Structural and magnetic properties of nanocrystalline bismuth manganite obtained by mechanochemical synthesis
Само за регистроване кориснике
2011
Аутори
Marinković Stanojević, ZoricaBranković, Zorica
Jagličić, Zvonko
Jagodič, Marko
Mančić, Lidija
Bernik, Slavko
Rečnik, A.
Branković, Goran
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
We have studied the formation of BiMnO3 (BMO) nanocrystalline perovskite powder produced by high-energy milling of the constituent oxides. The crystal structure and the amount of crystalline and amorphous phases in the powder as a function of the milling time were determined with XRPD using Rietveld refinement. BMO perovskite formed directly from highly activated nano-sized constituent oxides after 240 min of milling and subsequently grew during prolonged milling. The morphology, structure, and chemical composition of the powder were investigated by SEM and TEM. A clear ferromagnetic transition was observed at T C ~66 K for a sample milled for 240 min and increased with milling time. The magnetic hysteresis behavior is similar to that of a soft ferromagnet. The magnetic properties of the obtained BMO powders were found to change as a function of milling time in a manner consistent with variations in the nanocomposite microstructure.
Кључне речи:
milling / X-ray / TEM / magnetic properties / bismuth manganite / nanocompositesИзвор:
Journal of Nanoparticle Research, 2011, 13, 8, 3431-3439Издавач:
- Springer Netherlands
Финансирање / пројекти:
- 0-3D наноструктуре за примену у електроници и обновљивим изворима енергије: синтеза, карактеризација и процесирање (RS-MESTD-Integrated and Interdisciplinary Research (IIR or III)-45007)
DOI: 10.1007/s11051-011-0265-7
ISSN: 1388-0764 (Print); 1572-896X
WoS: 000292749100035
Scopus: 2-s2.0-80051596785
Институција/група
Институт техничких наука САНУ / Institute of Technical Sciences of SASATY - JOUR AU - Marinković Stanojević, Zorica AU - Branković, Zorica AU - Jagličić, Zvonko AU - Jagodič, Marko AU - Mančić, Lidija AU - Bernik, Slavko AU - Rečnik, A. AU - Branković, Goran PY - 2011 UR - https://dais.sanu.ac.rs/123456789/712 AB - We have studied the formation of BiMnO3 (BMO) nanocrystalline perovskite powder produced by high-energy milling of the constituent oxides. The crystal structure and the amount of crystalline and amorphous phases in the powder as a function of the milling time were determined with XRPD using Rietveld refinement. BMO perovskite formed directly from highly activated nano-sized constituent oxides after 240 min of milling and subsequently grew during prolonged milling. The morphology, structure, and chemical composition of the powder were investigated by SEM and TEM. A clear ferromagnetic transition was observed at T C ~66 K for a sample milled for 240 min and increased with milling time. The magnetic hysteresis behavior is similar to that of a soft ferromagnet. The magnetic properties of the obtained BMO powders were found to change as a function of milling time in a manner consistent with variations in the nanocomposite microstructure. PB - Springer Netherlands T2 - Journal of Nanoparticle Research T1 - Structural and magnetic properties of nanocrystalline bismuth manganite obtained by mechanochemical synthesis SP - 3431 EP - 3439 VL - 13 IS - 8 DO - 10.1007/s11051-011-0265-7 UR - https://hdl.handle.net/21.15107/rcub_dais_712 ER -
@article{ author = "Marinković Stanojević, Zorica and Branković, Zorica and Jagličić, Zvonko and Jagodič, Marko and Mančić, Lidija and Bernik, Slavko and Rečnik, A. and Branković, Goran", year = "2011", abstract = "We have studied the formation of BiMnO3 (BMO) nanocrystalline perovskite powder produced by high-energy milling of the constituent oxides. The crystal structure and the amount of crystalline and amorphous phases in the powder as a function of the milling time were determined with XRPD using Rietveld refinement. BMO perovskite formed directly from highly activated nano-sized constituent oxides after 240 min of milling and subsequently grew during prolonged milling. The morphology, structure, and chemical composition of the powder were investigated by SEM and TEM. A clear ferromagnetic transition was observed at T C ~66 K for a sample milled for 240 min and increased with milling time. The magnetic hysteresis behavior is similar to that of a soft ferromagnet. The magnetic properties of the obtained BMO powders were found to change as a function of milling time in a manner consistent with variations in the nanocomposite microstructure.", publisher = "Springer Netherlands", journal = "Journal of Nanoparticle Research", title = "Structural and magnetic properties of nanocrystalline bismuth manganite obtained by mechanochemical synthesis", pages = "3431-3439", volume = "13", number = "8", doi = "10.1007/s11051-011-0265-7", url = "https://hdl.handle.net/21.15107/rcub_dais_712" }
Marinković Stanojević, Z., Branković, Z., Jagličić, Z., Jagodič, M., Mančić, L., Bernik, S., Rečnik, A.,& Branković, G.. (2011). Structural and magnetic properties of nanocrystalline bismuth manganite obtained by mechanochemical synthesis. in Journal of Nanoparticle Research Springer Netherlands., 13(8), 3431-3439. https://doi.org/10.1007/s11051-011-0265-7 https://hdl.handle.net/21.15107/rcub_dais_712
Marinković Stanojević Z, Branković Z, Jagličić Z, Jagodič M, Mančić L, Bernik S, Rečnik A, Branković G. Structural and magnetic properties of nanocrystalline bismuth manganite obtained by mechanochemical synthesis. in Journal of Nanoparticle Research. 2011;13(8):3431-3439. doi:10.1007/s11051-011-0265-7 https://hdl.handle.net/21.15107/rcub_dais_712 .
Marinković Stanojević, Zorica, Branković, Zorica, Jagličić, Zvonko, Jagodič, Marko, Mančić, Lidija, Bernik, Slavko, Rečnik, A., Branković, Goran, "Structural and magnetic properties of nanocrystalline bismuth manganite obtained by mechanochemical synthesis" in Journal of Nanoparticle Research, 13, no. 8 (2011):3431-3439, https://doi.org/10.1007/s11051-011-0265-7 ., https://hdl.handle.net/21.15107/rcub_dais_712 .