dais.sanu.ac.rs/123456789/828 AB - Due to specific dielectric and ferroelectric properties, functional ceramics based on barium titanate (BaTiO3) have found application in semiconductor industries. Appropriate electrical properties of barium titanate-based materials, such as magnitude of relative dielectric permittivity and the Curie temperature, can be achieved by varying sintering conditions (which influenced ceramics’ microstructure) and/or by doping with various cations. In this study, we investigated the influence of sintering atmosphere (air and argon) on the crystal structure, microstructure, dielectric and optical properties of barium titanate-stannate (BTS; BaTi1-xSnxO3) ceramics. The BTS powders (with x = 0, 0.05 and 0.1; denoted BT, BTS5 and BTS 10, respectively) were synthesized by the solid-state reaction technique. The powders were subsequently uniaxially pressed (P = 240 MPa) into cylindrical compacts (ø 6 mm and h ≈ 2 mm) and sintered in SETSYS TMA (Setaram Instrumentation, Caluire, France). Sintering experiments were performed at a heating rate of 10 °/min up 1420 °C and with a dwell time of 2 hours; to determine the influence of sintering atmosphere, two sets of experiments were performed: (1) in air, and (2) in Ar. During sintering, the shrinkage was recorded in the axial (h) direction. The crystal structure of the BTS ceramics was studied at room temperature by X-ray diffractometry and Raman spectroscopy. The microstructure and chemical (Ti/Sn) composition were examined by SEM–EDS methods. The electrical measurements were made in air, at 1 kHz using a Wayne Kerr Universal Bridge B224; the measurements were done in cooling, from 160 to 20 °C. For optical characterization UV-Vis diffusive reflectance and photoluminescence spectroscopy were employed. A profound effect of an argon atmosphere on the examined properties of the sintered BTS ceramics has been found; the mostly important is an increase of the magnitude of relative dielectric permittivity. PB - Belgrade : Materials Research Society of Serbia C3 - Programme and The Book of Abstracts / Seventeenth Annual Conference YUCOMAT 205, Herceg Novi, August 31– September 4, 2015 T1 - Influence of Sintering Atmosphere on the Crystal Structure, Microstructure, Dielectric and Optical Properties of BaTi1-xSnxO3 (x = 0, 0.05 and 0.1) Ceramics SP - 14 EP - 14 UR - https://hdl.handle.net/21.15107/rcub_dais_828 ER -
@conference{ author = "Marković, Smilja and Veselinović, Ljiljana and Garaj, Andrej and Cvjetićanin, Nikola and Škapin, Srečo Davor and Uskoković, Dragan", year = "2015", abstract = "Due to specific dielectric and ferroelectric properties, functional ceramics based on barium titanate (BaTiO3) have found application in semiconductor industries. Appropriate electrical properties of barium titanate-based materials, such as magnitude of relative dielectric permittivity and the Curie temperature, can be achieved by varying sintering conditions (which influenced ceramics’ microstructure) and/or by doping with various cations. In this study, we investigated the influence of sintering atmosphere (air and argon) on the crystal structure, microstructure, dielectric and optical properties of barium titanate-stannate (BTS; BaTi1-xSnxO3) ceramics. The BTS powders (with x = 0, 0.05 and 0.1; denoted BT, BTS5 and BTS 10, respectively) were synthesized by the solid-state reaction technique. The powders were subsequently uniaxially pressed (P = 240 MPa) into cylindrical compacts (ø 6 mm and h ≈ 2 mm) and sintered in SETSYS TMA (Setaram Instrumentation, Caluire, France). Sintering experiments were performed at a heating rate of 10 °/min up 1420 °C and with a dwell time of 2 hours; to determine the influence of sintering atmosphere, two sets of experiments were performed: (1) in air, and (2) in Ar. During sintering, the shrinkage was recorded in the axial (h) direction. The crystal structure of the BTS ceramics was studied at room temperature by X-ray diffractometry and Raman spectroscopy. The microstructure and chemical (Ti/Sn) composition were examined by SEM–EDS methods. The electrical measurements were made in air, at 1 kHz using a Wayne Kerr Universal Bridge B224; the measurements were done in cooling, from 160 to 20 °C. For optical characterization UV-Vis diffusive reflectance and photoluminescence spectroscopy were employed. A profound effect of an argon atmosphere on the examined properties of the sintered BTS ceramics has been found; the mostly important is an increase of the magnitude of relative dielectric permittivity.", publisher = "Belgrade : Materials Research Society of Serbia", journal = "Programme and The Book of Abstracts / Seventeenth Annual Conference YUCOMAT 205, Herceg Novi, August 31– September 4, 2015", title = "Influence of Sintering Atmosphere on the Crystal Structure, Microstructure, Dielectric and Optical Properties of BaTi1-xSnxO3 (x = 0, 0.05 and 0.1) Ceramics", pages = "14-14", url = "https://hdl.handle.net/21.15107/rcub_dais_828" }
Marković, S., Veselinović, L., Garaj, A., Cvjetićanin, N., Škapin, S. D.,& Uskoković, D.. (2015). Influence of Sintering Atmosphere on the Crystal Structure, Microstructure, Dielectric and Optical Properties of BaTi1-xSnxO3 (x = 0, 0.05 and 0.1) Ceramics. in Programme and The Book of Abstracts / Seventeenth Annual Conference YUCOMAT 205, Herceg Novi, August 31– September 4, 2015 Belgrade : Materials Research Society of Serbia., 14-14. https://hdl.handle.net/21.15107/rcub_dais_828
Marković S, Veselinović L, Garaj A, Cvjetićanin N, Škapin SD, Uskoković D. Influence of Sintering Atmosphere on the Crystal Structure, Microstructure, Dielectric and Optical Properties of BaTi1-xSnxO3 (x = 0, 0.05 and 0.1) Ceramics. in Programme and The Book of Abstracts / Seventeenth Annual Conference YUCOMAT 205, Herceg Novi, August 31– September 4, 2015. 2015;:14-14. https://hdl.handle.net/21.15107/rcub_dais_828 .
Marković, Smilja, Veselinović, Ljiljana, Garaj, Andrej, Cvjetićanin, Nikola, Škapin, Srečo Davor, Uskoković, Dragan, "Influence of Sintering Atmosphere on the Crystal Structure, Microstructure, Dielectric and Optical Properties of BaTi1-xSnxO3 (x = 0, 0.05 and 0.1) Ceramics" in Programme and The Book of Abstracts / Seventeenth Annual Conference YUCOMAT 205, Herceg Novi, August 31– September 4, 2015 (2015):14-14, https://hdl.handle.net/21.15107/rcub_dais_828 .